Do they share the same firmware?
BTW, I've seen from some place they have different bands. One is 900/1800/1900, and the other is 850/1800/1900.
Can anyone helps to clarify?:confused:
Printable View
Do they share the same firmware?
BTW, I've seen from some place they have different bands. One is 900/1800/1900, and the other is 850/1800/1900.
Can anyone helps to clarify?:confused:
a= America
i= International
I recomend you the "i"
Mine is W350a. Do you mean there won't be any problem if I used the W350i firmware? Thank you very much!Quote:
Originally Posted by djrulaz
be carful as after u have flashed it may end up with no network on ur phone happens on k790 and k800 a lot same phone diffrent main and fs
Are these the right files I can use?Quote:
Originally Posted by philzfog12
W350_R11CA002_FS_TAIWAN_RED53,
W350_R11CA002_MAIN_TAIWAN_JH_RED53, and
HB1-06_Gen_CDA102568_105_R11A_GENERIC_TAIWAN?
is ur phone a cid 53
Connect your phone to xs++ and copy here your phones log without IMEI number.
It depends which language do you want to have on your phone.
Have a nice day
22:38:07| TURN OFF PHONE!
22:38:07| Hold 'C' button on phone and connect phone NOW.
22:38:07| You have 30 seconds...
22:38:07|
22:38:15| Baseband ID: D000
22:38:15| Protocol Version: 3.1
22:38:15| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
22:38:15| ...using GDFS name
22:38:15|
22:38:15| Profiling SEMC phone...
22:38:15| Platform: PNX5230
22:38:15| OTP CID: 52
22:38:15| EROM CID: 53
22:38:15| EROM Color: Red
22:38:15| IMEI: 35623702xxxxxx
22:38:15| Phone ID: n/a
22:38:15| Region: n/a
22:38:15| CDA: n/a n/a
22:38:15| Firmware Version: n/a
22:38:15| EROM: n/a
22:38:15| Ready for operation!
22:39:02| Sorry, your phone is NOT SUPPORTED
22:39:02| Sendinging shutdown signal to phone...
22:39:04| Shutting down...
Yes,your phone is CID53 ,so that files are correct if you want this languages English - Chinese traditional Taiwan and only tool for flashing CID53 phones are jdflasher (Flashing with jdflasher - Top Sony Forums)
I followed Flashing with jdflasher to upgrade my W350a (AT&T) and got an error:Quote:
Originally Posted by seamonkey
log started. plugin compiled Jan 3 2008 / 13:54:44
create session object
used script: pnx5230.xml
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: D000
cid detect
<- cid=53 color=red platform=pnx5230
qhldr: 071213 1552 R2A022_PNX5230_FLASHLOADER.5230_53_RED
<- hello: 071213 1552 PERCXC1720441_R2A022_PNX5230_FLASHLOADER
activateloader
flashID: 897E (Manufacturer: Intel)
<- OTP: status 0 locked 1 cid 52 cert 1 IMEI 35623702xxxxxx
flashing babe: W350_R11CA002_MAIN_TAIWAN_JH_RED53.mbn
flashing 480 blocks
error: PutFiles(putfile(putfile_flash(flashbabe(get89data (IOusb::getblock(time exceed))))))
flashing babe: W350_R11CA002_MAIN_TAIWAN_JH_RED53.mbn
error: PutFiles(putfile(putfile_flash(flashbabe(header(se nd89data(IOusb::sendblock(IOusb::dcu_WriteData(tim e exceed))))))))
error: SetDirectory(setdir(cmd14(send89data(IOusb::sendbl ock(IOusb::dcu_WriteData(time exceed))))))
Now, I can't even turn on the phone. Please Help!!!
Put a log of setool2lite
Welcome to SEtool2 ( LITE edition ) v 1.11Quote:
Originally Posted by djrulaz
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Will backup GDFS now.
ChipID:D000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:0 secs.
Oh...
Some times accept the Cid 53...
Forget it...
Finally I got it back to work. I've tried to reflash it with the same PC but got the same message. Then I tried with another PC, everything were perfact. I guess the problem might be the USB port of the first PC. Thank you all.