HELP: White Screen K800, now DEAD!

i was just using my phone normally when it happened! I have never flashed it ever, but I was just talkin normally with my friend until it turned off.

I tried turning it on after, and i get a white screen and it freezes at the sony logo afterwards. now, my phone doesn't turn on at all, even after i tried "charging" it to the max(the charging screen doesn't even show anymore).

When i try to turn it on by pressing the power button, there's this RED IR light that flashes inside on the bottom right side of the phone for some reason. but the phone just doesnt turn on at all.

i'm a noobie to these phone flashing and stuff, anyone know what the problem is and how to fix it, if possible!?

The 1 year manufacturer warranty just expired like 2 months ago too! :(

A sign of a dead erom is a blinking red led in the infra red port.

REPAIRING EROM GUIDES for most sonyericsson phones

Nice day

Quote:

---

Originally Posted by jasmin

A sign of a dead erom is a blinking red led in the infra red port.

REPAIRING EROM GUIDES for most sonyericsson phones

Nice day

---

Thanks for the tip. But i was trying to detect my CID first by connecting my phone with XS++ 3.1 . After holding C, and connecting the USB cable to my phone, i get this message from XS++:

Error: Cannot open phone communication port
Disconnected... Unplug the phone

I already installed the USB Flash Drivers (gordon's Flash drivers) and did exactly as i should, but still doesn't detect my phone.

What is the problem now? am i supposed to install the "cruiser drivers" or is there just something REALLY wrong with my phone? ? thanks in advance

How to solve "Error: Cannot open phone communication port" problem.

Quote:

---

Due to many users having this problem, I'm posting a guide on how to solve it.

Basicly, you need to install the drivers for your phone, they are special flash drivers different from the PC Suite drivers.

To install them you need SEUS (Sony Ericsson Update Service) downloaded and installed on your PC (Windows XP SP2 & Vista 32bit only).

Run the program, go through the steps and then connect your phone (when it says to).
Once connected, click the "Back to Start" button (or if available, you can download the newer firmware if you want to).

The drivers should then be installed, and your phone should now be able to be used with XS++ .

---

Nice day

The drivers are already installed if he used Gordon.

Usually the phone does not get recognized if you just press C.
Use 2+5 instead.
Also, I would recommend you trying the SEKing solution.

Quote:

---

Originally Posted by justme

The drivers are already installed if he used Gordon.

Usually the phone does not get recognized if you just press C.
Use 2+5 instead.
Also, I would recommend you trying the SEKing solution.

---

Hey ! holding 2+5 worked in connecting, but it doesn't read the CID of my phone...all i get in the log is this now:

03:02:27| Baseband ID: 9900
03:02:27| Protocol Version: 3.1

And then no more information :(

Could it be that I installed the wrong drivers for my USB cable?
How else do i get more info?

I would try SEKing but i don't think it will tell me which CID version i have because I don't know the CID # of my phone yet. So i must use XS++ to find it out first before using SEKING. :(
thanks

follow the setool2 lite or wotan guide you connect your phone to them by holding down 2+5

Unfortunately it seems like Wotan has disabled the DB2020 EROM upgrade for free...

when did that happen???

I'm not sure, I couldn't upgrade the EROM some days ago.
I'll try again in a few minutes. Maybe you could try it, too, so we can surely confirm that.
Wotan didn't announce anything.

Edit: It's definitely not working for me. Wotan demands a login.

Quote:

---

Connect your phone, pressing "C"
waiting...
phone found.
phone found at position 2
DB2020 detected
CL00 CI00 OCI00 __ __ __ SL00 OCL00 __
LOADER: OK
061220 1711 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3K
FC ID: 89 7E
Define login and password!
== FAILED ==
Duration: 00:01

---

i'm already cid:52 so it won't work anyway, are you holding down 2+5 and not C, from your log it looks like your holding down C instead of 2+5

Quote:

---

Originally Posted by number1

i'm already cid:52 so it won't work anyway, are you holding down 2+5 and not C, from your log it looks like your holding down C instead of 2+5

---

Yea, i am holding down 2+5 and it does connect to the program and works abit by showing only:

03:02:27| Baseband ID: 9900
03:02:27| Protocol Version: 3.1

THATS ALL, no other info about my CID!

but when i try holding down "C" instead, i get nothing and it can't even connect at all!

Any other help? thanks

i got the same that puneater:

23:04:17| You have 30 seconds...
23:04:17|
23:04:24| Baseband ID: 9900
23:04:24| Protocol Version: 3.1

can u help us please"!!!... or puneater, finaly can you do it or what happend???

lalosrt, i just gave it to some cell phone tech ppl to help me fix it, paid $25 CAN. owell. i'm getting it back tomorrow, hopefully they will have fixed the problem.

Use Seking ,it Can Fix Erom And Flash Clear Phone By Buying Crdits From Them