W580 Vibra and Dies...HELP ASAP plz unkown problem??

i was patching w580 r8ba024 generic with remove sp lock patch and remove message when silent is turned on ... everything seemed to go normal .
now i try to turn on my phone and it just vibrates once and does nothing.
im not sure what would be the problem.. erom ?? or filesystem?? Main??
also no led blink trying to turn on phone etc ... tried plugging it into charger same ... left the batter out overnight same result ...

is there anywhere EROM i could download for this w580 r8ba024

please any help on what to do or how to fix this asap would be appreciated
(it's my friend's w580) lol so ASAP

LOG XS++

04:37:52| XS++ v3.1 (Darwin) Ready !

04:37:52| Executed on Microsoft Windows XP

04:39:51|

04:39:51| Attempting to open the interface...

04:39:51|

04:39:51| TURN OFF PHONE!

04:39:51| Hold 'C' button on phone and connect phone NOW.

04:39:52| You have 30 seconds...

04:39:52|

04:39:58| Baseband ID: 9900

04:39:58| Protocol Version: 3.1

04:39:58| Phone name detected!

04:39:58|

04:39:59| Profiling SEMC phone...

04:39:59| Platform: DB2020

04:39:59| OTP CID: 51

04:39:59| EROM CID: 52

04:39:59| EROM Color: Red

04:39:59| IMEI: 35714301xxxxxx

04:39:59| Phone ID: W580

04:39:59| Region: AMERICA_2

04:39:59| CDA: CDA102774/20 R1A

04:39:59| Firmware Version: R8BA024

04:39:59| EROM: R3A022

04:40:00| Ready for operation!





LOG SETOOL 2 LITE

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714xxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Generic Trade
MAPP CXC article: R8BA024 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BA024
Language Package:AMERICA_2
CDA article: CDA102774/20
CDA version: R1A
Default article: cxc1123364
Default version: R8BA024

Network LOCKED
Operator: MULTIPLE

Elapsed:16 secs.

Anyone know what could be the problem ?? also if i would haave to flash over main and fs and custpack ........ how would i know if the battery is being charged or not ??? when i press power button phone just vibrates and stays off no led blink nothing ..... should i just leave it plugged in for d day may charge to full and then flash ????

what software did you use??

Did it say mismatch at the time of application

i used SETOOL 2 LITE v1.11
to do the patching

no it didnt say anything like that ... it just went normal like all other patches i did before and worked .... up untill those 2 last to patches i added and now it just vibrates like it will when now turning on but nothing happens ...

actualy that symptom (vibration when power on and nothing else ) is because GDFS fault.

i mess that SEtool lite can do that also,so try this: How to Repair a db2020 GDFS - Top Sony Forums

ohhhhh thanks kool question though .....
well on a next forum depeha said it looks like .... MAIN and FS problem
thingg is if i flash over main and fs does that change or update the GDFS ???

update gdfs

flash with main, fs, and custom

Should fix your problems, but wont stop patches from doing the same again

if phone does not respond to when i plug in the charger or turn on ....
how would i kno if the battery is charged enough for flashing ???

meh i performed a full flash on my K800i once. it had only 11% battery power. since the screen and light and stuff is not on it doesn't need much power.

and btw the phone is dead know so you can't do anything wrong right ;)

ohk so should reflash MAIN and FS

but
checked battery again with multimeter after leaving it plugged into the charger for hour still reads 1 ma ......

true wont charge without running firmware how else would i be able to charge it ??? other people is not an option really lol .....

IF i enabled usb charging in secret menu (service menu)....
shouldnt the power from the usb keep the phone running while Flashing process...??

hmm ok, all SE battery's are around 950mAh. and this will never change. you will have to check the volts lol

yes it's true you can't charge a a phone with no/damaged firmware

i don't know if the phone will charge during a flash. but i do know that the settings don't change when you reflash the phone so if "usb charge" was on before you began flashing it should still be on

if its dead then you wont lose!!

Makes a nice paper weight if its defunct anyway

yeah i allready told him that :p he's probally trying know

its not DEADDDDDDDDDDDDDDDDDDDDD

it still vibrates when i press power so ....technically it aint dead yet :P
haha true make a rel nice paper wieght u could clip d paper in the slider n all lols steups

lol im gona use another phone battery and flash it
see how that goes say what ??ohwell

OK So if i uderstand this correctly
when i flash MAIN , FS and CUSTPACK over

MY GDFS would still be the same ??? or does it get changed/updated?? when new firmware is flashed


IF SO(that it doesnt change)... I have my GDFS from when i was on R6BC002 would it be ohk to flash it over on my firmware R8BA024 ????


i heard that the gdfs doesnt chnage or update when flash to new firmware so was just wondering if i cud jus flash back original GDFS but from previous firmware

I have one W580 that also only vibration when pressing the power button. The problem with this phone is because I flashed the GDFS from another phone to it. I think the GDFS is now corrupt. I heard Dream box Se can repair damage GDFS. Try restoring the original GDFS with Setool if other programs will not connect to the phone. Hold the 2+5 button when connecting with setool.

thanks well phone connects normal to other programs
well only two that using rite now ... xs++ and setool2lite with holding c button
will try but my battery is dead ..... and cant charge since the firmware phone isnt running
im gona use another se phone battery rated d same 950 ma 3.6v so it should work
the only thing that phone is diff model so i gona have to run some wires lol :P

------------------------------------------------------------------------

Late Reply now getting time tp put results

w580 is working again!!!!!! :)

hmmm well i ran wires from my k510 battery to my w580 terminals and worked and flashed it with that battery
since w580 battery couldnt charge so yeah

although k510 battery rated 750 ma 3.6v

and w580 battery rated 930 ma 3.6v



wierd thing now is that i get this message whenever i put it to charge

"Charging non-standard Battery"
it still charges but takes exceptionally long for it to charge up fully well around 90 %

but if t depends that i flashed it with k510 battery and now using normal batery that it gives me error im thinkin since k510 is 750 ma it must of been loaded onto the firmware on charge settings for that battery ....

and now i put back orginal w580 950 ma battery phone takes longer to charge it etc since it had settings for k510 battery charging????

anybody understand that ??? lol
sorry went off topic
hmm guess just reflash MAIN FS over again
but with my w580 batttery since its working now


----------------------------------------------------------------------

tried reflashing ...MAIN but still same battery probelm when charging ...charging non standard battery ..... and takes a hole day to fully charge

thinking it migh just be the battery thats givin problems now ?

did you try full reflash? main, FS and cust pack?

it could be possible that it loaded the K510 battery. cause the battery have a little eprom inside with the info about the battery. thats why there are 3 conectors instead of 2, 1 is to read the battery's info.