Printable View
OKAY I have had this phone for ages & I like it, now the only thing is that it no longer turns on yes I messed it up, I corrupted the software on it, and I tried Sony Ericsson PC suite but that also did not work to recover it. Can someone get me links to the right files for a restore & after I need to unlock it to all networks otherwise it wont work either. Please help thanks
For U.K. must use these files:
EROM CID52:
1. K800_R8BF003_MAIN_GENERIC_WI_RED52
2. K800_R8BF003_FS_EUROPE_4_RED52
3. HB1-06_Generic_CDA102568_13_R4A_GENERIC_EUROPE_4
EROM CID53:
1. K800_R8BF003_MAIN_GENERIC_WI_RED53
2. K800_R8BF003_FS_EUROPE_3_RED53
3. HB1-06_Generic_CDA102568_12_R4A_GENERIC_EUROPE_3
Full unlock (not patch unlock) with Omnius - it's free.
Thanks for the reply. First I don't know where the HB1 file is & second the phone is not being detected my XS++ Just note that I think there is totally no software at all on this phone, could it be totally dead/unrepairable?
Hi,
Have a look on Omnius, it's free.
You must have installed SEMC USB flash driver -> install SEUS and SEMC USB flash driver will be installed automaticaly.Quote:
Originally Posted by itisfalse
When connect to XS++ v3.1 hold 2 and 5 together instead "C" button and put USB cable.
HB1-06_Generic_CDA102568_12_R4A_GENERIC_EUROPE_3 can find here: Downloads -> Custom Files -> k800custpack
HI I am using Omnius & I have installed the drivers but I get this error:
Code:Action journal
15:02:41 Flash
15:02:41 Allows to change languages supported by the phone and upgrade its firmware.
15:02:41 Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
15:02:41 Application version: 0.07.2279 (beta)
15:02:41 . The action name is 'Flash'
15:02:41 Selected phone type: K800
15:02:41 Selected connection method: USB EROM
15:02:41 i Instructions
15:02:41 i 1. Make sure the phone battery is charged to at least 50%.
15:02:41 i 2. Switch off the phone!
15:02:41 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
15:02:41 i 4. Press and hold the button C, then connect the cable to the phone!
15:02:41 . The action started waiting for the user
15:02:54 . The action finished waiting for the user
15:02:54 Connecting via SEMC USB Flash Device (USB1)...
15:02:54 Device driver version: 2.2.0.5
15:02:54 Entering baseband CPU service mode...
15:02:54 Detected chipset: DB2020 '9900
15:02:55 Boot mode: EROM
15:02:55 Sending loader...
15:02:55 Flash chip manufacturer: Intel®
15:02:55 Flash chip ID: 897E
15:02:55 IMEI: 3***********
15:02:55 OTP CID: 51
15:02:55 OTP area status: Locked
15:02:55 Product type: Retail
15:02:55 Effective CID: 52
15:02:55 Effective color: Red
15:02:55 e Check server settings or smartcard presence.
15:02:55 e Failed!
15:02:55 . The action entered shutdown phase
15:02:55 . The action reported failure
Error code
# 1EF560D3A4F13432
Error details
---
4A D1 CD 5D 80 DA 88 57 B2 89 A4 3A F6 CF 00 C8
5D C0 32 EC BE 4B 78 53 35 E3 E5 26 D4 5C 10 4F
76 BF 74 43 4E 7B 98 09 D2 19 D2 38 16 6D 20 91
E6 80 7C 92 22 55 50 A0 30 BB 8C BB 5A 33 D0 11
AA AB 3D 3D 22 E6
---
Why you forget this:Quote:
Originally Posted by itisfalse
http://img809.imageshack.us/img809/329/3008e8659696.jpg
I did do that it gave me error 1384990846C5D57A
by the way am I supposed to pay for this it says supreme credit server then says actual credit 0.00
You must activate your account from email or if you haven't this email -> resend activation from here: http://www.cruiserlog.net/Quote:
Originally Posted by itisfalse
Omnius is free for unlock!!!
http://www.omnius-server.com/sites/d...t_bottom_0.png
OK I done that but then something terribly went wrong the CID is now showing 49 and color Brown what do I do please?
Edit>>
This is the error:
Remember I need to flash my phone first I cant even turn it on!Code:17:22:57| TURN OFF PHONE!
17:22:57| Hold 'C' button on phone and connect phone NOW.
17:22:57| You have 30 seconds...
17:22:57|
17:22:58| Baseband ID: 9900
17:22:58| Protocol Version: 3.1
17:22:58| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)
17:22:58| ...using GDFS name
17:22:58|
17:22:58| Profiling SEMC phone...
17:22:58| Platform: DB2020
17:22:58| OTP CID: 51
17:22:58| EROM CID: 49
17:22:58| EROM Color: Brown
17:22:58| IMEI: 35908801xxxxxx
17:22:58| Phone ID: K800
17:22:58| Region: EUROPE_1
17:22:58| CDA: CDA102568/10 R8A
17:22:58| Firmware Version: R8BF003
17:22:58| EROM: R3A022
17:22:58| Ready for operation!
17:23:02| +++ Sending CERTIFICATE LOADER...
17:23:02|
17:23:02| Sending db2020_cid01_cert_p3g.bin...
17:23:02| Payload: Failed
17:23:02|
17:23:02| Sending db2020_red49_cs_r3a009.bin...
