w850 CSloader refused to start GDFS services

my w850 can power on but still blank
here loq with setool2 lite

Code:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:29 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:W850i
MAPP CXC article: R1KG001    prgCXC1250204_CHINA_CY
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001
 
Operator: 000-00
 
Elapsed:10 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing F:\ALL FIRMWARE\sony ericsson\firmware universal\w850\New Folder\W850_R1KG001_MAIN_CHINA_CY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing F:\ALL FIRMWARE\sony ericsson\firmware universal\w850\New Folder\W850_R1KG001_FS_APAC_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:5140
Will flash 257 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:411 secs.

---

sometimes identity loq like here

Code:

---

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:19 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:26 secs.

---

but sometime normaly like this

Code:

---

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:W850i
MAPP CXC article: R1KG001    prgCXC1250204_CHINA_CY
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001
 
Operator: 000-00
 
Elapsed:7 secs.

---

please help me...
thanks in advance

fully reflash it then post log up to see if shows as a k700

Code:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:W850i
MAPP CXC article: R1KG001    prgCXC1250204_CHINA_CY
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001
 
Operator: 000-00
 
Elapsed:9 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/101
MODEL:HB1-06 Gen
VARIANT:APAC
LANGUAGE: EN
LANGUAGE: MS
LANGUAGE: ID
LANGUAGE: TL
LANGUAGE: VI
LANGUAGE: ZS

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35282601915696 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing F:\ALL FIRMWARE\sony ericsson\firmware universal\w850\New Folder\W850_R1KG001_MAIN_CHINA_CY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing F:\ALL FIRMWARE\sony ericsson\firmware universal\w850\New Folder\W850_R1KG001_FS_APAC_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:5140
Will flash 257 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (10240)
Customize.xml (1320)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
MEDIA_PLAYER_HOOK_3.itm (10240)
ORG_APPLICATIONS_HOOK_3.itm (10240)
preloaded_config.xml (99012)
SETT_RINGTONE_HOOK_1.itm (10240)
SETT_SCREENSAVER_HOOK_1.itm (10240)
SETT_STARTSHOW_HOOK_1.itm (10240)
SETT_WALLPAPER_HOOK_1.itm (10240)
VIDEO_PLAYER_HOOK_1.itm (10240)
Phone detached
Elapsed:412 secs.

---

yes flashing and customiz done but my phone still problem
show sony ericsson logo then please wait.... about 50% blank white...

what is my flexible....

thanks

i try to flash with JDFlasher
oflash main and fs done
ofs when after doble klik ofs show eroor like picture...

why my w850 can't flash customiz...
but using setool2lite or xs++ all done.

thanks in advance

http://www.topsony.com/forum/attachm...1&d=1243819869

were did u get ur files from to flash it

sorry i forgot the download file came from, i will try to download from this site...

now i change my flexible with new one
full flash it with setool2lite all done
when i power on the phone only show blank white and vibrate twice but sometimes vibrate continue

i am confuse when klik identity in setool2lite some time loq show

Code:

---

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.

---

i can't flash phone

but after try again it show loq identity normally and i can full flash done.

thanks you for advance.

what do u mean buy change flexible ? u mean the ribbon on ur phone or usb cable ?

yes i mine the ribbon on my phone.

what sould i do now?

i am search in this site but can't find complete installer or complete package of far jd flasher.
this only update of JD flasher.
can you give the link...?

<sorry for my english>

take it apart again then when u have put the ribbon top key pad and the lcd togver with out the slider part put the ribbon end one the phone mother board then hold the other end off the ribbon tight to the key pad then try to turn on when u change the ribbon u must allways change the top keypad or u will just be wasteing ur time

i have doing but the same result.

how about this sir.
flash complete done, when power on it show blink white and vibrate continuous

it is damage software or hardware....

thanks

hardwere :(

hi, my w850 is saying gdfs is k700 when i identify it, any ideas?