Died K800i

Hi Friens.about 3 mounths ago I Flash My K800i To K810 and it hasnt problem until 3 days ago.since 3 days ago my phone was restarting every 2~3 minutes.today I Flash it with K810 Main & FS and now when i turn on the phone it shows a white screen.
SEtool2 Lite Log :
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Can't load ID loader !
Abort all operations.
Elapsed:1 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35399601498206 CERT:RED
FLASH CID:52 COLOR:RED

Model:K810i
MAPP CXC article: R8BA024 prgCXC1250811_GENERIC_SM
MAPP CXC version: R8BA024
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version: R4A
Default article: cxc1250813
Default version: R8BA024

Operator: 000-00

Elapsed:6 secs.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35399601498206 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Users\Surpriser\Desktop\Desktop2\New Folder (4)\K800i To K810\Main\K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Users\Surpriser\Desktop\Desktop2\New Folder (4)\K800i To K810\FileSystem\K810 R8BA024 FS M EAST N AFR RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4260
Will flash 213 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:534 secs.

Help Me Please:confused:

Excuse me for my bad English :D

try to reflash back to a k800 some lcds play up on k810i firmwere

Thanks for your answare.but i use k810 frimware for 3 mounth and havnt problem with lcd.

use other firmware version and see what' your phone is upto

hi
i reflsh it with K800 frimware and nothing changed!

i try to flash with XS++ and XS connot Flash Custom File:

05:01:09| Sending db2020_red52_cs_r3a009.bin...
05:01:10| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
05:01:10| This is a CHIPSELECT loader
05:01:10| Activating loader...
05:01:10| Activating GDFS...
05:01:24| This loader is UNLOCKED
05:01:24| Success! CS-loader has been unlocked!
05:01:24| Uploading customization files to phone...
05:01:24| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
05:01:24| Activating filesystem

and can't activate filesystem.

and setool log :
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:534 secs.

help me please

use se tool keep the custom pack in rar fourm add to the mics box and press flash and connect the phone

hi.thanks for your answare.i flash the Curom Files and it down successfully but nothing changed and when i turn on the phone it shows a white screen.
Setool Log :

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35399601498206 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (10240)
Customize.xml (1247)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
MEDIA_PLAYER_HOOK_3.itm (10240)
ORG_APPLICATIONS_HOOK_3.itm (10240)
preloaded_config.xml (78607)
SETT_RINGTONE_HOOK_1.itm (10240)
SETT_SCREENSAVER_HOOK_1.itm (10240)
SETT_STARTSHOW_HOOK_1.itm (10240)
SETT_WALLPAPER_HOOK_1.itm (10240)
VIDEO_PLAYER_HOOK_1.itm (10240)
Phone detached
Elapsed:34 secs.

can GDFS was dameged ?

it could be show me a new read out does it show as a k700 dont try to change the gdfs unless u know how i have a tut showing u how to do it please read it very carfully
Fixing A Damaged Gdfs - If Loss Off Signal (not Dead Phones ) - Top Sony Forums

hi.i read it carefully but i dont sure that my GDFS was damaged.sometimes when i ture it on sonyericsson logo shows and start a progresbar(in Please waite dialog) to complete but when completed about 70% the phone restarting and shows a white screen.
now what do you recommand me?

oh!!! now i try to connect my phone with XS++ and see this error:
IMEI name does not match GDFS name
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
and try to use setool and see this error:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:8 secs.

What i Can Do????????
i restore my GDFS Backup and Warnning Changed From:
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)

To:
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810)

Please Helpppppppppp Meeeeeeee:(

oh!!! now i try to connect my phone with XS++ and see this error:
IMEI name does not match GDFS name
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
and try to use setool and see this error:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:8 secs.

What i Can Do????????
i restore my GDFS Backup and Warnning Changed From:
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)

To:
Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810)

Please Helpppppppppp Meeeeeeee:(

does it still have a white screen after u restored the gdfs back up ?

im tried to reflash it with setool and give this error : "Header not acceped.phone will revovery" and can't do anything(Flash)

sometimes(every 1/15) sonyericsson logo shows but quickly restart and white screen shows again but usually(every 14 from 15) white screen shows.but it's interesting for me that when i restored GDFS see this error again:(Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810) in XS++.

Quote:

---

Originally Posted by Surpriser

im tried to reflash it with setool and give this error : "Header not acceped.phone will revovery" and can't do anything(Flash)

sometimes(every 1/15) sonyericsson logo shows but quickly restart and white screen shows again but usually(every 14 from 15) white screen shows.but it's interesting for me that when i restored GDFS see this error again:(Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810) in XS++.

