Printable View
Hi...
I'm trying to back up the GDFS of my W850i with SE Tool Lite 1.11. I connected the phone and click on "Identify" first.
Then I selected the phone model and without disconnecting it I clicked on "Read GDFS". The program said "Will backup GDFS now" and then green progress bar has been running for a long time (several minutes). I don't if this is normal.
Could someone tell me if I did something wrong?
Thanks a lot!
Back-up your GDFS file and write your GDFS.
or you can tried with xs++.Quote:
Look to the left column and down you will see a button called “Read GDFS”. Click it, and then hold down the C button on your phone, and then plug in the cable. Eventually it will get to a point , where it says “PROGRAMMING FLASH”. Once it says Unplug the cable , then Unplug your phone, take the battery out, put the battery back in, hold down C, press the “READY” button, then plug the phone back in, BUT right after you plug it in, about 2 seconds after or so, release the C button. SETool 2 Lite will now read the GDFS and then it will say “Getting GDFS Chunk” , and then once it has fully read your GDFS, you can click “Quit”.Take the battery out for about 20 seconds, and then put it back in.
"Write gdfs" will write gdfs to phone in BINARY format. File selected in "MISC. Box" will be assumed as gdfs in binary format.
XS++ 3.1 Guide-Flashing,Customizing,Recovering
Nice day
Thanks a lot, Jasmin!
I think my mistake was that I did not unplug the phone after the "identification process" and I clicked on "Read GDFS" right away. If it safe to stop the process of unplug the phone under those conditions?
I tried to backup GDFS following the instructions provided here, but it failed. I wonder if someone could help me. This is the SE Tool 2 Lite log:
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101646069 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
llbug: can't get all data, got:28672 expected:32359
Failed.
Elapsed:156 secs.
You would have to disconnect the phone and plug it back in after clicking on read gdfs
Thanks, actux. I did that, but for some reason the backup couldn't be completed with SEtool2 lite. I decided to try it with XS++ 3.1 as jasmin suggested and everything ran smoothly.
i sure you dont install driver(Semc).frist install w850 driver(use cd)and after install usb flash driver(semc).it's in ...\Setool2lite v1.10\drivers\USBFlash_driver
I think, that this programms - XS++ 3.1 your helping :)
:Dmarn, u r right first we need to make sure we have installed driver properly and the phone is detected by computer, most get stuk at driver stage , who will drive ur phone!:rolleyes::rolleyes::rolleyes:
thank you so much for the trick. work fine to my phone :D
best regrad
Try to BackUp GDFS with XS++ 3.1
thank BackUp GDFS !
If there is no original backup.Solve?
I have No Backup from my GDFS (K810i)
Can I download a Backup from here and write it back?
You can't because the gdfs is unique to each phone. If you write a differente gdfs, your phone will be dead.Quote:
Originally Posted by schmarakel