Tutorial on how to apply patches by using farmanager with jdflasher plug-in (db2020)

It's useful for applying patches (over 50000 lines)

First download far and jdflasher then copy jdflasher in far plug-in folder

STEP 1

1. Download a copy of your Main
2. Place that Main in Far\Plugins\jdflaser\2020_52
3. Drag the main into qamake.exe (I think)
4. Let it finish. It shouldn't take more than a few seconds.
5. Open Far Manager, press Alt-F1 and select "just da flasher"
6. Select as phone "db2020", maximum speed and click "jump down into a large rabbit hole"
7. As soon as it connected select "bflash"
8. You will need to reinsert the battery 3 times (it will tell you when to do that). Don't leave your computer.
9. As soon as it finishes, it will tell you to reflash your Main. We're going to do that now.
10. In the right pane navigate to Far\Plugins\jdflasher\2020_52
11. Select your main (make sure you select the .mbn file and not the .vkp file!) and click copy. In the 1st dialog don't change anything, just click copy. In the 2nd dialog make sure "flash babe image" (the 1st option) is selected and click flash.
12. After flashing is done, select the VKP patch that is in Far\Plugins\jdflasher\2020_52 and press copy. Don't change anything on the 1st dialog again. On the 2nd dialog make sure that "Process vkp patch" is selected and click "flash". It should take a few seconds.
13. Now you can apply any patch you want! smile.gif smile.gif
14. After you finish, make sure you click the 3 dots ("...") and select "yes"

Next time you want to patch your phone, you won't have to do the same things again! Before connecting your phone, select "qa2020" instead of "db2020" as your phone model. Then click bflash and jump to step 2

step 2: Applying Patches!

Start FAR Manager, press Alt+F1, select “just da flasher“. On the dialog select qa2020 as script (DCU-60 and 921600), click “jump down into a large rabbit-hole“. Connect the phone, holding C button. Select bflash and press Enter. On the right panel, navigate to the patch file(s) you want to write into the firmware. Select a vkp patch, press F5, press Enter on the first dialog, don’t change anything; and on the second, select “as vkp patch“, click “yeah, flash it“.
If u want to delete patch so mark remove patch.


You can flash several vkp patches in one go, without quitting the program. Now if you’re done, flashed everything you wanted, just select “..” on the left panel and hit Enter. On the dialog click yes.

if it’s useful for u please click thanks

Help plz, i have a se k810i and i tried to follow your guide but my MAIN isn't a .mbn file it's a .FBN, so qamaker won't work. i tried to flash it with another MAIn that is a .mbn but i didn't work. what shall i do? thanks in advance!

your main should end with .mbn, .fbn is the file system

step 1..no.7. As soon as it connected select "bflash"..
there no bflash if i connect using script db2020..only have oflash and ofs..so how?

same problem: i have only "oflash" and "ofs"

please help us dude :(

Quote:

---

Originally Posted by eligator

step 1..no.7. As soon as it connected select "bflash"..
there no bflash if i connect using script db2020..only have oflash and ofs..so how?

---

u should not use "db2020" in far manager... u should choose "qa2020" =) then u will see bflash :)

Quote:

---

Originally Posted by Shankay

same problem: i have only "oflash" and "ofs"

please help us dude :(

---

use "qa2020" dont "db2020" in far manager, then u see bflash =)

i have a k530i flashed to w660i cid 53.. and i follow all these steps when im gonna apply a patch.. but when im starting bflash, it says error ?? i dunno what 2 do ? :O any one knows ? :(

thxx

you huys are just not reading it

qa2020 is using the quick access patch

db2020 on it is the part where you add the quick accsess patch

if this is confusing you use setool lite 2 to add quick accses patch then come back to this and select qa2020

http://i522.photobucket.com/albums/w...ks/errrrrr.jpg

i have this problem when i tried to flash using an jdflasher..

i cant connect my phone..

may be you didn't install the SEMC flash driver or your battery is out and make sure to press and hold c while connecting

Quote:

---

Originally Posted by sinoda

http://i522.photobucket.com/albums/w...ks/errrrrr.jpg

i have this problem when i tried to flash using an jdflasher..

i cant connect my phone..

---

Your file qa2020 it is wrong. The correct file it is in the "anycid" pack.

But.....i have so a big problem without solution.
Attachment 7679:mad:

Quote:

---

Originally Posted by sinoda

http://i522.photobucket.com/albums/w...ks/errrrrr.jpg

i have this problem when i tried to flash using an jdflasher..

i cant connect my phone..

---

i have got the same problem

Its very useful thanks !

Quote:

---

Originally Posted by apostuvio

But.....i have so a big problem without solution.
Attachment 7679:mad:

---

Have you tryed to download FarManager from another link?

respect, and aspect

at step no.5, after i click jd flasher, nothing happen. far manager quit suddenly...why is that so?

can i follow the instructions to paych k770i cid53 with an unlock patch vkp that i have

do i just have to follow the instructions so it installs the quick access patch?

Hy all!! :a012