K810i CID 49 Brown to CID 52
Hello Friends,
Recently i used D-Ultimate unlocker to repair my erom and downgrade my CID from 53.
Now the CID is Brown 49.
When i connect to XS++ it asks me whether to upgrade my CID.When i Select yes i get the following error
Ready for operation!
06:15:18| +++ Sending CERTIFICATE LOADER...
06:15:18|
06:15:19| Sending db2020_cid01_cert_p3g.bin...
06:15:19| Payload: Failed
06:15:19|
06:15:19| Sending db2020_red49_cs_r3a009.bin...
06:15:19| Prologue: Failed
06:15:19| Error: Failed to send CSLoader!
06:15:19| FSX Shutdown!
Please tell me how to upgrade my CID to 52 Red. Thanks!:a013
Re: K810i CID 49 Brown to CID 52
use D-Ultimate Unlock to do that too
Re: K810i CID 49 Brown to CID 52
I cant D-Ultimate Unlocker Cannot Connect to the phone. I get an error
Re: K810i CID 49 Brown to CID 52
post log from D-ultimate unlocker
Re: K810i CID 49 Brown to CID 52
Code:
14:28:24 D-Ultimate Unlocker v5.04 by Cruiser Team
14:28:24 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
14:28:24 Initializing...
! 14:28:24 1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 14:28:24 2. Choose the phone model
! 14:28:24 3. Select the desired options
! 14:28:24 4. Please connect the phone either via USB while holding 2-5…
! 14:28:24 - or via a serial cable and double-click on it in the device list
14:28:44 Selected phone: K810
14:28:44 Connecting via SEMC USB Flash Device (USB1)…
14:28:44 Device driver version: 2.2.0.5
14:28:44 Device driver date: 5-4-2010
14:28:44 Connecting to the baseband CPU...
14:28:44 Entering baseband CPU service mode...
14:28:45 Detected chipset: DB2020
14:28:45 Boot mode: EROM
14:28:45 EROM version: R3A022 prgCXC1250616_EROM_DB2020_HB106GENERIC_FOTA_FLAFLA_SIBLEY_SEMCUSB
E 14:28:45 Error: 0x889C690F
E 14:28:45 Error: 0xF984FBBB
E 14:28:45 Error data: 0xF984FBBB - 00000004:E3030000
E 14:28:45 Unsupported boot mode
! 14:28:45 Please boot via ROM
E 14:28:45 Failed!
! 14:28:45 To report errors right-click this window
Help pls!
Re: K810i CID 49 Brown to CID 52
you need to connect the phone while holding 2 and 5 button at a time while connecting the USB. if you still have credits, then it will work just fine
Re: K810i CID 49 Brown to CID 52
I am holding the 2 and 5 buttons but still getting this error. Tried it several times
Re: K810i CID 49 Brown to CID 52
is your phone keypad working well? did you try holding 'C' button as well?
Re: K810i CID 49 Brown to CID 52
Yes bro Keypad is working fine..even tried wid 'C' Button.Got the Same error. If i try with Cruiser Unlocker i'm not even getting that Error.Phone is not being Detected at all!
Re: K810i CID 49 Brown to CID 52
Hi,try to clean usb connector on the phone with a needle,try to change usb port on your pc and don't use usb hub if you have one.If that not help try to identify with omnius.Post result.
Re: K810i CID 49 Brown to CID 52
satch1234 might be right about you, try using different usb port or back usb port of the PC, clean the fastport contact point, use fully charged batteries and please try again
