Printable View
Hi,
I've seen that it is possible to install new java certificate in K750 in order to give permissions to java apps. Halmer.cer and customize_upgrade.xml are uploaded to FS/tpa/preset/custom and that's it. I wonder if the same could be done with K800 CID49 using XS++
Thanks
Yes! Procedure is the same.Quote:
Originally Posted by peca89
Thanks
I still wonder if i have to do the master reset to activate the new certificate.
I think you have to do it if you edit the customize.xml, but i think it is not necessary if you just upload the customize_upgrade.xml. Correct me if I'm wrong!
Cheers
You were not mistaken! After upload of the certificate master reset is not necessary. I made on the z710i CID49 db2020!
Is it possible to do the above with a K800 which has a R1GB001 and CID52 firmware?
no it is notQuote:
Originally Posted by whipermr5
I was wondering if I could install my own certificate into the phone. I happen to have the same configuration as you do. Could you please give specific details about the installation? What is halmer.cer? Can't I just generate my own certificate?
Halmer is the only cert available that lets you sign your own applications to remove prompts.
Well, yes, Halmer is the only certificate available to the average guy.
But I just succeded in creating and installing OWN certificate (that I generated) into the phone. I do not use the Halmer .exe (I run GNU/Linux), I simply sign the .jar files using JadTool from WTK. Yes, I chose the hard way.
The problem with Halmer as someone pointed out elsewhere is that EVERYBODY can sign their code with it, so it may not be safe to have it installed. But nobody can have code signed with my certificate, can they?
Just because you’re paranoid, doesn’t mean they’re not after you ;-)
Can, any one tell me how te access games and application folder due to the fact that it dispalys a message "Operation failed"?
no way to access it, your costumize-files are corrupted. i woudl recommand reflashing.
Back to topic: Have u tried it? Everytime i try it with the customize_upgrade.xml-file my phone only displays "error - call your service provider"
Perhaps i only got the wronf giles. Can someone point me to a "ready-to-go"-halmper-package? :)
Thus, it wrote here instruction for the filling into the telephone of halmer.cst through DavinciFlasher (this must ONLY for the telephones with CID51,52 since PhoneX with this CID[om] it does not be friends thus far):Quote:
Originally Posted by whipermr5
1. We rock DavinciFlasher 18.4
2. We buy da Vinci's ravine for 5$
3. Is discovered DavinciFlasher,
4. We place [galochku] on Advanced, we go in Advanced, we place [galochku] Of customization, we select the file of customize_upgrade_halmer.cst, we harvest ok
5. We harvest Flash, then we connect telephone with the stopped up button “[s]” (on the telephone)
6. We go we smoke, and after arriving, file it will be flooded into the telephone
here [mnzhestvo] of the methods:
For those, constant demands tired to whom on leaving into the Internet or with the turning to the file system Of java - [apletov] it is devoted….
We pour the certificate Of halmer' a through Far Of plugin CID 36/49
1) we draw off customize_upgrade_halmer.rar, we unpack.
2) We start Far Of plugin, we go in FS/tpa/preset/custom/
3) we copy into FS/tpa/preset/custom/of customize_upgrade.xml and halmer.cer
we pour the certificate Of halmer' a through the client of da Vinci
the first, that it is necessary to make, to purchase one Log da Vinci - to here purchase it will be able each, for example, with the aid of WebMoney, it stands 5$.
We draw off the necessary files:
1) Client of da Vinci
2) driver for DCU-60
3)file CST
checking the cable:
1) We install driver for the cable, for this we turn off telephone, then we press button “[s]” on the telephone and, without releasing it, we put cable in the telephone. System will find new equipment, by hand indicate way to the driver in the master of the installation of new devices.
2) Let us test cable with the aid of the client of da Vinci. We start it, harvest ReadCID/TestCable. We press “[s]” on the telephone, put cable.
Attention! During all subsequent actions your computer must be constantly connected to the Internet!
We pour the certificate:
1) We start the client of da Vinci
2) we introduce purchased [login] and password, we place jackdaw opposite Advanced, we harvest to advanced of settings,
3) will appear window, in it we place jackdaw opposite Customization, we indicate way to the [skachannomu] CST- file, harvest [ok].
4) One additional window will appear, in it we place jackdaw opposite both files, we harvest ok, then we harvest large button FLASH, client [rugnetsya], that the basic files of main and fs be sewn will not be, nevertheless we continue, we await…
Writing Of custom Of files…
Uploading of customize_upgrade.xml
Of uploading halmer.cer
Uploated Of successfully!
Execution Of time - 00:02: 43
Done!
5) If below to the left in the client you saw this inscription, then you pierced certificate.
6) We disconnect telephone from the cable, we include telephone.
We sign Java:
1) To [skachat] EQ_Halmer.rar
2) to neglect the file Of eQHalmer.exe, to harvest button A and Enter.
3) To select necessary jar- file, to harvest on it by the right button of mouse and to select the point Of halmer.
