w810 return from the dead but still not working

Hi everyone, I am new here so please bare with me...

Ever since I had my phone it has been dropping calls like crazy so I decided to debrand it after a year. I used XS++ v3.1 with W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn and W810_R4EA031_FS_EUROPE_2_RED49.fbn. Everythings fine in the beginning and then after a few days it dropped call again so I decided to do it again using W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn and W810_R4ED001_FS_AMERICA_2_RED49.fbn. Everything went wrong and my phone was dead. It would not turn on, no lights, no nothing. I left it charging for many hours althought I don't know if it is charging or not because it has no response. I tried it again today using the "EUROPE" one and things went smooth but did not finish. My phone will turn on now but only showing the SE logo and then stuck there. If only on charging it will give me a white screen.

Hope someone can help me here!!

Thanks


18:35:13| XS++ v3.1 (Darwin) Ready !
18:35:14| Executed on Microsoft Windows XP
18:35:24|
18:35:24| Attempting to open the interface...
18:35:24|
18:35:24| TURN OFF PHONE!
18:35:24| Hold 'C' button on phone and connect phone NOW.
18:35:24| You have 30 seconds...
18:35:24|
18:35:27| Baseband ID: 8040
18:35:27| Protocol Version: 3.1
18:35:27|
18:35:27| Sending db2010_cid00_prodid_p3l.bin...
18:35:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
18:35:27| This is a PRODUCTION_ID loader
18:35:27| Activating GDFS...
18:35:28| Phone name detected!
18:35:28|
18:35:28| Profiling SEMC phone...
18:35:28| Platform: DB2010
18:35:28| OTP CID: 49
18:35:28| EROM CID: 49
18:35:28| EROM Color: Red
18:35:28| IMEI: 35906300xxxxxx
18:35:28| Phone ID: W810
18:35:28| Region: EUROPE_2
18:35:28| CDA: CDA102494/4 R3A
18:35:28| Firmware Version: R4EA031
18:35:28| EROM: n/a
18:35:28| Ready for operation!
18:35:40| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:35:40| Custpack: EUROPE_1 (CDA102494/108) (W810)
18:35:40| Generic(non-branded) custpack: Yes
18:35:40| Allowed languages: en, pt, es, fr,
18:35:40| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:36:14|
18:36:14| Sending db2010_cid49red_flash_r2a003.bin...
18:36:14| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
18:36:14| This is a FLASH loader
18:36:14| Now flashing firmware main...
18:36:16| Flashing c:\cid49\main generic\w810_r4ea031_main_generic_hn_red49.mbn
18:36:16| Header type: BABE
18:36:16| 344 flashblocks
18:38:59| Finishing flash
18:38:59| Done flashing
18:38:59| Now flashing filesystem...
18:39:00| Flashing c:\cid49\fs\w810_r4ea031_fs_europe_2_red49.fbn
18:39:00| Header type: BABE
18:39:00| 161 flashblocks
18:40:16| Finishing flash
18:40:16| Done flashing
18:40:16|
18:40:16| Sending db2010_cid49red_cs_r3a010.bin...
18:40:20| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
18:40:20| This is a CHIPSELECT loader
18:40:20| Activating loader...
18:40:20| Activating GDFS...
18:41:32| This loader is UNLOCKED
18:41:32| Success! CS-loader has been unlocked!
18:41:32| Uploading customization files to phone...
18:41:32| Upload ./own_custpack/tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm to tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
18:41:32| Activating filesystem
18:41:52| Creating directory tpa
19:27:55| Error: Flashing failed
19:27:55| Disconnected... Unplug the phone
19:45:58| Shutting down...

you are doing it all wrong, you have to match custom pack with file system. if you use europe_2 fs, then use europe_2 custom pack. try again that way

Where can I download the EUROPE_2 custpack?
Is it W810_CDA102555_11_R2A_Generic_EUROPE_2 located at
Top Sony Forums > Downloads > Custom Files > w810custpack

I am planning to use
W810_R4EA031_MAIN_GENERIC_HN_RED49
W810_R4ED001_FS_EUROPE_2_RED49

you don't need to download, xs 3.1 has customization pack for europe 2, just pick it from the list when flashing phone

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

you really should read some tutorials. and it doesn't have to do anything with battery

Quote:

---

Originally Posted by tomcom

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

---

Before start flashing charge battery full ( It MUST be done if you don't want new problems during flashing )

Quote:

---

Originally Posted by tomcom

Now I have a better idea. Another question is how come I have to connect my phone, while pressing c, really really fast...ie within 1/2 second after I click connect or I'll have error. Is it because my phone is not fully charged?
Anyhow I will try it when I come back. Have to leave town for a few days.

