Printable View
i been playing about trying flash my phone and iv done the bit ware you plug it in and hold the c button !
But now it get a red flashing light at the power botton and i cant do the hold c button thing so i cant get it to work with the program??
any ides whats up?
your battery is charged?
oh
if u sure ur battery phone is full it seem it has erom problem.
use 2+5 instead of c
Hi thanks i did an identify check and i got this
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3524***********CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35536301385133
Model:W850i
Brand:Sony Ericsson
MAPP CXC article: R1JG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1JG001
Language Package:EUROPE_1
CDA article: CDA102568/10
CDA version: R5A
Default article: cxc1250489
Default version: R1JG001
Operator: 000-00
Elapsed:11 secs.
it say somethink about the ieei missmatch??? i think i mite of used the wroung gdfs files!
dam i wish i can get my phone back! please some1 help me
Must use Setool.Quote:
Originally Posted by Gary_w850i
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main ( W850_R1KG001_MAIN_GENERIC_CY_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
Quote:
Originally Posted by senter
Hi i just tryed this and got
12:07:42| Did not receive 0x5a. Continuing
but it dont seem to continuing?
Reinsert battery.Quote:
Originally Posted by Gary_w850i
Reinsert battery?? you mean take it out and put it back in??
Iv done what it says and keep getting the
| Did not receive 0x5a. Continuing (iv tried removeing the battery and putting it back in at this stage too)
Why the f*** did you flash GDFS to the phone??
IMEI MISMATCH ! GDFS IMEI:35536301385133
If you do not have sec units/GDFS backup then there is not more you can do...
1. Change flash IC and do empty fill procedure
2. Repair with testpoint using SETool v. 037 (Not the lite version), besides it requires additional hardware before you can perform this
wbr
Because i dont have a clue what im doing hence why im asking for help!Quote:
Originally Posted by Ratata82
i have backup my gdfs but i cant do the hold c button to get in to it , i use the 2+5 that works
Yes, remove battery and insert back to phone!Quote:
Originally Posted by Gary_w850i
If you have originally GDFS backup then just put it under misc in SETool, write GDFS and connect phone using 2+5...
Thanks i did that! but now my i dont get any redlights in the power button , and when i put it on charge the power button stays red?Quote:
Originally Posted by Ratata82
Edit it did but now its not lighting up???
i can still connect it thur setool lite thur holding 2+5??
is there anythink i can do to get my phone back!!! please please please help
after flashing witch i belive are my own gdfs i do this and get
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101118842 CERT:N/A
FLASH CID:52 COLOR:RED
Model:W850i
Brand:Orange
MAPP CXC article: R1JC002 prgCXC1250202_ORANGE_CY
MAPP CXC version: R1JC002
Language Package:ORANGE_GEN
CDA article: CDA102677/36
CDA version: R10A
Default article: cxc1250489
Default version: R1JC002
Operator: 234-33
Elapsed:8 secs.
the phone comes on or not? well they don't say there's a mismatch any more, try doing a full flash. if not you may need to flash an erom to your phone :)
Doesnt turn on now! and no red light in the on button!Quote:
Originally Posted by Ciggy
i will have to read up on erom
EROM is not upgradeable on CID52...
try to flash the phone...
try take out your battery and leave it out for 2minutes and then put it back in. you must hold "c" before you turn the phone on. also, my w850i also use to do that, but it was fine after i restarted the pc and reinstalled SE tool. Oh and remember to open SE tool before you plug in the phone. good luck
Quote:
Originally Posted by chingy
Why does he need to hold in "c" before turning on the phone?? I work as a S//E Nokia technician/unlocker and have never hered that before...
holding the c befor turing on does not work!!
Please any other advice to get my phone working?or is it dead?
i got this now!
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101118842 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:6 secs.
im trying to white my old gdfs but when i click that button i get
file can't be found or opened
Elapsed:0 secs.
What a strike of luck!!! its working now!!!!!! oppss now i got two w850s lol one for testing and one for main i sopose