Dead 580i? Please help....

I was flashing my phone and everything went fine but I turned it off and when I turned it on again it won't turn on/charge/connect/do anything!! I tried restoring with SETOOLS2 but it says GDFS doesn't open and I have my backup in my PC so I don't know why it is giving that error. Here is my log file attached and please... I beg you...any one of you....help me out! I am sure I have the backup of the GDFS it's fresh I backed it up today after flashing. I have another one before the flashing. Please help!!!

This is the error it's giving to me: welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.

After upgrading EROM with Wotan and trying to reflash with SETOOLS2 pressing 2 & 5

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/106
MODEL:HB1-06 Gen
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL

ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Z3R0\Desktop1_FS-MAIN-CDA W580_R6BC002_FS_AMERICA_1_RED52\W580_R6BC002_FS_AM ERICA_1_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4180
Will flash 209 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Abort all operations.
Send subblock NAK
Elapsed:146 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Z3R0\Desktop1_FS-MAIN-CDA W580_R6BC002_FS_AMERICA_1_RED52\W580_R6BC002_MAIN_ GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Abort all operations.
Send subblock NAK
Elapsed:139 secs.

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:14 secs.


Please help guys....I really want to save my phone...... Thanks 4 ur time.

Well if you have that GDFS backup from before you tried to flash it, try to restor the GDFS on your phone with that. That would be my guess if your getting a GDFS error. I would wait before you do anything to see what other people say though since I am in no way any type of expert when it comes to these errors. Just seemed to me that it would make sense to revert things to the way they were when they still worked.

Hey thanks for your reply! I tried backing up my GDFS but the phone tells me the same error that the services couldn't be started. Any other suggestions? But thanks though!

Why did you try to solve that problem on your own at all? The phone should be under warranty. Try updating with SEUS. If it fails (what I believe) then bring it back to the place where you've bought it.

xs++3.1 can also read/write gdfs try to restore your gdfs with the back-up,
wotan probley had no effect on your erom cause you were already cid:52 it wouldn't upgrade any more.
try this Upgrading or repairing the EROM (FOTA) in phones CID 49 or CID 51 with Phone XS - Top Sony Forums
then a full flash main fs & custpack

I would but XS++ Doesn't let me do anything when I connect using 2 & 5. and my phone does not want to connect with C button.

Quote:

---

Originally Posted by Spartan123

I would but XS++ Doesn't let me do anything when I connect using 2 & 5. and my phone does not want to connect with C button.

---

ur erom is damaged, connect to setool2 lite holding down 2+5 and press the unlock/repair button

oh if you want use seus it dont work because if your gdfs damage your phone dont recognize
must use from box to repair gdfs by topic (repair gdfs) i sure your phone become true but this topic delete
you must use gdfs repair in setool2

Quote:

---

Originally Posted by number1

ur erom is damaged, connect to setool2 lite holding down 2+5 and press the unlock/repair button

---

Already tried and this is what I get:

Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.


Any other suggestions? Please...I really want to revive my phone

if wotan, xs++ and setool 2 lite have failed with the dcu-60 cable, you will need a service cable to fix your phone.

Quote:

---

Originally Posted by number1

if wotan, xs++ and setool 2 lite have failed with the dcu-60 cable, you will need a service cable to fix your phone.

---

Are you sure there isn't any other way? And which cable should I buy and where can I get it cheap? Thanks!

A couple of months ago, when I killed my phone, doing i dont know what any more(newbie), I started SEtool2 lite, selected my phone model and hit "FLASH" :

-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself ( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

so that's what I did then:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button (without adding any files in any windows), follow instructions, disconnect and..voilá! phone is revived

It worked for me so tell me if it worked for you too!!

Quote:

---

Originally Posted by Spartan123

Are you sure there isn't any other way? And which cable should I buy and where can I get it cheap? Thanks!

---

Quote:

---

Originally Posted by beto_nl

A couple of months ago, when I killed my phone, doing i dont know what any more(newbie), I started SEtool2 lite, selected my phone model and hit "FLASH" :

-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself ( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

so that's what I did then:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button (without adding any files in any windows), follow instructions, disconnect and..voilá! phone is revived

It worked for me so tell me if it worked for you too!!

---

Thanks but sadly it didn't work out for me. Where can I find REST files?

Have you tried to flash the GDFS backup you made before you flashed your phone?

Yes. It hangs up when trying to write the GDFS. It tells me error 29 in SETOOLS2.