w810 unlocking

I need your help again.
My w810 is totally useless, sony ericsson authorized service said "your phone is dead" and the last thing I did purchase Sony ericsson cruiser cable from GSMLiberty.com. I`ve been waiting more than one week for it and here in New Zealand.
However, the phone freezes on "Please wait screen". In service menu everything is locked Network, Network subset, SP, Corporate, ESL. Can I do anything else with my dcu-60 cable to unlock/repair it.
P.S. I don`t have gdfs backup :(
Thank You!

you can flash it with dcu-60 with setool lite
br

Please post up you identify log of SE Tool lite or XS++.
Which service menu? How do you access your service menu if the phone's stuck on please wait?!

You can flash it with the DCU-60.
You can unlock it with the cruiser cable.
If it's CID49 you can also unlock it with DCU-60 via patch.

Pictures and the log:

Code:

---

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100------ CERT:RED
FLASH CID:49 COLOR:RED
 
MAPP CXC article: R4EA031    prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_1
CDA article: CDA102555/10
CDA version: R10A
Default article: cxc1250324
Default version: R4EK001
 
Operator: 000-00
 
USERCODE:0000
 
Elapsed:5 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100------ CERT:RED
FLASH CID:49 COLOR:RED
 
MAPP CXC article: R4EA031    prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_1
CDA article: CDA102555/10
CDA version: R10A
Default article: cxc1250324
Default version: R4EK001
 
Operator: 000-00
 
USERCODE:0000
 
Elapsed:7 secs.
Elapsed:7 secs.

---

your phones not dead just needs reflashing im sure some people om here will tell you what you need to do

I`ve tried so many times flash main + fs + customization + patches. Unlock/repair through SeTool2 Lite and clean gdfs as well. Any other advices?

It is a software problem.You can reflash it.It that doesnt work go to service

Quote:

---

Originally Posted by cedry2k

It is a software problem.You can reflash it.It that doesnt work go to service

---

Have you read first post?

Quote:

---

Originally Posted by moderateee

I`ve tried so many times flash main + fs + customization + patches. Unlock/repair through SeTool2 Lite and clean gdfs as well. Any other advices?

---

First technical opinion: you NEED to be absolutely sure ALL files (main, FS, custom and patch) are coherent, i.e. same version, and so on.

Last chance: maybe some Maori chaman did cast a spell on your handset, you COULD try and sing a haka before giving it a new try. I've been told it sometimes helped...
:cool:

if you have cruiser service cable, use it with usbsmart 8.4 and try to:
select repair tab
select rebuild sp area
select remake CRCs
press do selected jobs

Could it be that CDA102555/10 is wrong

use X++
goto - Select Customise, choose your region & re-flash (just the customise, and not the Main and FS)
I had the same error midway through my unlocking process (froze on "Please wait screen". , as soon I changed to the correct CDA relating to my region, this then worked. :)

The cable, which I ordered 3 weeks ago, finally arrived today. I installed total multiserver usb drives and tried to identify the phone via Setool2 lite, xs++ and semctool 8.4 but the computer couldn`t recognize the phone. Any suggestion what shoud I do?

And why the name of the cable i total multiserver cable? Can i use it with other applications such as SEMCTool, XS++ ... ?

I use This drivers, the cable is Total MultiServer 2 in 1. Is that the right drivers?

P.S. OMG! Remember you may need a 9V battery for use with this cable. ???
Is it true? If it is, that means the cable is useless and I can`t repair my w810 by myself, cause the battery is 3.6V :(

Ok,i Want To　ＫＮＯｗ　ＴＯＯ．

I`m so happy, the phone is revived. The explanation is in next lines.
First, change the port of the cable, the default port is com16. What have i done?
In device manager, change COM1 port to COM33(In example). After that move "total multiserver cable" to com1 - very easy:p. After that I executed the following script:

Quote:

---

Here is guide (v1) how to full repair W810

Usualy with this procedure can be solved ANY software problems
(dead, Please Wait, ...)

1. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- Complete phone after flash - NOT Checked
- Recover Certificate - NOT Checked
- Flash MAIN file from MAIN directory (better latest version)
- Not need to use Test Point on phone

2. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- Complete phone after flash - NOT Checked
- Recover Certificate - NOT Checked
- Flash FS file from FS directory (same version as MAIN file)
- Not need to use Test Point on phone

3. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- Complete phone after flash - NOT Checked
- Recover Certificate - NOT Checked
- Flash W810_EEPROM_Area_Flash.mbn as MAIN file
- Not need to use Test Point on phone

4. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- On Repair tab mark Rebuild SP Area and Remake CRC's
- Do Selected Jobs
- Not need to use Test Point on phone

5. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- On Unlock tab mark Clear SP Locks
- Do Selected Jobs
- Not need to use Test Point on phone

6. - Use Test Point - NOT Checked
- Skip TP when flash MAIN, FS - NOT Checked
- Complete phone after flash - Checked
- Recover Certificate - NOT Checked
- Remove all filenames from MAIN and FS edit boxes
- Not need to use Test Point on phone

---

The duration of the whole process was apr 15 minutes.
Now I have a minor problem with the brightness of the display. It`s not fully brightly. When I`m turning on the phone, the first screen (white for 2 seconds) is fully bright, but after that it`s a little bit darkened.
Thank you to every who helped me, with suggestion, I really appreciate your assistance! Thank you again and sorry for my English!

I'm having the same problem with my phone, but I'm unable to get SEMC version 8.4 or 8.7 to function for me. I have the multiserver cable, which I also assigned to COM1, but it just sits there waiting at "switch phone on". I am able to flash the phone with xs++ and setool, I've also customized the phone, but it always goes back to the Please wait and does nothing else. Could you post some photos since you were able to fix your phone?

Thanks

Rob

I got the TMS cable and SEMCtool working when I read in a forum that you have to use the cruiser cable selection. I thought I had, but tried it again, selected Read Codes and Clear Codes. Boom two weeks of fiddling with the phone and the problem is finally solved. Now I'm going to sell the phone, I like SonyEricssons, but I am tired of the sony special memory sticks, no DV2P support for MP3 player and the inconvient headphone jack, which was always falling out while I was running or working out. I've switched to Motorola A1200 or Ming. I love it, feature rich and beautiful form.

Thanks for all the support on this great forum. Do you have a motorola forum too?

Anyone like to buy a discounted TMS cable? bmrgato@hotmail.com

Rob

Quote:

---

Originally Posted by bmrgato

multiserver cable, which I also assigned to COM1, but it just sits there waiting at "switch phone on"
Rob

---

you need to go to my computer, device manager and check on wich port your cable is installed.
then go back tu semctool usbsmart 8.4 and modify the port according to what you have read there in device manager
you will be able to see the port cable is installed only if the cable is plugged in and drivers are installed, under port (com & lpt)