How To: Share Your Internet Connection Via Bluetooth

You need :

A. Widcomm v5.0.1.2500 drivers -> Widcomm v5.0.1.2500

B. DHCP server -> Dhcpsrv1.5

-----------------------------------------------------------------------------
On Windows Vista

After you install Widcomm bluetooth driver with right click run as administrator copy BTNeighborhood.dll & wbtapi.dll from WIN/system32 and patch them elsewhere after that reboot and enter in safe mod with comand prompt and in the cmd write: del BTNeighborhood.dll & del wbtapi.dll after that open task manager and run explorer.exe then copy your patched BTNeighborhood.dll & wbtapi.dll in WIN/system32, reboot in normal mode and follow all the steps.

Note: Run Widcomm_patcher_v2.exe with right click run as administrator to patch widcomm.
-----------------------------------------------------------------------------

First you need to install Widcomm bluetooth driver and follow the instructions in the Install.txt, then go Advanced Configuration/Local Services/Network Access and select: "Allow other devices to access the Internet/LAN via this computer." After that go to Control panel /Network connections click properties on your default internet connection go to advanced tab and check "Allow other network users to connect through this computer's Internet connection." .And then your Bluetooth Network ip address will be 192.168.0.1.

http://luciannn.evonet.ro/bluetooth/windcomm.jpg


Second you need to configure the DHCP server with:


http://luciannn.evonet.ro/bluetooth/dhcp.jpg


1. Bluetooth Network adapter IP address after ICS (Internet Conection Sharing) with your default internet conection
2. Ip address of the bluetooth network adapter address after ICS (same as 1.)
3. You Phone MAC address http://luciannn.evonet.ro/bluetooth/mac.jpg (capital letters)

4. Ip address for your phone (same class as the bluetooth network adapter)
5. Network adapter for the DHCP server to listen (ip address of the bluetooth network adapter address after ICS) (same as 1.)

Third you need to make a new internet profile on your phone that connects to the bluetooth data account. (Settings/Connectivity/Internet settings/Internet profiles/New profile/Name (any name)/Connect using/your PC bluetooth name. Select this profile as default for Internet profiles and Settings for java .)

Last you need to connect to your computer via phone and ONLY phone from Settings/Connectivity/Bluetooth/My Devices/New device, search for your PC, pair and then click Connect (after you see Connected on your phone and PC your connected to the internet via bluetooth and your bluetooth will not disconnect after you enter and exit a application that needs a internet connection eg: Opera Mini) and every time you want to connect to the internet from your phone if your bluetooth disconnects you have to search and pair you PC from your phone and click Connect.

For this to work you have to use ICS (Internet Conection Sharing) not Bridge Connection !

Works with any phone that can connect to Bluetooth PAN (Personal Area Network), eg: SE W660/K800/K810/W850/W880/etc.

Your done have fun ! :)

Excellent tutorial. Works perfect for k610i.
And it's simpler than using the tutorial where we need to install SE and Java JDK. All we really need is to install the WIDCOMM drivers and software.
PS: There's no real need to use the DHCP server application attached to the post. Just share the internet connection from your computers and then the bluetooth connection is getting the IP.

Thanks !,yes your right but sometimes it doesn't relese the IP for the phone or it takes do long to relese so this where DHCP server is usefull and is your choice if you use it or not.

Is there any method for DSL via usb?

Yes go to Network Connections in Control Panel and click properties on your default dial-up dsl connection go to advanced tab and check Allow other network users to connect through this computer's Internet connection, like in the first step of the tutorial is exactly the same.

i am sorry that i am a little confused on the configure dhcp server part. Which addresses should i fill in the network reg. Should i use my default connection I.P. address ( the one i use to connect to the internet and sharing with my Bluetooth Network ) in 1 and 2 .
3 is the MAC address of my mobile phone ? as 4 is the bluetooth lan IP address. and 5 is also my default connection ip address.
i am using a router, should i point the phone to use my router as defaut gateway intead of my pc. Thank you very much for your time to write this tutorials. Thank you for reading my question and bear with my poor English.

Leave 1,2, 4 & 5 like in the picture. Just change the Phone MAC address.

Yes TheAlphons is right leave 1,2,4,5 like in the picture and change the MAC address (3.) with your phone mac address. If you are using a router then your ip address will be from 192.168.1.2 to 192.168.1.254 and ICS uses 192.168.0.1 so it is ok, no don't use you router as a default gateway because will not work.

i have bluetooth dongle (ivt drivers), i tried to use this drivers but it doesn't recognize my bluetooth.

