i tried to flash my phone and i accidentally inserted the wrong firmware, is there anyway of fixing it?
*i use setool2lite to flash it...
Printable View
i tried to flash my phone and i accidentally inserted the wrong firmware, is there anyway of fixing it?
*i use setool2lite to flash it...
Download the correct firmware, and flash it again.
the thing is i cant really find it, its R6BE001 RED52..
its really gayy, i just got my phone from a friend. T.T
You can use any W580 CID52 firmware, not just the version R6BE001.
Please post an identify log, to be able to help you more.
didnt workk... it says that it failed and it is fatal. it couldnt read the GDFS
heres a log of what happen:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35923501318483 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35923501318483 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:544 secs.
please someone help me!
also, i had an idea, im sorta noob at this, and i was wondering how do i put in my old GDFS in my phone??
oh, and i backed it up, so its really mine.
if it is the gdfs from that phone then wright it back then reflash it full but u may have to do it in 3 parts to get it to load 1main then try to turn it on then the fs on its own and then the custom pack
UPDATE 2
---------
alright, i wrote back my old gdfs (FINALLY IT WORKED!) and now it wont work or connect.. but i think that happens all the time, seeing that the 'usb has been removed' triggers when half of the flashblocks stop. but what i need to do is flash it fully. do i need to add something to reflash it fully?
Flash first W580_R8BE001_MAIN_GENERIC_LA_RED52 , or
W580_R8BE001_MAIN_NAM_1_LA_RED52, by holding "2 + 5" instead "C", then flash
W580_R8BE001_FS_AMERICA_1_RED52 and make customization with HB1-06_Gen_CDA102568_106_R8A_GENERIC_AMERICA_1
2 and 5 is boot mode for se phones or 2 and * on w880
So what is difference between "C" and "2 + 5" ?
alriight, usb things happening, but it'll fix up soon. alright, so about custom firmware, how do i put it in, and hyper, what are you using? xs++ or setool?
In Setool2Lite 1.11, put the custom file in ".zip" archive to "MISC Files" and press "Flash"
alright, it took me a while but i flashed the main and the fs, now its time to flash the custom pack. is there anything i should know before i do it? like how to do it on xs++ which i started using?
UPDATE
--------------
my phone is finally working, but now it wont accept my sim card. help? but first of all, i'd like to thank you guys, you really helped alot.
needs unlocking now buddie ;)
hey everyone, i just wanted to say my phone is fixed thanks to an official sony ericsson update.. bad thing, its now CID53. sadly, my attempt of unlocking lead me back to square one. oh well, theres always next phone...
thanks everyone! really big help.
What is difference between "C" and "2 + 5"? Is any?
2 and 5 button is use for dead phones c just to reflash normaly
hey man, its still possible to flash your phone. so dont give up! use FAR and JDflasher.