w880i error

HI
Can someone explain this error while connecting my 880?

i use multiserver cable.

14:44:50| XS++ v3.1 (Darwin) Ready !
14:44:50| Executed on Microsoft Windows Vista
14:44:56|
14:44:56| Attempting to open the interface...
14:45:00| Baseband ID: 9900
14:45:00| Protocol Version: 3.1
14:45:01| Speed set to 921600
14:45:01|
14:45:01| Sending db2020_cid01_prodid_p3j.bin...
14:45:02| Payload: Failed
14:45:02| Sending PRODUCTION_ID LOADER
14:45:02|
14:45:02| Sending db2020_cid01_prodid_r3a.bin...
14:45:02| Payload: Failed
14:45:02| Activating GDFS...

Xs got stuck on this point.......

btw. setool gives me err: 45 (13)

Looks like w880 isnt supported(but i dont know really).

install the usb flash drivers download and run
4shared.com - online file sharing and storage - download gg-setup.exe

run xs++.exe
take out ur phone battery
press connect
put phone battery back in and plug ur phone into pc holding down C

Quote:

---

Originally Posted by number1

install the usb flash drivers download and run
4shared.com - online file sharing and storage - download gg-setup.exe

run xs++.exe
take out ur phone battery
press connect
put phone battery back in and plug ur phone into pc holding down C

---

dont connect w880 using C, use 2 instead


Another thing to try is to make sure you have the attched loaders for XS++ stored in your XS++ directory (e.g. XS++\loaders).. worked for me :D

the phone can´t be detected via usb.think it´s dead. i use multiserver cable,->error


@jamiegwill: thx but only db2010_2012?? ....doesn´t work for my phone-just tested-..... think w880i is db2020?

Quote:

---

Originally Posted by Hasi

the phone can´t be detected via usb.think it´s dead. i use multiserver cable,->error

---

well try holding 2 + 5 when tyring to connect your w880 and your computer may pick it up.. it should only be completely dead if you have damaged your GDFS

Quote:

---

Originally Posted by jamiegwill

well try holding 2 + 5 when tyring to connect your w880 and your computer may pick it up.. it should only be completely dead if you have damaged your GDFS

---

no response via usb. if the gdfs is damaged the phone should still be "accassable" via multiserver cable. maybe hardware damage?:confused:

Quote:

---

Originally Posted by Hasi

no response via usb. if the gdfs is damaged the phone should still be "accassable" via multiserver cable. maybe hardware damage?:confused:

---

MAYBE, but i wudnt think so.. it could just be that you havent installed the multiserver cable properly or that you dont have the correct flsah drivers for your w880

.. I would uninstall the software etc. for your multiserver cable then restart your computer and reinstall it AND also reinstall the w880 flash drivers

.. I would uninstall the software etc. for your multiserver cable then restart your computer and reinstall it AND also reinstall the w880 flash drivers[/quote]

no success:mad:

have you tried with USB cable and XS++ 3.1??

i tested with both cables and 3.1

Here is how far i managed to get
1. I can only connect (with dcu-60 AND cruiser) when keeping!!!!! 2 pressed during the whole procedure.
oterwise xs++ get stuck while "activating gdfs" and setool gave me err45: (13)----both via cruiser cable
2. SEUS detects the phone but cant identify

3. i managed to get it back to life but i had exteamly weak network connection and after a while(not long) it´l freeze and it s dead again.-I think the phone(or gdfs) messed up itself in some way.

now i think that my gdfs might be damaged. i want to flash another gdfs and write my original security units into it. what do you think??