Printable View
HI i'm new italian users.:p
My W600 was WSOD but with SEUS sony update i've fix it !!!!
Now phone start up and when select "start phone" display show the next error advice:
CONFIGURATION ERROR - CONTACT DIALER
what can i do ???
i've read about finalize it but i don't know how and where find the files !!!
HELP ME !!!:(
Finalizing=uploading a custpack to your phone. That needs to be done when you flashed the FS. Just download a custpack and upload it after flashing the FS.
ok but in DOWLOAD , CUSTOM FILES , W600CUSTPACK i found 36 items but non italian custom files !!!!
may i use a generic files??
may i personalize a file and how??
to send it to phone i need to use FAR manager??
excus but i'm a newby so explain as better as possible what can i do !
i have only upgrade W600i with SEUS.
Bye
P.S. I CANNOT UPLOAD FILES BECAUSE I'M NEWBY...MAY YOU HELP ME??
what happened to make it blank out in the first place? cause if you haven't played with it using non-SE programs, then it *could* be somethign wrong with the phone
download FAR manager, and the plugin to make it work with SE phones.
(google for the links.) Then extract a custpack, and upload it to the phone (a generic one, unless you can figure out which was on your phone in the first place)
if you want to personalise it, just change files in the custpack before you upload it to your phone - but i'd stick to what you've got until you get your phone working again.Quote:
may i personalize a file and how??
try to complete phone after flash, or flash CDA with SeTool.
ok ...so i need w600 custpack...I CANNOT UPLOAD FILES BECAUSE I'M NEWBY...where to find it???
x ANT3986: i don't understand your answer!!How can i complete phone??what is CDA and where to find it??I've only upgrade phone with SEUS !!!!
My operator is TIM (italia)...with a generic custpack, phone will works well or i must personalize custpack for my operator ??
inn this case how can i do??
Bye
ok i see u are newb to flashing world...
ok here complete instructions for you !!!!!!!!!!!
you can use any custpack.. here i give w610i cust pack for download..
but that will also work... and don't worry about operator
u will get some Airtel settings.. just delete them.. its an operator in my place..
shall we start ?? ok here we go...
Installation Instructions !!
i assume you are using XS++ 1.6.8 !!
connect phone holding C to XS++ ( i think u know this )
unzip the customization pack
you will find a folder named "tpa" in it
now in xs++ directory on PC, in the directory where u have xs++.exe create a new folder named
"own_custpack"
copy the "tpa" folder into this "own_custpack" folder the path of custom files should be like own_custpack/tpa/preset/custom...
open xs++ and connect fone check only customize file system
now goto settings and select BreakXS ( important )
go back to FLASH
now under phone model select 'Own Custpack'
under CDA and Region, select '/own_custpack'
now hit flash...
now in few seconds custom files will be added to your phone and done
Start your phone !! Wait for some time !!
and yes if u want to enable languages like then u hv to edit customize.xml....
<allowed-language>XY</allowed-language> <<-- This line added
add that line to customize.xml in appropriate place !!!!!
in place of XY put the language u wanted.. example EN for ENGLISH !!
here i give example where to add
but first of all that language must be there in FS...
and u need an cust pack that goes with that FS..
incase u did not get a custpack use this
and add your language line.. by default english is already there..
RapidShare: 1-Click Webhosting
Quote:
QUOTE
<?xml version="1.0" encoding="utf-8"?>
<customization xmlns:scs="http://scs.sonyericsson.net/xsd/CDAGInput.xsd">
<info>
<pcr-created>2007-03-08T16:46:16</pcr-created>
<created-by>Elin Persson</created-by>
<pcr-id>2339</pcr-id>
<pcr-revision>8</pcr-revision>
<cda-number>CDA102568/207</cda-number>
<cda-revision>R2A</cda-revision>
<model>HB1-06 Gen</model>
<country>Sweden</country>
<operator>Sony Ericsson</operator>
<language-variant-name>CENT_EUROPE</language-variant-name>
<allowed-language>en</allowed-language>
<allowed-language>pl</allowed-language>
<allowed-language>cs</allowed-language>
<allowed-language>sk</allowed-language>
<allowed-language>hu</allowed-language>[u]
<allowed-language>XY</allowed-language> <<-- This line added for XY langauge..
