You will all hate me for This?

Hi! There i know i should have read the tutorials before doing anything, and that is exactly what i did i followed all the tutorials to sim unlock my W810i but when i created and applied the unlock patch to my phone using the Setool2 and simlockpatchgenerator the phone is locked or bricked. Before doing anything i also created a backup of my phone using XS++.
NOW THIS MESSAGE IS APPEARING ON MY PHONE WHEN I TURN IT ON

"Configuration error. Please contact your network
operator or service center."


I cannot contact them because i recently changed my phone service.
Your help is greatly appreciated thanks again for helping out a kid.

P.S. i need the phone before next Wednesday because i'm off to college.

If you do a search here (or on the net), you'll find that the error shows up because you did not flash a Customization Pack (custpack).

Pick a proper customization pack and flash it.

remember you need to check if the pack has the language you need, or want, whatever the case might be.

later

You must finalize your phone:

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

Nice day

As above users have said, you need to finalize phone by flashing appropriate cust pack.
Please thank those inviduals if their advice helped.

And yes, we hate you! Hehe j/k :p

You need to finalize your phone. Try this tutorial

Thanks again for replying everyone. Can someone give me directions to download the file pack from the download sections the phone is cingular in USA i can't check the CID anymore cause its not connecting to XS++ ot the stelltool.

The custpack is the same for CID 49 or 50. You need to use the custpack according with the FS you flashed:for example, if you used W810_R4ED001_FS_AMERICA_1_RED49 , you must flash W810_CDA102555_106_R2A_Generic_AMERICA_1 , if you used W810_R4ED001_FS_EUROPE_1_RED49, you must flash W810_CDA102555_10_R2A_Generic_EUROPE_1

the phone is not connecting to any of the tools by holding C and connecting the cable how do i upload the custom pack on the phone now.

Change usb ports and then tried to connect.

Nice day

Quote:

---

Originally Posted by abidin786

the phone is not connecting to any of the tools by holding C and connecting the cable how do i upload the custom pack on the phone now.

---

Try to change usb portand hold 2 and 5 instead of "c"

if its unwilling to connect to computer then its probably is bricked and need to requires to fully flash it (the unlocking man told me this) to do that you need something like the service cable (note thats not the data cable) to revive the phone.
However since it turns on, that may not be the case.
If your ever able to connect to computer you can recover the phone by updating it using the sony ericsson update service (downloaded for free on their website) its meant to fix bad flashing .etc if your totally out of luck.

thanks for the help guys sorry school started and have not had a chance to reply back will try to hold 2 or 5 to connect and change usb ports also will reply back soon after trying thanks for all the help.:)

please keep you phone as it is for now, and study the gude how to flash provided by top sony and then procced! Back up gdfs file from your phone and keep it safe.

i have had same problem.
1. disconnect battry for 10 sec
2. insert battry
3. start xs++
4. connect
5. insert usb cable pressing c
6. update firmwire
7. disconnect cable
8. connect as above
9.flsh fs file
10 disconnect
11. start far manage
12 connect then update coustem pack
then mbn file hop this works