Printable View
How can i Unlock my Phone? I read a lot here and learned some things, but im not really sure what i have to do. Here is the Data:
Quote:
Originally Posted by SETool2 Lite v1.08
So its a CID49, with R1CA021 prgCXC1250035_EU_2_CL and a DB2010.Quote:
Originally Posted by XS++
Can i unlock this with the USB-cable?
Free you can not unlock this phone
i think
only with Setool dongle or Davinci server or WOTAN server etc,etc
save it to *.vkp file and flash this patch with SETOOL2 lite or FAR.Quote:
;K750 SW-R1CA021
;Remove SIM-Lock
;(c) IronMaster
;(p) jasiek
+44020000
b4594c: 70B5041C24F2B2FB00230022011C1C20 F0B505213A22D1F7AFFE0020F0BDC046
Thank you kavior. So i just make a new file with this next, rename it to .vkp and then i flash it. I am safe when i make a backup with Settol2 lite (Read Flash, Read GDFS) - i mean, can i undo it when i make a mistake?
Only remember, with patch unlock, you will NEVER flash the phone again, if you do any flash on phone your simlock will go back...
BR
if you have a service cable you can use semctool free 8.4 (you apply an compatible main file, you unlock and you restore your original main file, i have done it much time it's ok :) )
No, it doesnt worked. After the patch i tried another SIM, enterd the PIN and then i get a "enter right SIM" from the phone.
This is the Log from setool:
During the Patch i got this Message - I klicked on YES.Quote:
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1CA021_CXC1250035_EU_2_CL
Restore from:R1CA021_CXC1250035_EU_2_CL
Starting to process VKP patch script: G:\Download\_Software\_handy\sony-ericsson\entlock.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44B60000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:117 secs.
http://img230.imageshack.us/img230/6321/wrongmu6.jpg
What was/is wrong?
Can i trie to patch it again?
hey, I think you hav made a mistake,
When it Asks for YES or NO, You hav to click NO. After that the patch wil be applied. If u click YES, then patch wil removed.
i know this step. i clicked NO.
Try to patch Your phone with FAR...
The patch isn't ported properly, so it won't work.Quote:
What was/is wrong?
And you messed-up your MAIN firmware :D. Reflash your phone with MAIN firmware(NO need to reflash the FS or custom pack) and then try a different(hopefully working) patch...Quote:
During the Patch i got this Message - I klicked on YES.
http://img230.imageshack.us/img230/6321/wrongmu6.jpg
Correction:
In the meantime I checked the vkp and it WORKS. So reflash the MAIN firmware and try again...
I think i dont have the MAIN firmware...
Where can i download FAR? Which program as well can i use for patching?
You can USE XS++ or SE Tool lite, their both freeware.
Please do not request firmware from our download area.
try far manager for applying patches and for uploading it to ur phone. quicker way to arrive at ur problem for editing and all.