</info>
<clock>
<date>2007-03-08</date>
</clock>
<media>
<image deletable="true" lock="false" unicode-name="Lensplay.png">Picture_Sony Ericsson_6023.1.png</image>
<theme deletable="true" lock="false" unicode-name="VanillaGlow.thm">Theme_Sony Ericsson_6024.1.thm</theme>
</media>
<wap>
<bookmark name="Sony Ericsson">http://wap.sonyericsson.com</bookmark>
<bookmark name="Google Search">http://wap.sonyericsson.com/download/download.do?cmd=bm&appl=searchengine</bookmark>
</wap>
<mmi>
<profile id="0">
</profile>
<settings>
<default-theme>VanillaGlow.thm</default-theme>
</settings>
</mmi>
<use-old-cust>false</use-old-cust>
</customization>
thank you for your patience:p....how can edit customize.xml ??
if i dezip it, starts internet browser and show me the code line....but no change allowed !!!!
after insert italian code, i need fs with italian language...right ??
do you know where to find it??
Bye:o
your custpack it's for W580....it will be good for my W600i ???
Bye
Press shift and rightclick the file. Choose "open with" and then pick the editor.
Or rename it to customize.txt, modify it and rename it to customize.txt afterwards.
i've just complet my W600i with XS++.....BUT:
after 1 minutes from FLASH command, windows show me new peripherical found and show me "how to open " panel...so i can navigate trought various file in the phone.
and thats'all....after some minutes nothing happen and i've stopping XS++.
switch on the phone , the same problem "configuration error" :confused:
i show you log file....HELP ME :eek:
21:16:23| XS++ v1.6.8 Beta Ready !
21:16:23| Executed on Microsoft Windows XP
21:16:31| Attempting to open the interface...
21:16:31|
21:16:31| Turn off phone
21:16:31| Hold 'C' button on phone and connect phone.
21:16:31| You have 30 seconds.
21:16:31|
21:16:38| Baseband ID: 8040
21:16:38| Hardware Platform: db2010 Marita compact
21:16:38| Protocol Version: 3.1
21:16:38| Sending loaders\db2010_cid00_prodid_p3l.bin...
21:16:38| This is a PRODUCTION_ID loader
21:16:38| ***** Read flash vendor & id (cmd 0D)
21:16:38| ***** Read otp (cmd 24)
21:16:38| Activating GDFS...
21:16:38| Phone name detected!
21:16:38|
21:16:38| Profiling SEMC phone...
21:16:38| Baseband ID: db2010
21:16:38| OTP CID: 49
21:16:38| EROM CID: 49
21:16:38| EROM Color: Red
21:16:38| IMEI: 35744500xxxxxx
21:16:38| Phone ID: W600
21:16:38| Network: TIM_ITALY
21:16:38| CDA: PCR-ID: 31673 RA13
21:16:38| Firmware Version: R7CA017
21:16:38| EROM: n/a
21:16:38|
21:16:38| Ready for operation!
21:17:10| +++ Sending CS_LOADER...
21:17:10| Sending loaders\db2010_cid49red_cs_r3l.bin...
21:17:12| This is a CHIPSELECT loader
21:17:12| Activating loader...
21:17:12| Activating GDFS...
21:17:13| Checking if loader is unlocked...
21:17:13| This loader is LOCKED (errorcode=30)
21:17:13| ***** Auth startup (cmd 05-50)
21:17:13| ***** AuthA (cmd 05-42) hacking
21:17:28| Try #1000 and counting...
21:17:42| Try #2000 and counting...
21:17:57| Try #3000 and counting...
21:18:11| Try #4000 and counting...
21:18:14| ...4201
21:18:14| Matches: 0:0003918, 1:000281, 2:0002, 3:0
21:18:14| Totals : 0:0003918, 1:000281, 2:0002, 3:0
21:18:14| Theory : 0:0003938, 1:000261, 2:0001, 3:0
21:18:14| ***** Reset (cmd 01-0C)
21:18:14| Waiting for the phone to disconnect
21:18:14| Waiting for the phone to reconnect
21:26:17| ++ Error: Flashing failed
21:26:17| Disconnected... Unplug the phone
21:26:18| Shutting down...
you can try to installed the newest usbflash driver called ggsemc.dll or something. You can search this on the forum
hope this help you:):)
Try XS++ 2.2. The older versions had problem with flashing W550. The W600 is very similar.
i hade the same problem with my phone.first i didn't put the finish file and when i started the phone it said: Configuration error.contact service provider.The second time i did that and it workes.I must say my firmware is generic.Now i'm trying to find the original firmware,i don't realy like this firmware.Good luck!Quote:
Originally Posted by attaia
P.S. Sorry my english
I flashed my W600i with setool2lite. XS++ (I think 2.0) did not work for me. It flashed Main without any problem, but it always stopped on I think 114 block in FS. So I switched to SEtool2lite and everything was perfect.
