w800 flashed wrong address now phone dead
hello please help me repair my k750@w800
i tried to flash w800 R1BD MAIN to my phone to be used for elfpack. at the RAW address, i changed it to 4400-0000, len 0002-0000.
now phone phone wont turn on. XS, FAR and seatool wont recognize phone. tried 2+5 then plug USB, still phone not recognize.
any procedure to revive my phone to working state? i have backup of original GDFS, if it helps and a DCU-60 cable for flashing.
pls help me revive my phone
Thanks
Re: w800 flashed wrong address now phone dead
charge battry then try to refash main only what err does se tool give u
Re: w800 flashed wrong address now phone dead
it doesnt recognize the phone. already charged the battery in another cell, even used another battery still phone wont turn on, or be detected by any software.
when i did the flashing. it says something that EROM area will be written something...
Re: w800 flashed wrong address now phone dead
Re: w800 flashed wrong address now phone dead
what log? used far manager to flash the phone
Re: w800 flashed wrong address now phone dead
Reflash your phone with XS++ :
XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums and don't forget to customize File System
Re: w800 flashed wrong address now phone dead
the phone cannot be detected. thats why i cant reflash phone
Re: w800 flashed wrong address now phone dead
if u have wote any thing to the erom area which is very hard to do u may have killed it for good
Re: w800 flashed wrong address now phone dead
OMG? my phone s now BRICK?
i used far manager to flash a w800 main. edit the raw address to 4400-0000, length 0002-0000 (<- dats EROM, right?) far manager warned me about overwriting EROM but i did continue anyways. now phone is dead. doesnt turn on. xs and far cant detect anymore. tried wotan still cant be detected
is this really dead? no other way to revive EROM? service cable, cruiser? or watever means?
Re: w800 flashed wrong address now phone dead
it can be done if u have wrote something in the erom area u will have to use a setool/cruiserbox to do a full emty boardfill or test point it do u have a full battry and that phone wont carge the battry in its state
Re: w800 flashed wrong address now phone dead
0.0....im a newbie...im new to all this...but..try using the SEUS Manager.? thats what i did when my phone died...because i used some curroupted cid 53 frimware...now my phones cid 53..just network locked to rogers...
Re: w800 flashed wrong address now phone dead
UPDATE:
i had my phone fix at my local cellular shop. i let him fix EROM and have it newly flashed. but now my phone is CID49? he said when it updated erom, it made it CID49. he was using Setool Box and service cable.
is there anything i should be worried about? i still want to do MODS to thephone expecially ELF and patches.
thanks
HERES MY LOG
22:43:09| XS++ v3.1 (Darwin) Ready !
22:43:09| Executed on Microsoft Windows XP
22:43:19|
22:43:19| Attempting to open the interface...
22:43:19|
22:43:19| TURN OFF PHONE!
22:43:19| Hold 'C' button on phone and connect phone NOW.
22:43:19| You have 30 seconds...
22:43:19|
22:43:27| Baseband ID: 8040
22:43:27| Protocol Version: 3.1
22:43:27|
22:43:27| Sending db2010_cid00_prodid_p3l.bin...
22:43:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:43:27| This is a PRODUCTION_ID loader
22:43:27| Activating GDFS...
22:43:27| Phone name detected!
22:43:27|
22:43:27| Profiling SEMC phone...
22:43:27| Platform: DB2010
22:43:27| OTP CID: 36
22:43:27| EROM CID: 49
22:43:27| EROM Color: Brown
22:43:27| IMEI: 35655200xxxxxx
22:43:27| Phone ID: K750
22:43:27| Region: APAC_1
22:43:27| CDA: CDA102337/1 R2A
22:43:27| Firmware Version: R1DB001
22:43:27| EROM: n/a
22:43:27| Ready for operation!
Re: w800 flashed wrong address now phone dead
i don't think its a matter, you can mod CID49 too
Re: w800 flashed wrong address now phone dead
You should first convert it from BROWN to RED(for free), using D-Ultimate Unlocker
Re: w800 flashed wrong address now phone dead
@hyperion17 = how can i do the K750 CID49 brown to red conversion? i dont see K750/W800 in the phone support list. i have downloaded the program :(
Re: w800 flashed wrong address now phone dead
Sorry, you're right, it supports only A2, DB2020 & DB2012 and PDA DB2000/DB2001. I was confused by the green sentence Conversion of all Blue/Brown phones to RED (retail) Free. Read this: Patching BROWN cid49 K750 - Top Sony Forums
Re: w800 flashed wrong address now phone dead
what log?? use x++3.2 to slove it
Re: w800 flashed wrong address now phone dead
I killed a phone but just used SEUS as someone else stated and it worked for me. Although it does install CID53 for the K810i I had a problem with.
Good luck with it