DEAD!!! CID53 w580i... need help??

well my w580 just went dead,blinking red light when I power it on.I tried repairing the EROM using XS++,setool, KulanKendi and Wotan but none of them support CID53 erom upgrade yet :( so anyone have any more ideas abt what I can do?? Thnx.

CID53 EROM or GDFS repair not supported yet. No way. Sorry

For now only solution - service

D unlocker which top sony are offical re sellers also offers Security fix on cid 53 phones.

Regards

Lavondys

Find someone who has dream box se. It will solve your problem.

your GDFS is damaged if you have backup restore it

Lavondys, I downloaded d-unlocker clinet and connect my phone, I get the following log below.btw, my phone doesnt boot with C so i connected it using 2+5. What does these errors mean? do I need to buy logs and if yes how nuch? thanks a lot for your help.

Code:

---

  01:37:26  D-Unlocker v2.12 by Cruiser Team
  01:37:26  Initializing...
! 01:37:26  1. Please see the documentation first (a PDF installed with the application)
! 01:37:26  2. Make sure the appropriate phone modem drivers are installed
! 01:37:26  3. Fill in the connection settings under settings tab
! 01:37:26  4. Turn the phone ON
! 01:37:26  5. Connect the phone…
  01:37:36  Connecting via Generic EMP USB Flash Device (USB4)…
  01:37:36  Device driver version: 2.0.0.4
  01:37:36  Device driver date: 9-12-2007
  01:37:36  Starting communication...
  01:37:37  Connecting to the baseband CPU...
  01:37:37  Entering baseband CPU service mode...
  01:37:37  Detected chipset: DB2020
  01:37:37  Boot mode: ROM
E 01:37:37  Error: 0x4D5EFC5D
E 01:37:37  Error: 0x8E9915E3
E 01:37:37  Error data: 0x8E9915E3 - 00000003:003601
E 01:37:37  Error: 0xBB448E91
E 01:37:37  Error: 0xE308DE3A
E 01:37:37  Error: 0x8C9DFBEC
E 01:37:37  Error: 0x9FFF4777
E 01:37:37  Error: 0x28FF3CA4
E 01:37:37  Failed!
! 01:37:37  Please disconnect battery and cable from the phone!
! 01:37:37  To report errors right-click this window

---

ask customer follow instructions in log
ask him connect phone powered on without sim card at the start

not by C or not by 2 & 5

well, my phone DOES NOT power on and that is the main problem.
anyway, i did read the instructions and it said in Recovery Mode connect phone using C.
But, my phone does not boot with C (I get a single red light blink) and so I tried with 2+5. So, any suggestions on how to make it work???

For my phone when it blinks red light it means the battery is dead. Have you tried charging it?

Maybe try Far+JDflasher

yeah, if you have the firmware JDFlasher will work.

I have the exact same problem,I have a w580 and when I try to turn it on the red light at the site would just blink,I tried charging it but the red light would just come on an there would be no indication of charging.When I connect it to the pc and hold c the pc does not detect it so programs like seus an se tool does not find it.I have not tried connecting it to jd flasher an phone xs++ as yet.I have seen that the other member connected his phone using 2+5 could someone explain to me how to do that,and help me with my problem.

well my phone does not boot with C and so Far+Jdflasher cant detect it.
I tried with connecting with 2+5 and I get an error message :(

EDIT:
@cool3ni
just connect your phone using 2+5 instead of C (that is the recovery boot mode, used to update erom for your phone)

I tried booting it with 2+5 and the pc finally detected it,this is what I got

Code:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100489266 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:88 secs.

---