hi.im looking for my v800 firmware with greek language.
if anyone know anythink plz say somethink.thanx
Printable View
hi.im looking for my v800 firmware with greek language.
if anyone know anythink plz say somethink.thanx
You need this 3 files:Quote:
Originally Posted by kalimera
MAIN: W800_R1NA005_MAIN_EU_1_CA_RED36
FS: W800_R1NA005_FS_EMEA_3_RED36
CUSTPACK: W800i_CDA102430_3_R2A_Generic_EMEA_3
If your phone is CID49, you can search for w800_Language_EMEA_3, and add el.lng and el.T9, following this tutorial :http://www.topsony.com/forum/showthread.php?t=2806
"Kalimera"="Goodmorning" asked a firmware for V800.
Can you flash a V800 with the above firm of W800 that you gave?
I think you can't... only K750 can transform in W800, right?
I have a huge problem with V800 too.:(
This is my xs++ log:
The problem is that i've made an upgrade with below files:Quote:
02:51:38| XS++ v3.1 (Darwin) Ready !
02:51:38| Executed on Microsoft Windows XP
02:51:50|
02:51:50| Attempting to open the interface...
02:51:50|
02:51:50| TURN OFF PHONE!
02:51:50| Hold 'C' button on phone and connect phone NOW.
02:51:50| You have 30 seconds...
02:51:50|
02:51:55| Baseband ID: 7100
02:51:55| Protocol Version: 3.1
02:51:55|
02:51:55| Sending db2000_cid00_prodid_r2b.bin...
02:51:56| Applet ID: 050810 0923 NPA1CXC125871_PRODUCTION_ID_LOADER R2B
02:51:56| This is a PRODUCTION_ID loader
02:51:56| Activating GDFS...
02:51:56| Cannot open GDFS
02:51:56| Activating GDFS...
02:51:56| Cannot open GDFS
02:51:56| Activating GDFS...
02:51:56| Cannot open GDFS
02:51:56| Activating GDFS...
02:51:56| Cannot open GDFS
02:51:56| Activating GDFS...
02:51:56| Cannot open GDFS
02:51:56| Warning: IMEI name does not match GDFS name (IMEI:V800 GDFS:n/a)
02:51:56| ...using IMEI name
02:51:56|
02:51:56| Profiling SEMC phone...
02:51:56| Platform: DB2000
02:51:56| OTP CID: 36
02:51:56| EROM CID: 36
02:51:56| EROM Color: Red
02:51:56| IMEI: 35488500xxxxxx
02:51:56| Phone ID: V800
02:51:56| Region: n/a
02:51:56| CDA: n/a n/a
02:51:56| Firmware Version: n/a
02:51:56| EROM: n/a
02:51:56| Ready for operation!
02:52:08| Sendinging shutdown signal to phone...
02:52:08| Done.. You may now connect again...
02:52:08| Shutting down...
Z800_R1Y005_MAIN_EU_2_VI_RED36.mbn
Z800_R1Y005_FS_EUROPE_2_RED36.fbn
and phone writes now (system info): Z800!!!
But i have this "configuration error" and i've tried everything!
xs++ can't execute also a vkp patch for unlocksim!:(
I don't know what to do?
Is there any way to unlock/debrand an old V800, DB2000, CID36?
xs++ didn't do anything.
setool 1.1 is not for CID36.
what else now?
someone help PLZ?!:o
First of all that error is because you didn't finish flashing with CUSTPACK,so apply custpack and than your phone work normally and use this Flashing with jdflasher - Top Sony Forums for unlock - work without problems with CID36 phones
Thanks a lot.
I'll give a try.
But if i remember well, far-manager uses dcu-60 cable and V800 port has only mini-usb.
Mini-usb is the same with dcu-60?
Do i have to install any cable drivers?:confused:
I've already installed only Gordon's Gate flash drivers.
Ah, and i didn't install Z800 (ex-V800) usb drivers, so every time i plug in the phone, pc popup-wizard askes me for Z800 drivers.
Are they necessary?
Thanks again.
(and sorry for my english):o
I'm desperate!:(
Far+JDflasher don't have db2000 or z800!
I've tried K300, K700 and only with K600 i get bflash and bfs.
I never saw ofs in any compination!:(
All the programs cannot read the loader.
edit:
which version of JDflasher has a db2000, cid36 script?
In Far folder Plugins - SEFP - scripts - must be Z800_CID36 script,if you have than select instead jdflasher - SEFP plugin - that should be work
:)
OK, with SEFP there is choice for z800_cid36.
I can see only 2 folders:
Flash + FS.
"Flash":
When i use the "enter" button"==> "Script code execution error code = 0"
"FS":
When i use the "enter" to go into the folder==> <Bl1drH) cab used with service cable only. Error = 120.
(i have only miniusb cable).
I think that the problem is that something happened with GDFS!
But, i upgrated the phone from V800 to Z800, the system information (>*<<*<) says Z800 but i have the "configuration error" and if i want to customize/custpack the FS, then xs++ is using bruteforce.
Far+SEFP are crashing.
Setool lite 1.1 doesn't support cid36.
So, suicide is the only way now!!!
Simlock patch worked thru jdflasher except the network and unfortunately i use another company than Vodafone simcard.
Is there any cheap online service working on weekend?
Is there any patch for z800 firmware to break the loader for not making bruteforce?
Or shall i try to write a new GDFS for z800? (z800_GDFS.bin)
Thank you again for your time seamonkey.