BRICKED M600i

Hi

I have trired to unbrand Vodafone M600i with the following method which worked for many people. i.e. Back up the phone -> go to SEUS and quit -> use XS++ to change the soft -> Then update and done. HOWERVER i have dont some stupid moves and there goes my phone !!!

what I did was the folowing :

Done a backup using PC Suit -> used SEUS to update the firmaware but instead of quitting i continued new Vodafone update that was recomended by SEUS and at 53% i just disconnected the lead and from then bang ! when i try to press power button and C then the phone flashes (keyboard + screen) and does that few times and dies ! another worse thing is that the battery was not fully charge during the update and when i want to charge it the keyboard and screen flashes as before THIS SUCKS and i know THAT I DID THIS AT MY OWN RISK, but please help

This phone meant to be given to someone but i doesnt work HELP :

Thanks ! V much if anyone manages to fix this problem.

so i take it you cant connect to your computer by opening xs++ and holding c and connecting cable.

if you can't then it sounds totally bricked to me but if you can post your log and people may be able to help you mate.

Yes i can connect it to the XS++ and SUES here is the log if that enough THANKS FOR INTEREST !

I did try too many things and my log is long so i send you last few tries to save it :D

12:29:00| XS++ v3.1 (Darwin) Ready !

12:29:00| Executed on Microsoft Windows XP

12:29:06| Executing SEMC Smartphone Operations!

12:29:06| Please hold boot key ('@' or 'C') and connect device...

12:29:34| Disconnected... Unplug the phone

12:29:42| Executing SEMC Smartphone Operations!

12:29:42| Please hold boot key ('@' or 'C') and connect device...

12:30:10| Disconnected... Unplug the phone

12:30:31| Executing SEMC Smartphone Operations!

12:30:31| Please hold boot key ('@' or 'C') and connect device...

12:30:43| Master Port detected: COM8

12:30:43| Slave Port detected: COM9

12:30:43| Opening Port!

12:30:43| INIT MASTER...OK!

12:30:43| PHONE INFO SAMPLED...OK!

12:30:43| EPOC APPLET HEADER SENT...OK!

12:30:43| APPLET BODY SENT...OK!

12:30:43| SHUTTING DOWN MASTER...OK!

12:30:45| Baseband ID: 7100

12:30:45| Protocol Version: 3.1

12:30:46| Speed set to 460800

12:30:46|

12:30:46| Sending db2000_cid03_prodid_p3b.bin...

12:30:48| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B

12:30:48| This is a PRODUCTION_ID loader

12:30:48| Activating GDFS...

12:30:48| Phone name detected!

12:30:48|

12:30:48| Profiling EPOC smartphone...

12:30:48| Platform: DB2001

12:30:48| OTP CID: 49

12:30:48| EROM CID: 49

12:30:48| EROM Color: Red

12:30:48| IMEI: 35931500xxxxxx

12:30:48| Phone ID: M600

12:30:48| Part Number: FAD-3022012-BV

12:30:48| Phone smartphone version: R1E01

12:30:48| Phone software version: CXC162037 R9F011

12:30:48| Processing Unit: CXC162098 R6A03

12:30:48| Bluetooth:

12:30:48| Organizer: CXC162071 R6A16

12:30:48| CDA: CDA162011/1 R6A13

12:30:48|

12:30:48| ... and the phone lock code is: 0000

12:30:48|

12:30:48| Ready for operation!

12:31:32|

12:31:32| Sending db2001_cid49red_cs_p1e.bin...

12:31:48| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E

12:31:48| This is a CHIPSELECT loader

12:31:48| Activating loader...

12:31:48| Activating GDFS...

12:31:48| This loader is UNLOCKED

12:31:48| Restoring the GDFS...

12:31:48| Attempting to write 1701987131 variables...

12:31:56| Failed: Block 0x61 Unit 0x6574

12:31:56| Wrote 1 variables!

12:31:56| GDFS was restored successfully!

