How to install usb flash driver

I connect my w580i with my computer. I found new hardware. I browse it to the folder which has the install file I downloaded from some link in this forum. However, it doesn't matter which one I use, it doesn't install. How to unstall usb flash driver? Anybody show me the guide, please! And remember that I just connect for files transfer, not for any other things like flashing, debrand...
And after I safety remove hardware, in the phone still show "do not remove the usb cable until you have exited the application on your PC", and if I remove the usb cable, the phone automatically turn off. Is it ok?

1.Turn off phone.
2. Start XS++ and click Connect.
3. Download -> SEMP_USB_Driver.rar and click Extract Here on Desktop.
Hold "C" on phone and connect with USB cable.

4. When see Found New Hardware Wizard click:

http://img249.imageshack.us/img249/8265/98282961sc0.jpg

http://img337.imageshack.us/img337/5844/76504585zi8.jpg

http://img337.imageshack.us/img337/1774/19389555zs8.jpg

http://img337.imageshack.us/img337/9223/43285004eh4.jpg


Other variant:

Move ggsemc.sys in C:\WINDOWS\system32\drivers

Excerpt from Mr. T's tutorial on se-nse
Thanks for sharing!

usually the driver on the CD guide, insert your CD room, install se pc suite

thank you so much..
u guys really help...

Thank you. So I must install XS++ before I can install usb flash driver? I haven't install XS++ yet. It's strange, but I will try. Do I have to take my battery out before I do that?

my pc show unknown device..
how?

unknown device? it usually only says unknown device when u connect to pc without the battery in the phone. it has to be inside the phone when u connect.

If this dosen't help then there is a problem with your usb port, lead or phone. however the phone dosen't usually malfunction like that

I did install it and now I can back up, flash normally. However, everytime I start Windowns, the Hardware Updated Wizard pop up. It still says that Mass Storage Controller is not configured correctly. It is annoying. Do you know anyway to stop it???

Quote:

---

Originally Posted by mackydon

unknown device? it usually only says unknown device when u connect to pc without the battery in the phone. it has to be inside the phone when u connect.

If this dosen't help then there is a problem with your usb port, lead or phone. however the phone dosen't usually malfunction like that

---

battery inside.. i do want ever yr tutorial say.. but fail..
i also don't know what happen... yesterday i can connect with xs and far.. now :(:(

re-install the drivers for your phone and connect it on another USB port.

With W580i and some recently SE phone models, when you connect it to PC with file tranfer mode you don't need install any driver (with winXP). At that, your phone will turn off (not able to receiver calls). After you remove the USB cable, the phone will turn on.
To be able to flash phone you must install flash driver (this driver is attacked with SESU so you only need install this program)

Yeah, It said so in the guide. But when I click in the F driver, it say "please insert disk" or something like that. Basically, after I install the driver, I can use Far, XS++, SEtool, Phone Explore... but not the Flie transfer mode. Anyway, it doesn't matter, I like MyPhoneEx
However, everytime I start Windowns now, the Hardware Wizard pop up. It's kind of annoying. Do you know how to fix this problem?

Anybody has this problem?

I have the Update Service software of Sony Ericsson in my PC and all USB Flash Drivers come with them. Maybe there is a connection...

Well .. best way to start off with flashing is
download SEUS
update your phone.

it will take care of driver installation, virtual port creating, selection of appropriate ports for communication.

Also updates your firmware if updates available. that's with it
then directly use XS++ or SETool 2

Remember SEUS always install latest flash drivers. Which SETool 2 needs.

YEah. Let me try. Thank you!

Any one have driver SEMC USB Flash driver thank

Search, please!!! There are at least ten different link in this forum to download it!

my pc show unknown device??

USB Flash Driver Installation - Guide

Nice day

My fone(k610) can't be detected
And i didn't get the CD guide to install the se pc suite when i bought my fone
what should i do?

If you need usb drivers, look at first page, but if Pc Suite look here:

Software download

Nice day

Quote:

---

Originally Posted by pandabears

My fone(k610) can't be detected
And i didn't get the CD guide to install the se pc suite when i bought my fone
what should i do?

---

and advise would the version usb driver 2.0.0.4. with version 1.0.0.5 here be in a tight spot and phone me then didn't want detect while using SEUS II.


Yet would you all wanted ask for counsel! ;)
Appended be wedded K850i to PC and detect me ju system and were beginning me install drivers...but than drivers install,so here phone disconnect. A on PC discovered message type: New hardware wasn't installed.
My question sounds: Couldn't come to dysmnesia phone??

Ask therefore,because in original instruction to phone is writing,quote: "During transmission sets open cable USB from phone nor from PCs .,because would could come to dysmnesia phone or memory cards".

What do you mean?? :confused:
In advance thank you behind answer!

Quote:

---

Originally Posted by Mida

........but than drivers install,so here phone disconnect. A on PC discovered message type: New hardware wasn't installed.
My question sounds: Couldn't come to dysmnesia phone??

Ask therefore,because in original instruction to phone is writing,quote: "During transmission sets open cable USB from phone nor from PCs .,because would could come to dysmnesia phone or memory cards".

What do you mean?? :confused:
In advance thank you behind answer!

---

Install USB drivers: k850_usb_signed_drivers.zip

re-install the drivers for your phone and connect it on another USB port.

ANother port is not so easy to change it, man