Once i apply (ElfPack_mod_v5_w800_r1bd001) my phone turn on and just keep on restarting on white screen. HOW TO PREVENT THIS? AND HOW TO FINALLY APPLY ELFPACK v.5?
EROM: CID49 (RED)
Thanks! :)
Printable View
Once i apply (ElfPack_mod_v5_w800_r1bd001) my phone turn on and just keep on restarting on white screen. HOW TO PREVENT THIS? AND HOW TO FINALLY APPLY ELFPACK v.5?
EROM: CID49 (RED)
Thanks! :)
Please help me! :(
i will never apply elfpack mod v.5 for my k750@w800 :(
uhhh... did you uninstall the last elfpack??
i reflashed FS from r1bd001 to r1bc002. And i'm going to reflash main now... :(
APPLYING:
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35570501888081 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
Starting to process VKP patch script: C:\Manto\K750toW800\ELFs\ElfPack_mod_v5_w800_r1bd0 01.vkp
VKP script loaded OK. Lines: 471
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44060000
New block #0001 added: $44280000
New block #0002 added: $448E0000
New block #0003 added: $44EA0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $451E0000
New block #0007 added: $45200000
Blocks selected OK. Reading blocks: 8
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
Block 7 written
VKP script executed OK
Elapsed:105 secs.
---------------------------------------------------------
REMOVING:
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35570501888081 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
Starting to process VKP patch script: C:\Manto\K750toW800\ELFs\ElfPack_mod_v5_w800_r1bd0 01.vkp
VKP script loaded OK. Lines: 471
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44060000
New block #0001 added: $44280000
New block #0002 added: $448E0000
New block #0003 added: $44EA0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $451E0000
New block #0007 added: $45200000
Blocks selected OK. Reading blocks: 8
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
Block 7 written
VKP script executed OK
Exception in ReadCommblock
Elapsed:134 secs.
I have created, uploaded:
Other -> Zbin -> Config -> ELF icons -> DYN_CONST.bin
Other -> Zbin -> BlibCreator.elf
Other -> Zbin -> BlibUpdater.elf
Other -> Zbin -> Lib -> DYN_CONST.bin
Other -> Zbin -> Lib -> lib.vkp
Other -> Zbin -> Lib -> swi_update.ini
http://main32.googlepages.com/elfpackpic.bmp
Is it correct?
I reflashed main firmware, but still...Quote:
Originally Posted by xxokixx
Help me. Please! :(
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35570501888081 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
writing C:\Manto\K750toW800\W800 Firmware\W800 R1BD001 cid49.bin
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
Elapsed:366 secs.
I notice ,but don't now is this real - you have empty space in .vkp
ElfPack_mod_v5_w800_r1bd0 01.vkp and .vkp must be in one - like this -
ElfPack_mod_v5_w800_r1bd001.vkp
DYN_CONST.bin goes in: Usb-> Other-> ZBin -> Config -> DYN_CONST.binQuote:
I have created, uploaded:
Other -> Zbin -> Config -> ELF icons -> DYN_CONST.bin
Other -> Zbin -> BlibCreator.elf
Other -> Zbin -> BlibUpdater.elf
Other -> Zbin -> Lib -> DYN_CONST.bin
Other -> Zbin -> Lib -> lib.vkp
Other -> Zbin -> Lib -> swi_update.ini
Other -> Zbin -> BlibCreator.elf - OK
Other -> Zbin -> BlibUpdater.elf - OK
1. put lib.vkp in tpa/user/other/ZBin/Lib/
2. Run BlibCreator.elf
3. swi.blib will be created in "Lib"
4. Uninstall last ElfPack (only ElfPack, not Library)
5. Install ElfPack Mod V5
hope this help you
Actually I am Yet Confused about this elfpack. How it will work & what is it for? It will be good if anyone make topic by describing with a tutorial on about it.