plz tell me how to convert erom from brown to red for w850i cid 49/51/52 using setool2
is there any tutorial ?
Printable View
plz tell me how to convert erom from brown to red for w850i cid 49/51/52 using setool2
is there any tutorial ?
I do:
flash MAIN and FS with on the finish CID RED
FAQ from the_laser:
"DB2020 procedure:
(Not mandatory, but necessary to service the phone through SERVER)
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
switch to SEMC tab, select correct model and select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is RED and ready to flash using credits system.
It has been confirmed that the K610 conversion EROM works for the Z610 as well. It might also work for the W850/W710."
BR
(I'm not shure if it works in lite version)
Gump
this cant be done in setool lite 2 , setool lit 2 user's just can flash fones with diffrent cid for free of cost , can not change brown to red or unlock or etc ...
so dont test it with setool 2 lit
Regards ,
how to do it? please tell properly...
Use English Language only and don’t spam forum Space read form rolls CarefullyQuote:
Originally Posted by esmail-mob
Best regards,
esmail-mob talk only in english or you will be banned. dont spam please...
how to convert erom from red to brown CID 49 for K310i and k510i
Br.
It is impossible.
Any other way to repair the phone with this errorQuote:
Originally Posted by paladinzluka
v0.91380096/UNI
Card serial:000xxx10
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO VALID FLASH CID DETECTED (00)
skipping empty loader...
Can't load id loader !
Elapsed:7 secs.
Br.
Please if there are any way to repair this phone so please tell me its very urgentQuote:
Originally Posted by paladinzluka
Thank you, very much
where can i download setool 2 since i can't convert from red to brown using setool 2 lite? thanks
SE Tool 2 is hardware protected and therefore it's useless to download it.
There's a cracked version available in the download area but it only works with old phones (K750/W800, W550, K600 for example).
so there isn't a way for me to convert my w810i cid49 brown to a cid49 red so that i can flash it?
why change it?
bc i got the white screen of death and i don't know where to get brown firmware to flash it with. if i convert it to red then all i'll need to do is to flash red firmware
You can get brown firmware here:
Downloads - W810 - Top Sony Developers
But you'll have to pay 25€ (you'll get access for one month with 100MB each day).
WOW. thanks! now i just need to get some money lol but i still want to convert my phone to red
Like I said in the other thread: SEMCTool 8.4 should be able to do the job.
But I'm not sure about the procedure so you should really be 100% sure about what you're doing. It would be a pity if you brick your phone.
hi use these tools to do what you want.semc tool usbsmart v8.4 cracked or setool2 lite v1.11.search setool lite v1.11 and after download it open it and choose k610.k618. press identify and after 3 sec. stop it and choose w810 "recovery" tabb is displayed and do not be late press recovery and wait to finish then full flash it.read gdfs in bin format before you do anything.
Force the firmware upgrade from SEUS. Maybe this will convert your phone from brown to red, because in some other cases did this work.Quote:
Originally Posted by figurine
Nice day