@gunhead: that's the procedure you had to go through before XS++ 2.2. The bug is fixed now.
with your patience i have fixed all my W600i WSOD problem....with SEUS i have fixed white display problem and with XS++2.2 i have fixed "configuration error" !!!!!
I love you !!!!!:D:D:D:D:D:D:D:D:D:D:D:D:D:D
You must use customization pack according to your main and FS files.
Otherwise it wont work (as you may notice)
EDIT: lol, didn't see you fixed it. :D
Hey I am trying this tutorial... but, I cannot upload the custpack correctly, The main ans FS are flashed without error. I am using the file W600_R7CA017_MAIN_NAM_1_RED49.mbn as Main and W600_R7CA017_FS_LAM_1_RED49.fbm as FS, and the dloaded custpack from here. Once the main an FS are done, the custpack flashing freezes at "Activating filesystem... " Please help... urgent!!!Quote:
Originally Posted by superskipp
:rolleyes:samething happened to me and i got the same logs. we need to try setool.
21:16:23| XS++ v1.6.8 Beta Ready !
21:16:23| Executed on Microsoft Windows XP
21:16:31| Attempting to open the interface...
21:16:31|
21:16:31| Turn off phone
21:16:31| Hold 'C' button on phone and connect phone.
21:16:31| You have 30 seconds.
21:16:31|
21:16:38| Baseband ID: 8040
21:16:38| Hardware Platform: db2010 Marita compact
21:16:38| Protocol Version: 3.1
21:16:38| Sending loaders\db2010_cid00_prodid_p3l.bin...
21:16:38| This is a PRODUCTION_ID loader
21:16:38| ***** Read flash vendor & id (cmd 0D)
21:16:38| ***** Read otp (cmd 24)
21:16:38| Activating GDFS...
21:16:38| Phone name detected!
21:16:38|
21:16:38| Profiling SEMC phone...
21:16:38| Baseband ID: db2010
21:16:38| OTP CID: 49
21:16:38| EROM CID: 49
21:16:38| EROM Color: Red
21:16:38| IMEI: 35744500xxxxxx
21:16:38| Phone ID: W600
21:16:38| Network: TIM_ITALY
21:16:38| CDA: PCR-ID: 31673 RA13
21:16:38| Firmware Version: R7CA017
21:16:38| EROM: n/a
21:16:38|
21:16:38| Ready for operation!
21:17:10| +++ Sending CS_LOADER...
21:17:10| Sending loaders\db2010_cid49red_cs_r3l.bin...
21:17:12| This is a CHIPSELECT loader
21:17:12| Activating loader...
21:17:12| Activating GDFS...
21:17:13| Checking if loader is unlocked...
21:17:13| This loader is LOCKED (errorcode=30)
21:17:13| ***** Auth startup (cmd 05-50)
21:17:13| ***** AuthA (cmd 05-42) hacking
21:17:28| Try #1000 and counting...
21:17:42| Try #2000 and counting...
21:17:57| Try #3000 and counting...
21:18:11| Try #4000 and counting...
21:18:14| ...4201
21:18:14| Matches: 0:0003918, 1:000281, 2:0002, 3:0
21:18:14| Totals : 0:0003918, 1:000281, 2:0002, 3:0
21:18:14| Theory : 0:0003938, 1:000261, 2:0001, 3:0
21:18:14| ***** Reset (cmd 01-0C)
21:18:14| Waiting for the phone to disconnect
21:18:14| Waiting for the phone to reconnect
21:26:17| ++ Error: Flashing failed
21:26:17| Disconnected... Unplug the phone
21:26:18| Shutting down...[/QUOTE]
after this nothing happens.
Try a higher ver.of XS++ (but not the newest >its buggy at the moment(4ME))
and which file extension have ur files u want to flash?
before flashing backup gdfs, and keep it in safe file, then go to flash fs and cust pack of your region you will find in top sony download area.
OK. The guys from TOPSONY have written the tutorials for flashing and other staff. Why no one didn't read them??? Here are links for the tutorials - SE Tools video tutorial and XS++ 2.x flashing guide