---

You dont really have to plug in your phone while pressing c really fast within 1/2 second.

all you need to do is hold C and plug it in. Then it should be detected automatically.

Hey guys. First time flashing my phone and it's been 2 hrs and it is still saying "sending flashblock 1/344 Address=635e1d7c Size=4f8d4d15. Been following the tutorials but no luck as to what to do here. It said it should take about 6 minutes.

17:12:54| TURN OFF PHONE!
17:12:54| Hold 'C' button on phone and connect phone NOW.
17:12:54| You have 30 seconds...
17:12:54|
17:12:59| Baseband ID: 8040
17:12:59| Protocol Version: 3.1
17:12:59|
17:12:59| Sending db2010_cid00_prodid_p3l.bin...
17:12:59| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:12:59| This is a PRODUCTION_ID loader
17:12:59| Activating GDFS...
17:13:00| Phone name detected!
17:13:01|
17:13:01| Profiling SEMC phone...
17:13:01| Platform: DB2010
17:13:01| OTP CID: 49
17:13:01| EROM CID: 49
17:13:01| EROM Color: Red
17:13:01| IMEI: 35906400xxxxxx
17:13:01| Phone ID: W810
17:13:01| Region: AMERICA_1
17:13:01| CDA: CDA102295/1 R2A
17:13:01| Firmware Version: R4GC010
17:13:01| EROM: n/a
17:13:01| Ready for operation!
17:13:59|
17:14:00| Sending db2010_cid49red_flash_r2a003.bin...
17:14:00| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:14:00| This is a FLASH loader
17:14:00| Now flashing firmware main...
17:14:00| Flashing c:\users\jamore\downloads\w810_r4ek001_main_generi c_hn_red50.mbn
17:14:00| Header type: BABE
17:14:00| 344 flashblocks

@Jiggamore

Your main firmware is wrong - your phone is CID49 and you trying to flash with CID50 and you have the newest firmware so if your phone working fine you no need for flashing,but if you still want to flash find firmware CID49 (MAIN,FS and CUSTPACK)

Quote:

---

Originally Posted by djape48

you don't need to download, xs 3.1 has customization pack for europe 2, just pick it from the list when flashing phone

---

Below is the latest log showing I gave up after an hour stuck at "activatinow filesystem". I try to turn on the phone and it is now showing configuration error.

Do I need a new custpack? Or is my

23:32:49| XS++ v3.2 Dev1 (Crystal) Ready !
23:32:49| Executed on Microsoft Windows XP
23:33:24|
23:33:24| Attempting to open the interface...
23:33:24|
23:33:24| TURN OFF PHONE!
23:33:24| Hold 'C' button on phone and connect phone NOW.
23:33:24| You have 30 seconds...
23:33:24|
23:33:29| Baseband ID: 8040
23:33:29| Protocol Version: 3.1
23:33:29|
23:33:29| Sending db2010_cid00_prodid_p3l.bin...
23:33:29| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:33:29| This is a PRODUCTION_ID loader
23:33:29| Activating GDFS...
23:33:30| Phone name detected!
23:33:30|
23:33:30| Profiling SEMC phone...
23:33:30| Platform: DB2010
23:33:30| OTP CID: 49
23:33:30| EROM CID: 49
23:33:30| EROM Color: Red
23:33:30| IMEI: 35906300xxxxxx
23:33:30| Phone ID: W810
23:33:30| Region: EUROPE_2
23:33:30| CDA: CDA102494/4 R3A
23:33:30| Firmware Version: R4EA031
23:33:30| EROM: n/a
23:33:30| Ready for operation!
23:33:40| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
23:33:40| Custpack: EUROPE_1 (CDA102494/108) (W810)
23:33:40| Generic(non-branded) custpack: Yes
23:33:40| Allowed languages: en, pt, es, fr,
23:33:40| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
23:33:58| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
23:33:58| Custpack: EUROPE_2 (CDA102494/4) (W810)
23:33:58| Generic(non-branded) custpack: Yes
23:33:58| Allowed languages: en, fr, de, tr, st, zu,
23:33:58| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
23:35:28|
23:35:28| Sending db2010_cid49red_flash_r2a003.bin...
23:35:29| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
23:35:29| This is a FLASH loader
23:35:29| Now flashing firmware main...
23:35:29| Flashing c:\cid49\w810_r4ea031_main_generic_hn_red49\w810_r 4ea031_main_generic_hn_red49.mbn
23:35:29| Header type: BABE
23:35:29| 344 flashblocks
23:38:11| Finishing flash
23:38:11| Done flashing
23:38:11| Now flashing filesystem...
23:38:12| Flashing c:\cid49\w810_r4ea031_fs_europe_2_red49\w810_r4ea0 31_fs_europe_2_red49.fbn
23:38:12| Header type: BABE
23:38:12| 161 flashblocks
23:39:27| Finishing flash
23:39:28| Done flashing
23:39:28|
23:39:28| Sending db2010_cid49red_cs_r3a010.bin...
23:39:31| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
23:39:31| This is a CHIPSELECT loader
23:39:31| Activating loader...
23:39:31| Activating GDFS...
23:40:44| This loader is UNLOCKED
23:40:44| Success! CS-loader has been unlocked!
23:40:44| Uploading customization files to phone...
23:40:44| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
23:40:44| Activating filesystem
00:36:49| Error: Flashing failed
00:36:49| Disconnected... Unplug the phone
00:37:05| Shutting down...

