Problem finalizing K750i@w800 with Far

Hi everyone:

I bought a SEK750i flashed to w700, I flashing it to W800, The MAIN and FS file copied correclty, but, when try to finalize the phone with far, the app hangs on that screen:

http://www.geocities.com/obideo_boy/Finalize.JPG

The phone had a CID36BROWN and I changed to CID36RED without problem.

I used xs++, phonexs and Davinci client 13.7 to finalize the phone, and all freezes on "activating GFDS" or "Start Finalizing" step.

I Reinstall the USB Drivers, and the problem persists

I'm working on that a 1wk a go, and I feel so tired about this, please help me.

PD: sorry for my bad english :(

The application might hang due to insufficient RAM in your computer or your operating system is problamatic so try resolving thes things also.

Quote:

---

Originally Posted by jagadeesh

The application might hang due to insufficient RAM in your computer or your operating system is problamatic so try resolving thes things also.

---

Rubbish.

Try reflashing again.
Use XS++ V1.0.
Later versions are kinda buggy.

New here... can i know how to start far manager wif K750??? i ties b4 but nothing respon...

need ur help.... please...

is it true that i can upgrade my K750 to w800 ?

Quote:

---

Originally Posted by jagadeesh

The application might hang due to insufficient RAM in your computer or your operating system is problamatic so try resolving thes things also.

---

How many RAM I need to perform this operation?

I try in a fresh Windows XP Installation on a Laptop P4 2.8GHZ With 512MB RAM, is that enought?

Thanks

Better to try out in desktop computer with the said configuration.

the configuration is not a problem...

Thanks to All for your responses, I tested in a Desktop PC with the same config (P4 3.0ghz, 1gb RAM, etc etc) and the problem persist, I decide to use a Local repair service center.


I think the problem is like I describe Below:

The SE K750i (CID36BROWN Certificate) Comes with W700 Sofware, maybe the previous owner did not know the W700 firmware is not compatible with K750i CID36, 'cause W700 is CID49


The "flash" can cause damage in FS on K750i

so if i install a patch(which is installing in flash folder)it can cause errors in fs??

how exactly does this damage the FS?

Quote:

---

Originally Posted by jojo_break

is it true that i can upgrade my K750 to w800 ?

---

Yup it is.

Looks in the Tuts.

I do not think it could be a problem. if you get any errors, try reflashing.

i think gflash works very well with CID36 !!
use that to flash to W800 !!

its there in se-nse research area .. check it out

xs++ is the best! it's simple to use!