hi, now i know but its too late. I need solution how to bring it back to life without loosing memory, txt's etc. If no other option will flash. XS++ and setool recognize the phone.
db2020, R1JC002 (central europe), cid51 red
thanks
Printable View
hi, now i know but its too late. I need solution how to bring it back to life without loosing memory, txt's etc. If no other option will flash. XS++ and setool recognize the phone.
db2020, R1JC002 (central europe), cid51 red
thanks
try to flash with cid 49 brown first. then flash again with cid 53 via setool. tick signed phone and customize phone
Just reflash main. You won't lose anything.Quote:
Originally Posted by marekpc
What the f?!Quote:
Originally Posted by suryajaya
No good. Chenged cid 51 to 52 to use patch method (xs++). Flashed with cid 52 soft - phone is working now BUT....as i expected its got simlock back. Wanted to apply patch i made but cant connect to setool or xs++.
When i try to connect with 'c' pressed i switch on the phone to normal mode and i got message:
' phone pre-boot failed, possible RECOVERY needed '.
What to do now?
Don't switch on the phone,it must be OFF.Remove battery for 5-10 seconds then insert it back and follow instructions.Quote:
Originally Posted by marekpc
phone is off when im connecting to setool. It doesnt go into pre-boot mode - when i try to conect it switches on to normal mode
Clean usb connector with needle(golden contacts)on your phone and try again.If same then probably pins inside the phones are broken and need to resolder or replace connector.Quote:
Originally Posted by marekpc
try upgrade with seus, or download both FW and CDA, then just flash it, naturally, phone loses everything once stored in the phone.
Please read posts carefuly.His phone can't be detected so it is not possible to upgrade/flash that phone with any software including SEUS untill he solve that problem.Quote:
Originally Posted by nobitalt
i guess the keypad 'C' button is not working at all