[SOLVED] Error during unblocking!!!!PLS HELP

Hello guys!

During my last unlocking of my SE k770i I ran on the error that I dont know how to fix myself:

Here is a log of my last session:

Code:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35223902022587 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:K770i
Brand:SI vodafone
MAPP CXC article: R8BA024    prg1201-7601_VODAFONE_VI
MAPP CXC version: R8BA024
Language Package:VFE_LIVE_3
CDA article: 1203-3998
CDA version: R3A
Default article: 1201-7603
Default version: R8BA024
 
Network LOCKED
Operator: 293-40
 
Elapsed:5 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35223902022587 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35223902022587 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\Documents and Settings\Administrator\Desktop\New Folder\K770_R8BA024_MAIN_GENERIC_VI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
verify block error
last blk:44810000,00010000
Elapsed:619 secs.

---

I happened 2 times in a row, so is there anything I can to overcome this block error interrupt and unlock my phone normally?

REgards

Sin

If you don't want to debrand - than you use wrong MAIN.You need this MAIN:
K770_R8BA024_MAIN_VODAFONE_VI_RED52 and you need to create new QA patch with that MAIN

Seamonkey, thx for reply.
Yes I want to do debrand and than use slovenian mobitel costum pack.

I tried your recepie and it didnt work.
I tried to restore GDFS and XS++ said it was restored but i got no response from the phone.
When try to turn it on nothing happens.
At least it identifies with xs++ and SE tools, but I need to know what to do next in order to make it work.

Thx for any kind of help you can provide.

Sin

I think i finnaly made it to fuck it up.
Now it doesnt want to identify with SETools nor with XS++.

Any ideas guys?

Published by vnvnation
Razón: Reason: Consecutive messages

Quote:

---

Originally Posted by Sin

I think i finnaly made it to fuck it up.
Now it doesnt want to identify with SETools nor with XS++.

Any ideas guys?

---

Try to upgrade with SEUS. If SEUS doesn't want to identify the phone, go to service.

DO NOT use SEUS in any circumstances, because your EROM will be upgraded to CID53.

Quote:

---

Now it doesnt want to identify with SETools nor with XS++.

---

Check if the battery has enough charge. Then try to repair the EROM: REPAIRING EROM GUIDES for most sonyericsson phones, reflash your phone and then unlock it.

Guys thx for reply, here is a log ov repare:

Quote:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35223902022587 CERT:N/A
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:15 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:43 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35223902022587 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
failed, that is fatal
Elapsed:196 secs.

---

Any suggestions what else can be done?

Try to make a EROM-Update with KulanKendi Client for free, but be aware NOT to upgrade to CID53. Just flash CID52 EROM.
If that does not help you can try to flash GDFS-backup if you got one from the time when the phone was working.
If not bad luck, looks like GDFS is damaged or security zone and only an Ultimate Unlocker credit can help you or hardware like SETool or Cruiser.

Quote:

---

Originally Posted by MadMax71

Try to make a EROM-Update with KulanKendi Client for free, but be aware NOT to upgrade to CID53. Just flash CID52 EROM.
If that does not help you can try to flash GDFS-backup if you got one from the time when the phone was working.
If not bad luck, looks like GDFS is damaged or security zone and only an Ultimate Unlocker credit can help you or hardware like SETool or Cruiser.

---

why would upgradeing ur cid damge u gdfs ? the phone will still work fine just u will have to use jdflasher to flash it :)

I have GDFS backup, but Xs++ and SETools dont recognise my phone, so I cant recover it.

is it from that phone the gdfs back up?

Quote:

---

Originally Posted by Sin

I have GDFS backup, but Xs++ and SETools dont recognise my phone, so I cant recover it.

---

Try to connect your phone like here plz help... k810 is dead what can i do ? - Top Sony Forums and follow every single step(if your GDFS is ok than this should be work)

this is what i get from SETOOl:

Quote:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 0/13
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:10 secs.

---

As I said I allready have GDFS backup but dont know how to implement it with SETOOLS.
Another thing is that my phone cannot identify every time i connect it so its not quiet easy to synchronise this two things.

So guys what do you suggest me to do, I will not do nothing on my own from now on?

THx

Sin

First of all - try to charge battery or borrow from friend,than try to clean phone connector,change USB port - it's seems you have some connection problems and than try to connect with any tool

Quote:

---

As I said I allready have GDFS backup but dont know how to implement it with SETOOLS.
Another thing is that my phone cannot identify every time i connect it so its not quiet easy to synchronise this two things.

---

Flash your phone and How to apply or remove patch using SETool 2 Lite

Have a nice day

THx guys.
The batterry was empty, so I gave it to a friend of mine to recharge it.
Later when i get battery I will try to fix it and offcourse write report here.

THx again

I made it to flash and debrand it, thx a lot for that, but now I have another problem.
I dont want to mess this forum with repeting myself, so here is where explanation of my problem is :

Unlocking k770i - Top Sony Forums

thx

Thread closed. Both Thread solved.

Have a nice day