Printable View
Hello everyone.
Please help me.
I used seatoollite to flash my k610 and unlock simlock, but poorly for me the flash went wrong and now i can not turn the phone on. Still detected by Xs++ or Seatoollite.
What i can do ....?
I will post the log if needed.
Help please............................................ .......
:eek::eek::eek::eek::eek::eek::eek::eek::eek:
Use XS++ v 3.1 and flash K610 Main & FS ( and CDA = custom file for your region ).Quote:
Originally Posted by kissnguyen
Thanks for the reply and i did as you advice but still unable to turn on the phone.Quote:
Originally Posted by senter
What would i do more? here is the log file:
21:34:24| XS++ v3.1 (Darwin) Ready !
21:34:24| Executed on Microsoft Windows XP
21:34:31|
21:34:31| Attempting to open the interface...
21:34:31|
21:34:31| TURN OFF PHONE!
21:34:31| Hold 'C' button on phone and connect phone NOW.
21:34:31| You have 30 seconds...
21:34:31|
21:34:36| Baseband ID: 9900
21:34:36| Protocol Version: 3.1
21:34:36| Phone name detected!
21:34:36|
21:34:36| Profiling SEMC phone...
21:34:36| Platform: DB2020
21:34:36| OTP CID: 49
21:34:36| EROM CID: 52
21:34:36| EROM Color: Red
21:34:36| IMEI: 35171001xxxxxx
21:34:36| Phone ID: K610
21:34:36| Region: EUROPE_4
21:34:36| CDA: CDA102497/6 R3A
21:34:36| Firmware Version: R1JG001
21:34:36| EROM: R3A016
21:34:36| Ready for operation!
21:36:22|
21:36:22| Sending db2020_cid01_prodid_p3j.bin...
21:36:22| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
21:36:22| This is a PRODUCTION_ID loader
21:36:22|
21:36:22| Sending db2020_mem_patcher_cid52_r2a006.bin...
21:36:22| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
21:36:22| This is a MEM_PATCHER loader
21:36:22|
21:36:22| Sending db2020_cid52red_flash_r2a005.bin...
21:36:23| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
21:36:23| This is a FLASH loader
21:36:23| Now flashing firmware main...
21:36:23| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn
21:36:23| Header type: BABE
21:36:23| 117 flashblocks
21:37:20| Finishing flash
21:37:20| Done flashing
21:37:20| Flashing was successful
21:37:22| Disconnected... Unplug the phone
:confused::confused::confused::confused::confused:
You wrong!Quote:
Originally Posted by kissnguyen
You flash Main Firmware with File System (*.fbn) ??? - this is big mistake.
Must flash Main with *.mbn file !!!
File System with *.fbn file!
See here screenshots:
http://img263.imageshack.us/img263/9...080origpw0.jpg
http://img135.imageshack.us/img135/1...033origzh0.jpg
Ok Thanks again for your reply but where i can get the mbn file?
From Download section.Quote:
Originally Posted by kissnguyen
Ok thanks alot for helping me out .
Im flashing it now and i will ask you for more intructions if something goes wrong.
Big Thanks from finland.
Ok now just finished flashing main but still unable to turn on here is the log file please help me out:Quote:
Originally Posted by senter
22:35:15| Hold 'C' button on phone and connect phone NOW.
22:35:15| You have 30 seconds...
22:35:15|
22:35:15| Baseband ID: 9900
22:35:15| Protocol Version: 3.1
22:35:15| Phone name detected!
22:35:15|
22:35:15| Profiling SEMC phone...
22:35:15| Platform: DB2020
22:35:15| OTP CID: 49
22:35:15| EROM CID: 52
22:35:15| EROM Color: Red
22:35:15| IMEI: 35171001xxxxxx
22:35:15| Phone ID: K610
22:35:15| Region: EUROPE_4
22:35:15| CDA: CDA102497/6 R3A
22:35:15| Firmware Version: R1JG001
22:35:15| EROM: R3A016
22:35:15| Ready for operation!
22:35:20|
22:35:20| Sending db2020_cid01_prodid_p3j.bin...
22:35:20| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
22:35:20| This is a PRODUCTION_ID loader
22:35:20|
22:35:20| Sending db2020_mem_patcher_cid52_r2a006.bin...
22:35:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
22:35:21| This is a MEM_PATCHER loader
22:35:21|
22:35:21| Sending db2020_cid52red_flash_r2a005.bin...
22:35:21| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
22:35:21| This is a FLASH loader
22:35:21| Now flashing firmware main...
22:35:21| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn
22:35:21| Header type: BABE
22:35:21| 460 flashblocks
22:39:11| Finishing flash
22:39:11| Done flashing
22:39:11| Flashing was successful
22:39:13| Disconnected... Unplug the phone
Hi Again .
I restore the CDA and GDFS from backup but still unable to turn on the phone.
Any idea?
Thanks
u need to flash the fs files as well
Hi Yes I did but still no luck.
Thanks
how much charge is in ur battry and can u post a new log up from se tool light v1.11
Hi there
Yes I just charged full before flashing.
full bat.
