Printable View
I try flashing K800 to K810 when press power on it show SE logo then it start loading for the first time and the phone LCD flashing very fast showing white screen and loading screen until it get to standby the LCD still flashing white. Flashing back to K800 the result normal like before. Try flash to K810 again with other version the problem still the same. This Phone is CID52 Red.
Please help, anyone have the solution? :confused: :confused:
probably your phones GDFS is DEAD
do you heave any GDFS Backup?
Do you try another firmware?
swaping ur phone to a k810i may have dameged the gdfs in it wright the k800 gdfs back to it if u made a back up DONT WRIGHT SOME ONE ELES GDFS !!reflash it back to the latest k800 u can get it from here New K800i R8BF003 Firmware - SE-NSE Forums
If GDFS damage would it be alright if we flash back to K800?
I didn't repair the GDFS but I flash back to K800 and it work fine.
Flash again to K810 still got flashing display.
So if you try 2 times flashing your K800 to K810 with same problem WHY you again trying- Do you whish DEAD phone or what????'Quote:
Originally Posted by Chien
There is nothing wrong with GDFS, otherwise the phone wouldn't work.
On the other hand I would follow seamonkey's advice, really... You will not gain anything useful from converting K800 to K810, but you will get a couple of problems instead.
GDFS is definatly not dead then, otherwise your phone wouldnt just magically work finw when you flashed it back to the proper firmware. so you dont need to repair your GDFS. but for future use, remember to always back up your GDFS. and like eveyone else said...why you flashing your phone to a model its not?...if you want it so badly then buy the model.
try another firmware
Hey cna u help me.Quote:
Originally Posted by kapaionutz
My phone GDFS is dead
It is not starting & not getting detected.
But when i press 2+5 its detected sony flash rom.
But i dont know how to repair it.
because xs++ is not going ahead
Here is the XS++ log
16:37:06| TURN OFF PHONE!
16:37:06| Hold 'C' button on phone and connect phone NOW.
16:37:06| You have 30 seconds...
16:37:06|
16:37:09| Baseband ID: 9900
16:37:09| Protocol Version: 3.1
Please help.
Use SE Tool Lite
click on repairing tab
press 2+5 while connecting.
try this for 6 to 8 times.
if not work then try pressing c
after some time your gdfs will get in mode for repairing.
after that connect your phone pressing c. then restore the GDFS (hope u created back up before)
then restore original firmware.
Fortunately, I had backup of my GDFS.. There is NOTHING WRONG with it, otherwise the phone will be DEAD and method "press C and connect USB" does not work and the phone won't boot up! I restored my GDFS and the result is again white screen blinking.. I gave up this upgrade and flashed with K800 firm...Quote:
Originally Posted by kapaionutz