Printable View
Hi,
I have a w810i but it wil not turn on.I tried to flash the phone with xs++ but it says: cannot open communication port.Downloaded usb flash drivers but it don't work.Tried to flas with setool2lite but this als not work.Tried to take the battery out for some seconds but this don't work.Searched on the internet for the soulotion but I don't know what's wrong with the phone.
The computer also can not detect the phone.
Dou have any idee and now how to help me?
Thanks in advance,
Appie
what flash driver did u download?
those from the usb flash drivers thread by jasminQuote:
Originally Posted by bad_boy640
gimme the thread
same problem here with my W810i. Looking forward for answers on how to fix it. Thanks
apperantly im having the same problems with my recently purchased W350a
wanted to tamper with it and well as unbrand it so i can use music files as ringtones...
so i downloaded the update service from the Sony web and also XS++
Upon opening XS++ and following the procedure this is what it said:
16:34:48| XS++ v3.1 (Darwin) Ready !
16:34:48| Executed on Microsoft Windows XP
16:34:54|
16:34:54| Attempting to open the interface...
16:34:54|
16:34:54| TURN OFF PHONE!
16:34:54| Hold 'C' button on phone and connect phone NOW.
16:34:54| You have 30 seconds...
16:34:54|
16:35:24| Error: Cannot open phone communication port
16:35:26| Disconnected... Unplug the phone
16:35:30| Shutting down...
I've tried connecting it as the tutorial states and the outcome is always the one above..
although the pc does recognize it in file transfer mode as a removable disk so i can see whats on it...
any sugeestions?
Okay
I Am Also Use W810i
1 > Start Your XS++
Communication Settings :
Select Port : USB
Press Connect
Attempting to open the interface...
TURN OFF PHONE!
Hold 'C' button on phone and connect phone NOW.
You have 30 seconds...
2 > Turn Off Phone And Remove Battery,SIM Card & Memmory Card
After Insert Bettery Hold 'C' Button & Connect Cable (But First Install Your USB Flash Drive)
Finally
Baseband ID: 8040
Protocol Version: 3.1
Sending db2010_cid00_prodid_p3l.bin...
Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
This is a PRODUCTION_ID loader
Activating GDFS...
Phone name detected!
Profiling SEMC phone...
Platform: DB2010
OTP CID: 49
EROM CID: 49
EROM Color: Brown
IMEI: 35906xxxxxxxxx
Phone ID: W810
Region: S_ASIA_LEVAN
CDA: CDA102295/7 R2A
Firmware Version: R4ED001
EROM: n/a
Ready for operation!
you have to download gordon`s gate flash driver 1.1.....install the driver and the try again...
yes i had the same problem. install teh usb driver and it will work
Reflash the firmware found in the firmware section
haha! kieran! what are you talking about bru? they cant even connect to XS++ so how do they flash the phone?...dont be silly. Ok now back the thte topic, have a feeling you didnt install the correct drivers. note that when you plug the phone into your pc to install the driver you must turn the phine off first. and then XP will prompt you to install the drivers. if it doesnt prompt you then try this method. turn your phone off -> plug in phone -> right click my computer -> select properties -> select hardware devices -> search for your phone in the list -> double click on it -> then select update drivers and then follow the instructions windows gives you. good luck peeps. if your confused with this then PM me and ill try replay ASAP (sorry just lazy to type right now). good luck