Here is the log by se toolQuote:
Originally Posted by philzfog
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
Model:K610i
MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JG001
Language Package:EUROPE_4
CDA article: CDA102497/6
CDA version: R3A
Default article: cxc1250376
Default version: R1JG001
Service provider LOCKED
Operator: 244-91
Elapsed:24 secs.
here is the log i reflashed:
3:26:52| Executed on Microsoft Windows XP
23:26:56|
23:26:56| Attempting to open the interface...
23:26:56|
23:26:56| TURN OFF PHONE!
23:26:56| Hold 'C' button on phone and connect phone NOW.
23:26:56| You have 30 seconds...
23:26:56|
23:26:56| Baseband ID: 9900
23:26:56| Protocol Version: 3.1
23:26:57| Phone name detected!
23:26:57|
23:26:57| Profiling SEMC phone...
23:26:57| Platform: DB2020
23:26:57| OTP CID: 49
23:26:57| EROM CID: 52
23:26:57| EROM Color: Red
23:26:57| IMEI: 35171001xxxxxx
23:26:57| Phone ID: K610
23:26:57| Region: EUROPE_4
23:26:57| CDA: CDA102497/6 R3A
23:26:57| Firmware Version: R1JG001
23:26:57| EROM: R3A016
23:26:57| Ready for operation!
23:27:11|
23:27:11| Sending db2020_cid01_prodid_p3j.bin...
23:27:12| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
23:27:12| This is a PRODUCTION_ID loader
23:27:12|
23:27:12| Sending db2020_mem_patcher_cid52_r2a006.bin...
23:27:12| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
23:27:12| This is a MEM_PATCHER loader
23:27:12|
23:27:12| Sending db2020_cid52red_flash_r2a005.bin...
23:27:12| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
23:27:12| This is a FLASH loader
23:27:12| Now flashing firmware main...
23:27:12| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn
23:27:12| Header type: BABE
23:27:13| 460 flashblocks
23:30:59| Finishing flash
23:30:59| Done flashing
23:30:59| Now flashing filesystem...
23:30:59| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn
23:30:59| Header type: BABE
23:30:59| 117 flashblocks
23:31:56| Finishing flash
23:31:56| Done flashing
23:31:56| Flashing was successful
23:31:58| Disconnected... Unplug the phone
Hi there Guys
After a few reflashed i now get the phone turn on , thanks you Guys alot. But how can i get the simlock path???
here is the log when i tried to path it.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\fs\K610_R1JG001_Remove_SIM_lock.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Block @ $44700000 read error. Have only: 00000000 bytes
Elapsed:9 secs.
do u have the bypass box ticked and did u make the patch from there main u flashed to it
Poorly me again , now the phone is ALWAYS turnon when i connect to usb no matter what pressing C or not--..........????
1. Flash File System with K610_R1JG001_FS_EUROPE_4_RED52Quote:
Originally Posted by kissnguyen
http://img135.imageshack.us/img135/1...033origzh0.jpg
2. Mark Customize File System
Then select
Phone Model K610
CDA and Region Europe_4
3. Flash Main with K610_R1JG001_MAIN_GENERIC_TH_RED52
http://img263.imageshack.us/img263/9...080origpw0.jpg
Thanks alot Senter.
I need to path the Simlock but everytime i connect to Usb the phone turn on to usb mode pressing C or not.??
could u help me out this time? hihih last time not turn on , this time turn on always when using se tool to path..
Start SimLockPatchGen.exe then drag and drop K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn and you have unlock patch (*.vkp)Quote:
Originally Posted by kissnguyen
Use Setool2lite1.11 and reinsert battery befor begin!
1. Phone type: K610
2. On Files click Add and select K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn
3. On MISC files select unlock patch.
4. Click Flash button then hold "C" on phone and connect with USB cable.
After "part3" you must remove USB cable from phone and reinsert battery.
Then click Ready button on Setool and again hold "C" button and again connect with USB cable.
After flashing Main Setool ask you YES or NO - must click NO to apply patch!!!
When button Stop on Setool is active - again reinsert battery and turn on phone.
If you will add/remove other patches easy must apply Quick access patch (drag and drop Main to qamaker.exe)
Hi
unable to flash the unlock simpatch see the log file, because the phone is always turn on. Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Abort all operations.
Can't load ID loader !
Elapsed:156 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
Model:K610i
MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JG001
Language Package:EUROPE_4
CDA article: CDA102497/6
CDA version: R3A
Default article: cxc1250376
Default version: R1JG001
Service provider LOCKED
Operator: 244-91
Elapsed:6 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Enable either "Bypass DB2020 Security" or "Use quick access" !!!
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:23 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:24 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:17 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:39 secs.
Flash Main with XS.Quote:
Originally Posted by kissnguyen
Then apply unlock patch with Setool.
Your phone turn on when connect because you wrong in procedure to apply patch!
Read again my post how to apply unlock patch.
Hi Senter.
I gave up the simlock, but now when i put the operatorīs locked sim (worked before flashing) to the phone and it said that "inactive sim card" i put it to other phones it works fine.
What i can do?
Please help.
Thank you in adv.
inactive sim card means it has been barred normaly or u may have damged the gdfs on it
dont just wright any other to it or u will kill it also it may have had the imei patched to make it work so when u have reflashed it it has removed the patch :-(