I tried this on vista but had no luck. Guess this was not written for vista.

The installation was asking me to connect my bluetooth device. I have a built-in bluetooth and my w580i was connected.

Anyway, is there a similar procedure for doing this on a mac.


Thanks

Quote:

---

Originally Posted by danimihalc

i have bluetooth dongle (ivt drivers), i tried to use this drivers but it doesn't recognize my bluetooth.

---

That's because you didn't patch Widcomm ...try that and you will see that it will work.

Quote:

---

Originally Posted by bhagiratha

I tried this on vista but had no luck. Guess this was not written for vista.

The installation was asking me to connect my bluetooth device. I have a built-in bluetooth and my w580i was connected.

Anyway, is there a similar procedure for doing this on a mac.


Thanks

---

It works on vista tested a few days ago but you have to copy BTNeighborhood.dll & wbtapi.dll from WIN/system32 and patch them elsewhere after that enter in safe mod with comand prompt and in the cmd write: del BTNeighborhood.dll & del wbtapi.dll after that open task manager and run explorer.exe then copy your patched BTNeighborhood.dll & wbtapi.dll in WIN/system32, reboot in normal mode and your done ;)

does this method work on a w550i

Works with any phone that can connect to Bluetooth PAN (Personal Area Network), so if you have your pc as a data account in Settings/Connectivity/Data communication/Data accounts on your phone should work :)

Quote:

---

Originally Posted by skypy

Yes TheAlphons is right leave 1,2,4,5 like in the picture and change the MAC address (3.) with your phone mac address. If you are using a router then your ip address will be from 192.168.1.2 to 192.168.1.254 and ICS uses 192.168.0.1 so it is ok, no don't use you router as a default gateway because will not work.

---

Your router's IP address - the 192.168. part is correct mine has default of 192.168.62.1 ; and in the last part of the classC IP address is any from 1 to 254 (0 is reserved for network address, and 255 is also reserved). The IP address of the computer that you are linking through has to be in the same network address as the router. The NETWORK ADDRESS part is defined (hidden) by the mask so a mask of 255.255.255.0 would mean that in my case network address is 192.168.62.0, and last part from 1 to 254 is used by any router, computer, or print server on your network. I don't mean to over complicate just that the '1' in red above is not the only possibility.

how to get pc as a data account

im using dsl

plz help sony ericsson w550i

Quote:

---

Originally Posted by lehnherrba

Your router's IP address - the 192.168. part is correct mine has default of 192.168.62.1 ; and in the last part of the classC IP address is any from 1 to 254 (0 is reserved for network address, and 255 is also reserved). The IP address of the computer that you are linking through has to be in the same network address as the router. The NETWORK ADDRESS part is defined (hidden) by the mask so a mask of 255.255.255.0 would mean that in my case network address is 192.168.62.0, and last part from 1 to 254 is used by any router, computer, or print server on your network. I don't mean to over complicate just that the '1' in red above is not the only possibility.

---

Correct, i remember that my old router had that 1 in the red so thats why i sad its ok and it will work :) Thanks for pointing that out ;)

Quote:

---

Originally Posted by pimpster

how to get pc as a data account

im using dsl

plz help sony ericsson w550i

---

On your phone go to Settings/Connectivity/Bluetooth/My Devices/New device, search for your PC, pair and then click More/Allow Connection/Always allow after this click Connect and in your Data Comunications you will find your PC name as a data account. Before doing this make sure you don't have any active internet profile in your internet settings and your bluetooth dongle works with Widcomm.

If you cant see Connect then try using some services from your bluetooth adaptor like for example dial-up networking from your PC for that account to appear. After doing all of this and still that account doesn't appear then it doesn't work with your phone, in 3 - 4 hours i will test it on that phone and tell you for sure if it works or not .

Later edit: Doesn't work :( i don't know what firmware version it had but doesn't work.

i've seen different tuto on this but no one works for ma w810i

Works with SDK for sure ;) i tested with w800i via bluetooth with widcomm and bluesoleil.

thanks for checking

i got it working with the sdk method

i have a MSI star key, can this be used?

Yes its ok .

Is there any method for DSL via usb?

Yes go to Network Connections in Control Panel and click properties on your default dial-up dsl connection go to advanced tab and check Allow other network users to connect through this computer's Internet connection, like in the first step of the tutorial is exactly the same.

How I can make the settings for the IP-Address in my Phone?

Only if you have symbian if not you can't, thats why i posted that dhcp server.