you need to down load the hole thing that i posted and it will work a dream it has worked on my phone loads of times and i mesed it up the first couple of times mate just start from skrack each time and you will get there .

in the down loads that are posted you need se tool light and xs and you need to use setool light first then xs forlow the instructions mate

Quote:

---

Originally Posted by custom08

in the down loads that are posted you need se tool light and xs and you need to use setool light first then xs forlow the instructions mate

---

This is the VERY FIRST one I followed from another site where it worked for a day or two. I have tried it again later on and it is not working anymore.

If I don't plug in the phone within split second it will stop at...

17:05:53| XS++ v3.2 Dev1 (Crystal) Ready !
17:05:53| Executed on Microsoft Windows XP
17:06:03|
17:06:03| Attempting to open the interface...
17:06:03|
17:06:03| TURN OFF PHONE!
17:06:03| Hold 'C' button on phone and connect phone NOW.
17:06:03| You have 30 seconds...
17:06:03|
17:06:05| Baseband ID: 8040
17:06:05| Protocol Version: 3.1
17:06:05|
17:06:05| Sending db2010_cid00_prodid_p3l.bin...

Quote:

---

Originally Posted by tomcom

This is the VERY FIRST one I followed from another site where it worked for a day or two. I have tried it again and it is not working anymore.

---

Finalization of your phone didn't complete, you need to upload CUSTPACK one more time to finalize flashing

Quote:

---

Originally Posted by seamonkey

Finalization of your phone didn't complete, you need to upload CUSTPACK one more time to finalize flashing

---

Which CUSTPACK? The one included in XS++? or the one included in the one mentioned by custom08....that one I got the following error

16:27:44| Sending db2010_cid49red_flash_r2a003.bin...
16:27:44| Header: Error 0x10
16:27:44| Error: Cannot send flash loader
16:27:44| Error: Flashing failed
16:27:46| Disconnected... Unplug the phone

I am running out of options as I have tried so many things and none of them work...the problem is I am getting different errors every time and getting to the second screen is already a big problem as I have to plug in the phone within ONE second without getting stuck at the first screen.

If XS++ have EUROPE 2 for your phone - use that custpack

Post an identify log with setool2lite to see if there is something wrong with the cell phone.

This is the last successful log.

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906300397853 CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
Brand:Generic Trade
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_2
CDA article: CDA102494/4
CDA version: R3A
Default article: cxc1250324
Default version: R4EA031

Network LOCKED
Operator: 302-72

USERCODE:1613

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:2 secs.

Quote:

---

Originally Posted by seamonkey

If XS++ have EUROPE 2 for your phone - use that custpack

---

This is what I got....