17:23:02| Prologue: Failed
17:23:02| Error: Failed to send CSLoader!
Quote:
Originally Posted by itisfalse
Make this:
http://img408.imageshack.us/img408/5200/43011645.jpg
http://img13.imageshack.us/img13/5869/68015543.jpg
Follow the instructions!
Can't do that either get this error:Quote:
Originally Posted by senter
Code:Action journal
22:51:47 Unlock network lock by reset
22:51:47 Unlocks the phone network lock by reset (up to OTP CID 53).
22:51:47 Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 32-bit
22:51:48 Application version: 0.07.2279 (beta)
22:51:48 . The action name is 'Unlock'
22:51:48 Selected phone type: K800
22:51:48 Selected connection method: USB ROM
22:51:48 i Instructions
22:51:48 i 1. Make sure the phone battery is charged to at least 50%.
22:51:48 i 2. Switch off the phone!
22:51:48 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:51:48 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:51:48 . The action started waiting for the user
22:52:24 . The action finished waiting for the user
22:52:24 Connecting via Generic EMP USB Flash Device (USB1)...
22:52:24 Device driver version: 2.2.0.5
22:52:24 Entering baseband CPU service mode...
22:52:24 Detected chipset: DB2020 '9900
22:52:24 Boot mode: ROM
22:52:24 Sending loader...
22:52:25 Flash chip manufacturer: Intel®
22:52:25 Flash chip ID: 897E
22:52:25 IMEI: 3590*********
22:52:25 OTP CID: 51
22:52:25 OTP area status: Locked
22:52:25 Product type: Retail
22:52:25 Effective CID: 49
22:52:25 Effective color: Brown
22:52:25 Restarting the phone...
22:52:27 i Instructions
22:52:27 i 1. Make sure the phone battery is charged to at least 50%.
22:52:27 i 2. Switch off the phone!
22:52:27 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:52:27 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
22:53:11 Connecting via Generic EMP USB Flash Device (USB1)...
22:53:11 Device driver version: 2.2.0.5
22:53:11 Entering baseband CPU service mode...
22:53:11 Detected chipset: DB2020 '9900
22:53:11 Boot mode: ROM
22:53:11 Sending loader...
22:53:14 e Failed!
22:53:14 . The action entered shutdown phase
22:53:14 . The action reported failure
Error code
# 509FA839F85EF036
Error details
---
67 C2 53 B3 2E BE 7A 9F 1C 7D 3E DD 08 12 C2 C7
2F 83 A8 02 90 31 0A C5 1C F9 3E E9 B6 68 AE 67
FC 1F 7C 3E 1F 75 C8 3E 04 13 5E DB 28 39 1E 69
F4 3B 26 43 1E 3C 2A 2F EC 6D 12 A4 C8 17 72 39
14 6C E4 21 C0 BF 46 AF DC B3 7E 8F 52 19 38 B2
---
Do you read the instruction of the program?Quote:
Originally Posted by itisfalse
Remove the phone battery and wait at least 5 seconds before reinserting it!
Press and hold buttons 2 and 5, then connect the cable to the phone!
Yes I followed all the instructions it still gives that error.Quote:
Originally Posted by senter
OK I tried using it on XS++ & that did not do it either gave this error:
Code:11:48:19| Baseband ID: 9900
11:48:19| Protocol Version: 3.1
11:48:19| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)
11:48:19| ...using GDFS name
11:48:19|
11:48:19| Profiling SEMC phone...
11:48:19| Platform: DB2020
11:48:19| OTP CID: 51
11:48:19| EROM CID: 49
11:48:19| EROM Color: Brown
11:48:19| IMEI: 35908801xxxxxx
11:48:19| Phone ID: K800
11:48:19| Region: EUROPE_1
11:48:19| CDA: CDA102568/10 R8A
11:48:19| Firmware Version: R8BF003
11:48:19| EROM: R3A022
11:48:19| Ready for operation!
11:48:23| +++ Sending CERTIFICATE LOADER...
11:48:23|
11:48:23| Sending db2020_cid01_cert_p3g.bin...
11:48:23| Payload: Failed
11:48:23|
11:48:23| Sending db2020_red49_cs_r3a009.bin...
11:48:23| Prologue: Failed
11:48:23| Error: Failed to send CSLoader!
11:48:23| FSX Shutdown!
11:48:25| Disconnected... Unplug the phone
do you backup your gdfs for you phone?
No, why should I?
OK I checked the phone & everything & it says "Error: GDFS configuration not found."
Clean phone connector with wooden toothpick. For you may be is funny, but this method works fine.Quote:
Originally Posted by itisfalse
it still does not work is there anyway to flash the CID 49 & make this phone turn on at least then, upgrade to 52 then Flash?
Try update via SEUS.Quote:
Originally Posted by itisfalse
yeah I tried that, that was the first thing I did when I had this problem never helped.....even now, what do you think phone completely gone?Quote:
Originally Posted by senter
Edit sorry I thought you meant the PC suite, anyway I tried the update but "the phone is already up to date"
Quote:
Originally Posted by Bastyan1990
Hi sorry for making you post but it is OK now, I crushed my phone, I will get a new one soon Thanks thought
to meke ur computer recoginize ur dead phone u have to have installed the smc usb drivers 1st before doing anything else.
after that i recommend using xs++ with ur main firmware and fs files.u can get them from the download section of this forum
Thanks for all the advice, just working out how to get one of these Omnius licences.
maybe you wrong on flashing