Gdfs backup wont write

HELP omg this is the second time this has happened but last time i didnt have a backup.

My dad will kill me if i have to buy a new phone.

Ok i put the correct patch on my phone but it didnt work, no problem happens all the time and removes gdfs.

This time i pressed write gdfs and it just says "executing cs loader gdfs startup" and stays like that for about 3 minutes then says opperational failed, that is fatel. What do i do????

I have a gdfs backup but when i had the backup made it was a differant firmware. at the moment i have R4ea031 and i think before it was R4ed001 but when i open the gdfs in notepad it says somewhere


2E0W ¹ Generic º
c» CENT_EUROPE ¼# CDA12345678/123 *- R2A ¾# cxc1250324 ¿- R4GC010

Im guessing the R4GC010 is my firmware????


Please reply soon i have a w810i cid49 red ( battery is fine)

show me a read out from se tool bud

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233.......... CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Desktop\Phone\setool2lite_1.11\rest\R4EA0 31_CXC1250316_GENERIC_HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Abort all operations.
wrong response, break.
failed, that is fatal
Elapsed:82 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3523370...... CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Desktop\Phone\setool2lite_1.11\rest\R4EA0 31_CXC1250316_GENERIC_HN"
Elapsed:35 secs.

how much charge do u have in the battry ? and is it a gdfs back from that phone ?

Yes my real own GDFS and i have plenty battery left dont worry

so when u add it to the mics box in se tool is it in bin form

Probably the problem is that you don't have the required rest file:

Quote:

---

can't open file "C:\Documents and Settings\Desktop\Phone\setool2lite_1.11\ rest\R4EA031_CXC1250316_GENERIC_HN"

---

So first you need to make the R4EA031_CXC1250316_GENERIC_HN rest file with ssw2rest.exe located in [SeToolLite_folder]\make_rest\ folder(in your case C:\Documents and Settings\Desktop\Phone\setool2lite_1.11\make_rest\ ).

noob here..can anyone tell me how to use vkp patches? using which sortware is the easiest? SEtool or xs++3.1?
btw, im trying to apply patch for k800 cid 52. pls pm me..need spcific answer. tq

Setool lite.

Look here:

Flash your phone and How to apply or remove patch using SETool 2 Lite

Have a nice day

Yes it is in bin format

hi evryone i followed simox's instructions and now it says on xs++:



18:10:44| XS++ v3.1 (Darwin) Ready !
18:10:44| Executed on Microsoft Windows XP
18:10:49|
18:10:49| Attempting to open the interface...
18:10:49|
18:10:49| TURN OFF PHONE!
18:10:49| Hold 'C' button on phone and connect phone NOW.
18:10:49| You have 30 seconds...
18:10:49|
18:10:51| Baseband ID: 8040
18:10:51| Protocol Version: 3.1
18:10:51|
18:10:51| Sending db2010_cid00_prodid_p3l.bin...
18:10:51| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
18:10:51| This is a PRODUCTION_ID loader
18:10:51| Activating GDFS...
18:10:52| Phone name detected!
18:10:52|
18:10:52| Profiling SEMC phone...
18:10:52| Platform: DB2010
18:10:52| OTP CID: 49
18:10:52| EROM CID: 49
18:10:52| EROM Color: Red
18:10:52| IMEI: 35233701xxxxxx
18:10:52| Phone ID: W810
18:10:52| Region: CENT_EUROPE
18:10:52| CDA: CDA12345678/123 R2A
18:10:52| Firmware Version: R4GC010
18:10:52| EROM: n/a
18:10:52| Ready for operation!
18:11:08|
18:11:08| Sending db2010_cid49red_flash_r2a003.bin...

Done,if you need something else contact me.

I like this script.