Printable View
just got the uc-10 cruiser cable today...
now which is the best program for flashing the k750i? Also, how do I determine which set of files I need for my particular k750i? I'm in the U.S., so I need an english set..
Also, I can't connect my phone thru xs++ using the 'hold c' method...its not recognized...the phone is totally bricked and has been for a couple years.... so the battery is probably completely dead.. how will I even connect to ANY program?
You need a charged battery in order to identify your phone in Setool2Lite:
http://www.topsony.com/forum/upgrade...log-t8314.html
ok i took the battery to an at&t store and they charged it for me.... but now I still can't do the steps u listed to identify my phone. The phone is bricked! What should I do first?
Try to connect with "2 + 5" instead "C".
that doesn't work....still no response whatsoever from the phone..Quote:
Originally Posted by hyperion17
Which program is even capable of powering up my totally bricked phone?
EDIT: I used SEMC Tool 8.4 "recover certificate" in the flash ARM menu.. and it said it was successful, but I have no idea what this means or what I should do next to proceed with a full flash..
Using setool2lite, I can use the 'identify' function AND the 'unlock/repair' function but the phone still won't power up at all. What else do I need to flash to make it alive again?
here's the reports:
after clicking 'identify'
http://i139.photobucket.com/albums/q...eridentify.jpg
after clicking 'unlock'repair'
http://i139.photobucket.com/albums/q...lockrepair.jpg
mate go to settings and check complete phone after flash
and add this two file
Top Sony - All about Sony Ericsson mobile phones. Free Firmware Download - Unlock - Upgrade - Debrand
Top Sony - All about Sony Ericsson mobile phones. Free Firmware Download - Unlock - Upgrade - Debrand
and tick flash
i don't see where to click 'finalize phone' or even where the settings menu is... but i got this error when trying to flash those 2 files you supplied me..
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.
i think your gdfs file is corrupted and cannot flash to that free software you.,. only authorize technician will do that problem.,. i can do that but im here in phillipines i can do that because i have the tools and i have activated setool3
aren't there free programs that can flash the gdfs?
After many failed attempts at flashing this phone, I tried omnius and the program actually put life into my k750i when I used the unlock command! I guess this command repaired whatever else my phone needed in order for it to boot.
But now the problem is that the phone is stuck on the 'please wait' screen and I have no idea how to fix it. The phone was converted to cid51 during the unlock process, so how can I flash firmware to match cid51 when there is no firmware for k750i cid51??
Also, the flash option is totally grayed out and un-selectable. What can I do?? Need this phone working!!
Code:Action journal
22:25:06 Identify
22:25:06 Shows detailed information about the connected phone.
22:25:06 Operating system: Microsoft Windows XP Home Edition Service Pack 3 (build 2600)
22:25:06 Application version: 0.07.2279 (beta)
22:25:06 . The action name is 'Identification'
22:25:06 Selected phone type: K750
22:25:06 Selected connection method: UART ROM
22:25:06 i Instructions
22:25:06 i 1. Make sure the phone battery is charged to at least 50%.
22:25:06 i 2. Switch off the phone!
22:25:06 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:25:06 i 4. Connect the cable to the phone, then click Activate next to the cable icon!
22:25:06 . The action started waiting for the user
22:25:06 . The action finished waiting for the user
22:25:06 Connecting via Cruiser UC-10 Cable (COM12)...
22:25:07 Device driver version: 1.0.2176.0
22:25:18 Entering baseband CPU service mode...
22:25:18 Detected chipset: DB2010 '8040
22:25:18 Boot mode: ROM
22:25:19 Sending loader...
22:25:19 Flash chip manufacturer: STMicroelectronics
22:25:20 Flash chip ID: 200D
22:25:20 IMEI: xxxxxxxxxxxx
22:25:20 OTP CID: 36
22:25:20 OTP area status: Locked
22:25:20 Product type: Retail
22:25:20 Effective CID: 51
22:25:20 Effective color: Brown
22:25:20 Initializing GDFS access...
22:25:20 Reading from GDFS...
22:25:20 Phone type: K750i
22:25:20 Phone branding: Unknown
22:25:20 MAPP CXC article: R1BC002 prgCXC125952_EU_1_CL
22:25:20 MAPP CXC version: R1BC002
22:25:20 CDA article: Unknown
22:25:21 CDA version: Unknown
22:25:21 Default article: Unknown
22:25:21 Default version: Unknown
22:25:21 Language package: Unknown
22:25:21 The phone is not locked to a network.
22:25:21 Turning off the phone...
22:25:21 i Please disconnect battery and cable from the phone!
22:25:22 s Successfully done.
22:25:22 . The action entered shutdown phase
22:25:22 . The action reported success
Additional details
---
62 39 E2 0C 93 0F 05 18 77 5C 99 FC EB 96 13 60
E1 66 51 51 13 5E 2B 26 39 1F 97 0C 3B DA 4B B7
C1 86 2F EC 9D E0 5B C8 E9 76 63 8B 1E 58
---
convert CID back to CID49 RED (though it was CID36) and try flashing again