w300i Flashing White Screen

Hi all...

I started a w300i config error a while back...
Now...ive forgotten about the phone...gotten me a very uncomfortable motorola and moved on. But like all ex-es...sometimes u just get a urge to use ur old phone. Well. lol. I tried putting it on again and all i get is a slowly flashing white screen...as in. Nothing. Just white...black......white...black......u get the picture. Now ive profiled it with both SEtoollite and XS++

and this is what i get...:confused:

SEToolLite:

welcome to setool2 lite edition v 1.06
supported DB2010/DB2012 CID49, DB2020 CID49/CID51/CID52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:354xxxxxx5591 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:EUROPE_2
CDA article: CDA102665/11
CDA version: R2A
Default article: cxc1123203
Default version: R4EA031

Operator: 000-00

USERCODE:2580

Elapsed:8 secs.

And with XS++:

17:24:43|

17:24:43| Attempting to open the interface...

17:24:43|

17:24:43| TURN OFF PHONE!

17:24:43| Hold 'C' button on phone and connect phone NOW.

17:24:43| You have 30 seconds...

17:24:43|

17:24:47| Baseband ID: 8040

17:24:47| Protocol Version: 3.1

17:24:47|

17:24:47| Sending db2010_cid00_prodid_p3l.bin...

17:24:47| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

17:24:47| This is a PRODUCTION_ID loader

17:24:47| Activating GDFS...

17:24:48| Phone name detected!

17:24:48|

17:24:48| Profiling SEMC phone...

17:24:48| Platform: DB2010

17:24:48| OTP CID: 49

17:24:48| EROM CID: 49

17:24:48| EROM Color: Red

17:24:48| IMEI: 35424401xxxxxx

17:24:48| Phone ID: W300

17:24:48| Region: EUROPE_2

17:24:48| CDA: CDA102665/11 R2A

17:24:48| Firmware Version: R4EA031

17:24:48| EROM: n/a

17:24:48| Ready for operation!

17:25:05| Sendinging shutdown signal to phone...

17:25:05| Done.. You may now connect again...

17:25:05| Shutting down...

if ur just as :confused: as me...dont reply...lol
So...yeah...help...somebody?:o

Slowly flashing screen may indicate a bricked GDFS but your logs don't look like that...
Where are you from?

Cape Town, South Africa...and what is a bricked gdfs??? and how do i fix that?

The GDFS contains calibration data of your phone. The phone is not able to boot up if the GDFS is bricked.
Unfortunately there is no free/cracked software available to revive the W300's GDFS.
A GDFS is unique to the phone, you can't flash another GDFS to it unless it's your own.
At least not if you don't own the soft-/hardware to do it.

I just read through your other thread. I really don't know what to do right now.
You should try to write EROM, do a fullflash and then write back the backup of your GDFS. But I think you've already done that so...:confused:

Ok...maybe i didnt do all that in the rite order...
could u just run through in what order i should do all that...And do i put the EROM file in the FS?

No. You'll Have To Place The EROM File In MAIN.

So does anyone know what i have to do???

okay, this just happened to me....

i just did a full reflash and it worked

Well could u explain the full reflashing process in detail please then...caus i must be doing something wrong somewhere...

Like what file when...when to take the fone out before doing another section all that...Caus the fones just flashing white and black now...and it picks up fine on XS++...

So if ud be so kind...could u tell me step by step how u did it...

okay, i used SETOOL and the latest R9 firmware....illpost instructions after work...

Hey, edit immediately you Imei!!!


for security!!!

Thanks a lot...hope it works. Ive never used SETool tho...so i dont know where to put what files and in wat order and stuff. Or what version of the file i should be downloading. I know its really dumb but im learning.

ok, its not hard...

Download SETOOL.. Use the search function
Run SETOOL
Choose your phone type
Now, Press ADD and add your firmware files
and press flash.
After flash a custom pack on it.

Hope it works for you