12:31:56| GDFS operation was successful

12:31:58| Disconnected... Unplug the phone

12:32:25| XS++ v2.0 Ready !
12:32:25| Executed on Microsoft Windows XP
12:32:32| Executing SEMC Smartphone Operations!
12:32:32| Please hold boot key ('@' or 'C') and connect device...
12:32:47| Master Port detected: COM8
12:32:47| Slave Port detected: COM9
12:32:47| Opening Port!
12:32:47| Init master...Init OK!
12:32:47| Aquiring phone info...Info sampled OK!
12:32:47| Sender application header...Sent OK!
12:32:47| Sending application...
12:32:47| Sending db2000_application1_epoc.bin...
12:32:47| Sent OK!
12:32:47| Shutting down...Master Shutdown OK!
12:32:49| Baseband ID: 7100
12:32:49| Hardware Platform: DB2000 Smartphone
12:32:49| Protocol Version: 3.1
12:32:50| Speed set to 460800
12:32:50|
12:32:50| Sending db2000_cid03_prodid_p3b.bin...
12:32:52| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
12:32:52| This is a PRODUCTION_ID loader
12:32:52| Activating GDFS...
12:32:52| Phone name detected!
12:32:52|
12:32:52| Profiling EPOC smartphone...
12:32:52| Baseband ID: DB2001
12:32:52| OTP CID: 49
12:32:52| EROM CID: 49
12:32:52| EROM Color: Red
12:32:52| IMEI: 35931500xxxxxx
12:32:52| Phone ID: M600
12:32:52| Part Number: FAD-3022012-BV
12:32:52| Phone smartphone version: R1E01
12:32:52| Phone software version: CXC162037 R9F011
12:32:52| Processing Unit: CXC162098 R6A03
12:32:52| Bluetooth:
12:32:52| Organizer: CXC162071 R6A16
12:32:52| CDA: CDA162011/1 R6A13
12:32:52|
12:32:52| ... and the phone lock code is: 0000
12:32:52|
12:32:52| Ready for operation!
12:33:02| Shutting down...

12:34:05| Sendinging shutdown signal to phone...
12:34:05| Done.. You may now connect again...

12:34:05| Shutting down...
12:35:20| XS++ v3.1 (Darwin) Ready !

12:35:20| Executed on Microsoft Windows XP

12:35:30| Executing SEMC Smartphone Operations!

12:35:30| Please hold boot key ('@' or 'C') and connect device...

12:35:40| Master Port detected: COM8

12:35:40| Slave Port detected: COM9

12:35:40| Opening Port!

12:35:40| INIT MASTER...OK!

12:35:40| PHONE INFO SAMPLED...OK!

12:35:40| EPOC APPLET HEADER SENT...OK!

12:35:40| APPLET BODY SENT...OK!

12:35:40| SHUTTING DOWN MASTER...OK!

12:36:02| Error: Server not found!

12:36:04| Error: Server not found!

12:36:08| Sorry, your phone is NOT SUPPORTED

12:36:08| Sendinging shutdown signal to phone...

MAY BE MESSED UP AND NEEDS REPAIRING IF ITS POSSIBLE BUT TAKE A LOOK

So did you back up the GDFS before doing this.

Nope I have followed the following link sorry if there is no link posting ?!

Debrand your W960 / P1 for FREE (or your P990, M600, W950) - Hapless band of staff and regulars

no backup on

I just followed this quide but on step 2 instead of qutting I have done a vodafone 53% update and disconnected then XS++ flash GW1 then phone dead SEUS AND XS++ read this phone only but i cannot switch it on ?! !!!

HELP :D

well its obviously a bad flash but im not sure of your options without a backup of the gdfs.

you should always backup your gdfs no matter what anything ever says you should always do it.

so when the phones connected can you do anything with it like reflash.

I can probably reflash but I dont know what to do now so if you could tell me step by step what to do I would tell you the outcome of what you told me and whether it works but thanks for help and if u know how to do anything please give me some advice.

well i have never really had a bad flash like this and dont really know how a 53% vodafone flash would affect the firmware.

but in my opinion id reflash it but not do a vodafone update this time so just flash with the firmware you were flashing with, unless you can get it connected up to the updater and maybe update it fully and see if that helps.

hope you can get it working.

Thanks I can probably reflash but I would need a step by step instruction so I dont mess up like?

open XS++
Connect Phone
Then do what ???

He he sorry but that was my first flash and messed up

thx

You can try:

-Check you have full battery and good cables, clean ports.
-Open XS++
-Smartphone connect
-Connect your phone in flash mode.
Then, in the flash tab:
-Change CDA to generic world 1 with the latest firmware you can see there.
-Once you select it, press Run Script.
-After process ends, use SEUS to finally update firmware.

Hope it works

thanks for advice the worst thing is that when i try to charge the battery and connect it to the main plugs the phone screen and keyboard flash and switch off and this is no stop until i disconnect it from the plug and even worse cannot see how much of the battery is charged so should I just leave it flashing like that and then try your advice ????


Thanks appriciate

The problem is if you do not have charged battery, it might discharge during the process. If it is above 85%, I don't think it will discharge completely.

The one way to now if still your phone charging- charger is worm and when your battery is full charged - he is cold

Hi

thanks for all the help I have followed Willin08's thread to get it back to work but no luck the SEUS says the phones up to date after i have flashed to GW1 this really sucks and probably someone will advise me on sending it to a repair centre its all the same ?!

phone flashes and goes off non stop until you take out the battery XS++ doesnt do nothing now, SEUS says update not available IT SUCKS ! basically TOTALLY BRICKED !!!

but yh thanks to the ppl that tried to help and if anyone comes up with any other idea of how to save my phone after the stupidness I DID then feel free to do so ?

Thanks again !

the phone is not BRICKED if you can connect to computer, just either reflash it or use the sony ericsson update service again.

try to refalsh the firmware.
serch on teh inetrnet wich firmware evrsion is the best..