4) We pour those obtained of jad & of jar into the telephone into the folder “other”. We search for jad (it usually higher than jar'a and they they are always next located). We harvest “to establish”. After everything was established, we go into the applications of the function of authority and with the large lightening note that reading \ the record of files, the access into the Internet etcetera can be noted as “WITHOUT THE DEMAND”.
Thanks to the author INFerno
hey does anybody know how i can connect my k800 to phoneXS ot XS++ because i was looking for so long and i still cant connect my phone pls help.
My phone is brown what should i do!
PLEASE HELP!
THANKS
KOZAK
BROWN phones are not supported by XS or Phone XS
if you want use XS or phone XS you shoud have a RED certificate
XS++ suports BROWN phones but there is no brown flash files for it. Setool (not cracked) can convert to RED one.
Good luck!
can you give me some proof for that ?Quote:
Originally Posted by kust
XS++ doesn't support brown - only special version of PhoneXS can support it ;)
Yes! Procedure is the same.
lol he ment he has BROWN COLORED phone, not brown firmware lolololQuote:
Originally Posted by OWIES
I am not able to upload the certificate to my phone using XS++. I have W550i CID49
21:00:05| PORT STATUS: ACTIVE
21:00:05| Baseband ID: 8040
21:00:05| Hardware Platform: db2010 Marita compact
21:00:05| Protocol Version: 3.1
21:00:05| AutoReturnCollectingSending loaders\db2010_cid00_prodid_p3k.bin...
21:00:05| This is a PRODUCTION_ID loader
21:00:05| ***** Read flash vendor & id (cmd 0D)
21:00:05| ***** Read otp (cmd 24)
21:00:05| Activating GDFS...
21:00:05| phone name detected
21:00:05| Return
21:00:05| PHONE INFO
21:00:05| DBID: db2010
21:00:05| OTP CID: 49
21:00:05| EROM CID: 49
21:00:05| EROM color: Red
21:00:05| IMEI: 35744400xxxxxx
21:00:05| Phone: W550
21:00:05| Operator: EMEA_6
21:00:05| CDA: CDA102426/106 R2A
21:00:05| Firmware: R4CB020
21:00:05| EROM: n/a
21:00:05|
21:00:05| Ready for operation!
21:04:09| You must choose a way in!Error: FSX failed.
21:04:09| ++ Error: FSX failed
21:04:11| Disconnected... Unplug the phone
21:04:18| Shutting down...
Can anyone help me?
Please somebody tell me. What programs(other than XS++) can I use to upload Java Certioficate to my mobile?
Kompas,Quote:
Originally Posted by kompas
Please tell us how you did it. I have a Knoppix based installation at home but I do not use it much. Would like to know how to sign apps on your own. There is a nice TextReader application which I would like to sign so that it doesnot ask for the read/write permissions every time it browses a folder level.
Thanks,
./RR
Hi Lavdo,Quote:
Originally Posted by Lavdo
Have you solved the problem? What was your CID? Did you use have to use a paid service?
Thanks,
./RR
What's wrong with letting everyone able to sign their own certificates(whats that mean by the way?) As long as you don't lose your phone to someone else, it would be ok, right? Or can people access your phone remotely and hack it?
-Wally
@Wally
Is it possible to remotely hack a SE phone without the user approving access explicitly (like when we need to approve a bluetoooth connection)?
Regards,
Rahul
Try upgrading your phone via SEUS. or do a total reflash.Quote:
Originally Posted by Lavdo
other than that I dont know
why you want to install halmer when you can download your main and patch it with remove java restriction patch. It Easy bro. Once you patch it, you can flash it to your phone and all your java app will act like it is signed. No question for permission again
rahulraj wrote:
I have made my own certificate to. Here are some tutorials:Quote:
Please tell us how you did it. I have a Knoppix based installation at home but I do not use it much. Would like to know how to sign apps on your own. There is a nice TextReader application which I would like to sign so that it doesnot ask for the read/write permissions every time it browses a folder level.
1. HOWTO Build, Sign and Install MIDlets Build and install Singed MIDlet: http://browndrf.blogspot.com/2006/06...ed-midlet.html
(when you generate your certificate, instead of "openssl genrsa -des3 -out ca.key 4096"you need the "openssl genrsa -des3 -out ca.key 2048" command. Upload the certificate as explained in this thread)
2. MIDlet jar signing (a tutorial) Revised David Hayes: http://www.spindriftpages.net/blog/d...orial-revised/
(Written for Nokia phones, but is useful for SE to)
young_sien wrote:
Call me paranoid, but what if you get a java application which sends thousands upon thousands SMS from your phone whitout your knowledge???:DQuote:
why you want to install halmer when you can download your main and patch it with remove java restriction patch
I think that some caution is needed if removing java restriction.Quote:
Originally Posted by young_sien
Where Is It?
Is that work afterall?
i think thats not work