20:43:43| XS++ v3.2 Dev1 (Crystal) Ready !
20:43:43| Executed on Microsoft Windows XP
20:44:26|
20:44:26| Attempting to open the interface...
20:44:26|
20:44:26| TURN OFF PHONE!
20:44:26| Hold 'C' button on phone and connect phone NOW.
20:44:26| You have 30 seconds...
20:44:26|
20:44:29| Baseband ID: 8040
20:44:29| Protocol Version: 3.1
20:44:29|
20:44:29| Sending db2010_cid00_prodid_p3l.bin...
20:44:29| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
20:44:29| This is a PRODUCTION_ID loader
20:44:29| Activating GDFS...
20:44:30| Phone name detected!
20:44:30|
20:44:30| Profiling SEMC phone...
20:44:30| Platform: DB2010
20:44:30| OTP CID: 49
20:44:30| EROM CID: 49
20:44:30| EROM Color: Red
20:44:30| IMEI: 35906300xxxxxx
20:44:30| Phone ID: W810
20:44:30| Region: EUROPE_2
20:44:30| CDA: CDA102494/4 R3A
20:44:30| Firmware Version: R4EA031
20:44:30| EROM: n/a
20:44:30| Ready for operation!
20:44:54| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
20:44:54| Custpack: EUROPE_1 (CDA102494/108) (W810)
20:44:54| Generic(non-branded) custpack: Yes
20:44:54| Allowed languages: en, pt, es, fr,
20:44:54| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
20:45:01| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
20:45:01| Custpack: EUROPE_2 (CDA102494/4) (W810)
20:45:01| Generic(non-branded) custpack: Yes
20:45:01| Allowed languages: en, fr, de, tr, st, zu,
20:45:01| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
20:45:15|
20:45:15| Sending db2010_cid49red_flash_r2a003.bin...
20:45:15| Header: Error 0x10
20:45:15| Error: Cannot send flash loader
20:45:15| Error: Flashing failed
20:45:17| Disconnected... Unplug the phone
20:45:45| Shutting down...

and when I tried again I got this error.....

20:55:34| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
20:55:34| Custpack: EUROPE_2 (CDA102494/4) (W810)
20:55:34| Generic(non-branded) custpack: Yes
20:55:34| Allowed languages: en, fr, de, tr, st, zu,
20:55:34| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
20:55:36| Sorry, your phone is NOT SUPPORTED
20:55:36| Error: Cannot send flash loader
20:55:36| Error: Flashing failed
20:55:38| Disconnected... Unplug the phone

Why am I getting different error every time??

Does anyone here able to help? I have probably tried over 100 times by now and only able to get to the second screen 1/5 of the time.

You dont really have to plug in your phone while pressing c really fast within 1/2 second.

all you need to do is hold C and plug it in. Then it should be detected automatically.

Try to do full flash with Setool2lite instead XS++ (MAIN,FS & CUSTPACK) . Maybe that should work.

wrong CID. beware that sometimes brute forcing does take long. good luck

Quote:

---

Originally Posted by yyhq1001

You dont really have to plug in your phone while pressing c really fast within 1/2 second.

all you need to do is hold C and plug it in. Then it should be detected automatically.

---

If I take my time, there is always an error.

Quote:

---

Originally Posted by chingy

wrong CID. beware that sometimes brute forcing does take long. good luck

---

Do you mean "Sending db2010_cid00_prodid_p3l.bin..." and how to fix it.

The others are all CID49.

Quote:

---

Originally Posted by seamonkey

Try to do full flash with Setool2lite instead XS++ (MAIN,FS & CUSTPACK) . Maybe that should work.

---

I have tried that already.

I have the same problem (((

so i used another pc to flash my phone and this time it finished flashing.....what can i say?...however my phone is showing "configuration error". i am charging it now, first it gave a white screen with the red led at the top of my phone blinking, then it shows the battery charging screen and then after a while eveything went out except all the key buttons.

