Printable View
Okay i was putting a patch on my phone using SE Tool 2 Lite to unlock the phone, and now after finishing the patch, the phone wont turn on. Anyone know of anyways to solve this? I dont get a white screen or anything, just doesnt do anything when i turn it on...
This is the code in the patch (from se-nse.net):
;W810 SW-R4EK001
;Remove SIM-Lock
;© IronMaster
;(p) m1ch43lzm
+44140000
d12c84: 70B5041CF1F2F4FA00230022011C1C20 F0B505213A22D1F71FFD0020F0BDC046
Any help is appreciated...Thanks.
Did you click on flash or write script or write GDFS? Setools2 Lite although an amazing tool has a high density of button, so you might have clicked the wrong one by mistake.
i clicked write script...
i followed this diagram:
http://img517.imageshack.us/img517/4...chpiccycp1.png
Additional info:
When i plug the phone into XS++, it recognizes it, but doesnt show any firmware or erom available on the phone, as shown below:
http://i79.photobucket.com/albums/j1...NoFirmware.jpg
This makes me think maybe i need to reflash the phone to get all that back. I tried restoring my GDFS that i had backedup the other day, but it doesnt do anything, it just hangs up at the part that says:
23:40:46| Sending db2010_cid49red_cs_r3a010.bin...
23:40:48| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
23:40:48| This is a CHIPSELECT loader
23:40:48| Activating loader...
23:40:48| Activating GDFS..
Again any help is appreciated...
not good.. why should a vkp patch kill a phone?
Anyway as long as XS++ detects your phone it can be revived i think.
You include the .vkp in MISC section right?
I'm sorry I dont know a lot about GDFSs and your log says "cant open GDFS" quite a few times. I guess its damaged.
Alright, i ended up reflashing with wotan and fixing my own problem.
I am still curious as to why that patch screwed my firmware up?
You sure the patch works? where did you get it from?
if you get backup from your gdfs werite buckup to phone if dont have backup flash your phone by setool2lite
the patch same by youre phone firmware?
Try and remove the patch.
If you post the log, probably we can give you an answer...Quote:
Originally Posted by RUGUNIT
The log is there mate, scroll up
The only thing that i could think of is that the patch is for a different firmware than your phone was. Maybe your phone firmware wasn't R4EK001.
I got the patch code from SE-NSE.net, and made sure to match my firmware to the code supplied.
I used that <*>>*<* method or whatever it is to get my system info, and it showed that firmware as being the one currently on. I did flash with wotan once before and upgraded to the latest firmware which that is...
This is the thread i got the patch and info from:
http://forums.se-nse.net/index.php?showtopic=15614
Yes I see that, but I meant for that SETool2 Lite log, when RUGUNIT applied the patch...Quote:
Originally Posted by abmadman
Quote:
Originally Posted by simox
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35235001xxxxxx CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R4EK001 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EK001
Language Package:AMERICA_2
CDA article: CDA102555/107
CDA version: R1A
Default article: cxc1250324
Default version: R4EK001
Network LOCKED
Operator: MULTIPLE
USERCODE:0000
Elapsed:1 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35235001xxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "C:\Users\RUG\Desktop\setool2lite\rest\R4EK001_CXC 1250316_GENERIC_HN"
Starting to process VKP patch script: C:\Users\RUG\Desktop\REMOVE_SIM_LOCK_W810_R4EA031\ REMOVE SIM LOOKW810R4EK001.VKP
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E40000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:155 secs.
"can't open file "C:\Users\RUG\Desktop\setool2lite\rest\R4EK001 _CXC 1250316_GENERIC_HN""
See the patch got written succesfully but SET2 could not find the rest(ore) file .
After the break in is completed the rest file must be flashed because it is required to UNDO what the breakin loader did (which i believe is rewrite the first 4 line of the BABE header to what it was originally, do correct me if I'm wrong).
This did not happen since the REST file could not be found.
There is nothing wrong with the phone i believe, it was just that the setools.exe file couldve been moved out of its directory or some folders got misplaced.
This is my guess. :D
Well the phone reflashed correctly, but the patch did definitely wipe out my firmware...
Reflashed? Thats the point mate, the flash did nothing.
Since the restore could not be written the phone dint work. Simple. Check if your setools folder has the file R4EK001 _CXC 1250316_GENERIC_HN for your phone. thats the problem.
I reflashed with wotan...fyi...it restored the phone...but that doesnt fix the patch whoa's...i checked for the rest file in r4ek001 style, and its a no go. Its not in there. Where can i get those files from? And will that fix the problem of the patch not applying?
Thanks
Dude the patch got applied, but since you could not restore your phone nad it dint switch on u could not see it apply IMO.
The log says patch applied succesfully dont it?
Dunno where you'll find the rest file tho.. will check my setools folder.
Thanks man, i appreciate it...Quote:
Originally Posted by abmadman
Its not there either mate.. may be you should look for it in se-nse.. might find it there..
EDIT: One thing you could POSSIBLY do is use the ssw2rest converter that comes in the setools folder. For this you will need your firmwares' ssw file which im pretty sure u'll find at se-nse. I havent tried the rest that it generates, i tried to convert an ssw i got for FAR and it said "cannot convert firmware" i dont know why though. :confused:
The ssw2rest generates correct rest files(I used a lot of times).Quote:
One thing you could POSSIBLY do is use the ssw2rest converter that comes in the setools folder. For this you will need your firmwares' ssw file which im pretty sure u'll find at se-nse. I havent tried the rest that it generates, i tried to convert an ssw i got for FAR and it said "cannot convert firmware" i dont know why though. :confused:
For W810 you need to execute ssw2rest like this: ssw2rest MAIN_firmware 44140000
@ Simox, thats what i did mate!
I used the ssw i got for FAR, which only has the model written on it(like ssw_W550.p3k.49R.ssw).. its said cannot convert firmware though.. are the other ssw in the seetool folder itslef?
Yes, you find it in setool_folder\make_rest\ssw2rest.exe.Quote:
are the other ssw in the seetool folder itslef?
no dude im not talking about the .exe that will convert the ssw to rest, im talking about the original ssw itslef.
And if its supposed to be there it aint there for me!
yeah i tried to get that make rest program to work, but it doesnt come up for me. When i double click something that looks like a command line prompt flashs on the screen and goes away...
abmadman:
In SETool2 Lite the ssw is the mbn(the MAIN firmware), in SEFP ssw is the rest file, so here is the confusion. You need to download the MAIN firmware from somewhere, because SETool2 Lite contains rest files only. By the way SETool2Lite v1.08 doesn't contain that rest file.Quote:
no dude im not talking about the .exe that will convert the ssw to rest, im talking about the original ssw itslef.
And if its supposed to be there it aint there for me!
RUGUNIT:
It works, but first you need to open a command prompt: Start menu->Run... in box you type cmd and press OK. In command prompt type:
cd C:\Users\RUG\Desktop\setool2lite\make_rest\ <press ENTER>
ssw2rest MAIN_firmware_with_path 44140000 <press ENTER>
C:\Users\RUG\Desktop\setool2lite\make_rest\ - path to make_rest folder
where MAIN_firmware_with_path is the MAIN firmware.
ohh okay thanks man, i still gotta find the firmware file tho...
@simox
Oh ok!! no wonder.. will try with my main now! thanks mate!
RUGUNIT and abmadman: I made a mistake in previous post, so before trying to make a rest file check again the corrected post. Sorry for this...
how can i get buckup (SE Tool 2) of my phone?
LMAO simox, chill. Knew it,I've done enough of coding :D