OK this phone is out now. Has anyone pulled off the CDA info yet? If so could you post the info?
Thanks
Printable View
OK this phone is out now. Has anyone pulled off the CDA info yet? If so could you post the info?
Thanks
I've got this info from the identify in a2explorer, trying to figure out how to pull the actual file off since the phone is cid53, though..
ChipID:E800,EMP protocol:0401
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:53 PAF:1 IMEI:**** CERT:RED
LDR:2009-04-21 18:29 1202-0421_DB3210_CS_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:30 1202-0420_DB3210_CS_LOADER_APP_SDRAM_R2A081
Model:C905a
MAPP CXC article: R1BB026 prg1208-0520_ATT_SI
MAPP CXC version: R1BB026
Language Package:ATT
CDA article: 1214-8735
CDA version: R36A
Default article: 1205-9083
Default version: R1BB026
Network LOCKED
Operator: MULTIPLE
Elapsed:14 secs.
Will you try this for me too please?
right, *, left, left,*, Left, *
then Service Info - Software Info - then scroll down and tell me what it says under Customization? it should say something like (1209-4774) R6A.
Please let me know the numbers in the Parenthesis.
Thanks
same.. 1214-8735 R36A
I'm looking for a generic customized CDA for this phone. c905a
I want my wifi back, I tried changing the CDA to 1212-6123 R4A but SEUS said there was no update for the phone..?
Use this. It will load a generic ericsson software. Im trying to get the at&t software back to pull some apps off of it but its not working either. It keeps saying the same thing you're getting.
<?xml version="1.0" encoding="utf-8"?>
<customization>
<info>
<cda-number>1209-4774</cda-number>
</info>
</customization>
isn't that a CDA for the regular c905? I've read that it doesn't work properly on the -a variant.
Okay I tried a few different CDAs and none of them worked, SEUS always says nothing is avail.
1212-6123 R4A
1209-4778 R6A
1212-2674 (couldn't find revision so I used R3A) suggested on the davinci forums
fail.
So I'll have to do the old-school flash of main & fs w/ cust pack, but now what files do I use?
It seems that there isn't very good support for the c905a...
I just used generic. The phone wouldnt start up for me after this but it let me upgrade to whatever firmware I wanted through SEUS.
C905_R1BA034_FS_AMERICA_RED53.fbn
C905_R1BA034_MAIN_GENERIC_SI_RED53.mbn
After I upgraded I changed the CDA to at&t's and it worked.
So you non-SEUS flashed a c905 firmware then SEUS updated it again? Did it work after this? What would be the purpose of flashing the ATT CDA, wouldn't that cause SEUS to reflash the phone with the branded ATT firmware in the future?
Right now, I've got these files waiting on my desktop to flash with
C905_R1DA032_MAIN_GENERIC_SI_RED53
C905_R1DA032_FS_AMERICA_RED53
C905a_1212-2674_R6A_Customized_Generic_LAM_(b)
Seems at&t remove few features..Quote:
Originally Posted by sovanyio
Can't turn 3g off.
Lets us know it unlock phone to use Music as ringtones also..
Quote:
Originally Posted by sovanyio
might i ask where you got the main and fs files? i have the customized_generic.
thanks,
anyone have the original files for the phone before the flash?
looking for
CDA article: 1214-8735
CDA version: R36A
Default article: 1205-9083
Default version: R1BB026
Put this (unzipped) Attachment 7843 to TPA/preset/custom with A2Uploader, turn the phone on and off, then use SEUS. You'll get R1BB026_AT&T.Quote:
Originally Posted by coolx7
I just tried that. Still not gettting the AT&T version. Is there anything else I need to change in the customize_upgrade.xml file? Phone model? Language? Phone name? Region?
EDIT: Nevermind. I got it. Use this:
Code:<?xml version="1.0" encoding="utf-8"?>
<customization>
<info>
<model>C905a</model>
<cda-number>1214-8735</cda-number>
<cda-revision>R36A</cda-revision>
</info>
</customization>
It should work also without :Quote:
Originally Posted by trlehotan
<model>C905a</model>, or <cda-revision>R36A</cda-revision>