Please let me know if you see something wrong in the log....thanks

19:26:39| XS++ v3.2 Dev1 (Crystal) Ready !
19:26:39| Executed on Microsoft Windows XP
19:26:51|
19:26:51| Attempting to open the interface...
19:26:51|
19:26:51| TURN OFF PHONE!
19:26:51| Hold 'C' button on phone and connect phone NOW.
19:26:51| You have 30 seconds...
19:26:51|
19:26:55| Baseband ID: 8040
19:26:55| Protocol Version: 3.1
19:26:55|
19:26:55| Sending db2010_cid00_prodid_p3l.bin...
19:26:55| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
19:26:55| This is a PRODUCTION_ID loader
19:26:55| Activating GDFS...
19:26:56| Phone name detected!
19:26:56|
19:26:56| Profiling SEMC phone...
19:26:56| Platform: DB2010
19:26:56| OTP CID: 49
19:26:56| EROM CID: 49
19:26:56| EROM Color: Red
19:26:56| IMEI: 35906300xxxxxx
19:26:56| Phone ID: W810
19:26:56| Region: EUROPE_2
19:26:56| CDA: CDA102494/4 R3A
19:26:56| Firmware Version: R4EA031
19:26:56| EROM: n/a
19:26:56| Ready for operation!
19:27:00| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
19:27:00| Custpack: EUROPE_1 (CDA102494/108) (W810)
19:27:00| Generic(non-branded) custpack: Yes
19:27:00| Allowed languages: en, pt, es, fr,
19:27:00| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
19:27:03| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
19:27:03| Custpack: EUROPE_2 (CDA102494/2) (W810)
19:27:03| Generic(non-branded) custpack: Yes
19:27:03| Allowed languages: en, fr, de, tr, st, zu,
19:27:03| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
19:27:05|
19:27:05| Sending db2010_cid49red_cs_r3a010.bin...
19:27:07| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
19:27:07| This is a CHIPSELECT loader
19:27:07| Activating loader...
19:27:07| Activating GDFS...
19:28:14| This loader is UNLOCKED
19:28:14| Success! CS-loader has been unlocked!
19:28:14| Uploading customization files to phone...
19:28:14| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
19:28:14| Activating filesystem
19:28:24| Creating directory /tpa
19:28:24| Creating directory /tpa/preset
19:28:24| Creating directory /tpa/preset/custom
19:28:24| Deleting file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
19:28:24| Deleted...OK!
19:28:24| Uploading file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
19:28:24| Done uploading
19:28:24| Uploading /tpa/preset/custom/FM_PICTURES_HOOK_3.itm...
19:28:24| Creating directory /tpa
19:28:24| Creating directory /tpa/preset
19:28:24| Creating directory /tpa/preset/custom
19:28:24| Deleting file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
19:28:24| Deleted...OK!
19:28:24| Uploading file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
19:28:24| Done uploading
19:28:24| Uploading /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm...
19:28:24| Creating directory /tpa
19:28:25| Creating directory /tpa/preset
19:28:25| Creating directory /tpa/preset/custom
19:28:25| Deleting file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
19:28:25| Deleted...OK!
19:28:25| Uploading file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
19:28:25| Done uploading
19:28:25| Uploading /tpa/preset/custom/FM_THEMES_HOOK_3.itm...
19:28:25| Creating directory /tpa
19:28:25| Creating directory /tpa/preset
19:28:25| Creating directory /tpa/preset/custom
19:28:25| Deleting file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
19:28:25| Deleted...OK!
19:28:25| Uploading file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
19:28:25| Done uploading
19:28:25| Uploading /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm...
19:28:25| Creating directory /tpa
19:28:25| Creating directory /tpa/preset
19:28:25| Creating directory /tpa/preset/custom
19:28:25| Deleting file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
19:28:25| Deleted...OK!
19:28:25| Uploading file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
19:28:25| Done uploading
19:28:25| Uploading /tpa/preset/custom/GAMES_HOOK_3.itm...
19:28:25| Creating directory /tpa
19:28:25| Creating directory /tpa/preset
19:28:25| Creating directory /tpa/preset/custom
19:28:25| Deleting file /tpa/preset/custom/GAMES_HOOK_3.itm
19:28:26| Deleted...OK!
19:28:26| Uploading file /tpa/preset/custom/GAMES_HOOK_3.itm
19:28:26| Done uploading
19:28:26| Uploading /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm...
19:28:26| Creating directory /tpa
19:28:26| Creating directory /tpa/preset
19:28:26| Creating directory /tpa/preset/custom
19:28:26| Deleting file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
19:28:26| Deleted...OK!
19:28:26| Uploading file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
19:28:26| Done uploading
19:28:26| Uploading /tpa/preset/custom/customize.xml...
19:28:26| Creating directory /tpa
19:28:26| Creating directory /tpa/preset
19:28:26| Creating directory /tpa/preset/custom
19:28:26| Deleting file /tpa/preset/custom/customize.xml
19:28:26| Deleted...OK!
19:28:26| Uploading file /tpa/preset/custom/customize.xml
19:28:26| Done uploading
19:28:26| Uploading /files_to_upload to phone...
19:28:26| Sending shutdown command to phone...
19:28:26| Customizing was SUCCESSFUL!
19:28:26| Disconnecting phone...
19:28:26| You may now unplug your phone.
19:28:26| Flashing was successful
19:28:29| Disconnected... Unplug the phone
19:45:10| Shutting down...

i have the same problem -.-'