---

Had it been crossflashed to K810i firmware before the GDFS backup was done? Having the phone identified in the GDFS as being a K810 is at least possible - every time I've seen that "k700" it's been some sort of GDFS error (well, unless the phone really IS a K700 :o )

Hi.i backup gdfs after flashing to k810 and havnt a gdfs backup from original frimware

Well, that explains that message - when you do the initial startup and customise.xml runs it sets up some GDFS variables, so you are seeing the values from the K810 firmware.

All I can suggest is to try reflashing MAIN, FS and the custom pack (using the original K800 firmware) and see if that works - I presume the GDFS backup was made at a point when the phone was working correctly?

If you can't get it to flash, try another file, on the chance that the firmware package is corrupted...

yes i backup GDFS when phone working correctly(But after flashing to K810).i reflash K800 Frimware with XS++ and after reconnect phone :

21:28:53| TURN OFF PHONE!
21:28:53| Hold 'C' button on phone and connect phone NOW.
21:28:53| You have 30 seconds...
21:28:53|
21:28:59| Baseband ID: 9900
21:28:59| Protocol Version: 3.1
21:28:59| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
21:28:59| ...using IMEI name
21:28:59|
21:28:59| Profiling SEMC phone...
21:28:59| Platform: DB2020
21:28:59| OTP CID: 49
21:28:59| EROM CID: 52
21:28:59| EROM Color: Red
21:28:59| IMEI: 35399601xxxxxx
21:28:59| Phone ID: K800
21:28:59| Region: M_EAST_N_AFR
21:28:59| CDA: CDA102568/6 R4A
21:28:59| Firmware Version: R8BA024
21:28:59| EROM: R3A016
21:28:59| Ready for operation!

i use K800 R8BF003 nut XS shows R8BA024!!!

after flash with XS Setool Indentify Log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539960149xxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version: R4A
Default article: cxc1250813
Default version: R8BA024

Operator: 000-00

Elapsed:5 secs.


i try to Reflash with Setool (after reflsh with XS and header accepted and dont show "Phone need recovery") and flashed the Main abd FS but when try to flash Custom Pack :

CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
chdir: 2
Directory not found, attempt to create
mkdir: 6
Break.
Elapsed:388 secs.

but i checked the directory and its correct!

and now when reconnect phone to setool ReSee this error:

Abort all operations.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.

Abort all operations.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.

check battry if u have no joy with fixing it today add me to msn and i will help u fix it when i fin work

hi people! i changed the CPU and all problems fixed! and now phone working correctly! but now have a another problem.when i connect my phone to setool give this error:

Quote:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 1/851
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:4 secs.

---

i check buttery , cable and its correct! i flash it with PhoneXS+ and flashed successfully but setool show this error again! what i can do?

Please help me!!!

is the phone fully working if so clean the fast port wear u plug ur usb in and allso try a diffrent usb lead it maybe faulty

Thanks for your answare.yes phone work fully.after change cpu imei changed!can gdfs damaged ? becuse when i connect it to phoneXs see this error: imei: null gdfs: k800

what are u useing se tool box ? as there is no free way to change imei u probly have damged loaders if evey thing eles is ok from my last post

Then what you recommand to use?
From your last porti dont understand what is fast port too clean it!

fast port is wear u plug ur charger in at the bottom off ur phone

Yes its clean.is there free way to fix it?

if its working i would just leave it or try to reflash it with the latest firmwere

I flashed the latest frimware with Xs but nothing changed and now i want to apply patchs and Xs cant do it so i need setool!

try it it with se tool see if it will work

Setool cant do anything and give the error that i say in 3-4 post ago.

there is a few things it can be a faulty flash ic or it needs a new fast port putting on ur phone or the usb cable

i cleaned the fast port - check usb call and full the battery and re flash with PhoneXS but setool re give this error :

Quote:

---

ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 1/851
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:4 secs.

---

and PhoneXS :
IMEI: Null GDFS: K800

What i can do?

Please help me!

Write script

Quote:

---

gdfswrite:0001085144554D4D5944415441

---

Quote:

---

Originally Posted by $uLLeR

Write script

---

Hi.thanks for your answer.but how patch it ?setool cant do anything with my phone.and what do this script?

Quote:

---

SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE

---

-its error after write GDFS.
Script for correct connect SETool and phone.

Quote:

---

Originally Posted by $uLLeR

-its error after write GDFS.
Script for correct connect SETool and phone.

---

hi.thanks.but how can write it without setool?

In MISC files choose script and press Write Script.

Hi.setool can not do anything and re show that error.

it wont as u have a damged flash chip or the fast port needs replaceing

Quote:

---

Originally Posted by philzfog

it wont as u have a damged flash chip or the fast port needs replaceing

---

Hi.but xs++ and jdflasher work correctly!