Printable View
Hello everyone.
Please help me.
I used seatoollite to flash my k610 and unlock simlock, but poorly for me the flash went wrong and now i can not turn the phone on. Still detected by Xs++ or Seatoollite.
What i can do ....?
I will post the log if needed.
Help please............................................ .......
:eek::eek::eek::eek::eek::eek::eek::eek::eek:
Use XS++ v 3.1 and flash K610 Main & FS ( and CDA = custom file for your region ).Quote:
Originally Posted by kissnguyen
Thanks for the reply and i did as you advice but still unable to turn on the phone.Quote:
Originally Posted by senter
What would i do more? here is the log file:
21:34:24| XS++ v3.1 (Darwin) Ready !
21:34:24| Executed on Microsoft Windows XP
21:34:31|
21:34:31| Attempting to open the interface...
21:34:31|
21:34:31| TURN OFF PHONE!
21:34:31| Hold 'C' button on phone and connect phone NOW.
21:34:31| You have 30 seconds...
21:34:31|
21:34:36| Baseband ID: 9900
21:34:36| Protocol Version: 3.1
21:34:36| Phone name detected!
21:34:36|
21:34:36| Profiling SEMC phone...
21:34:36| Platform: DB2020
21:34:36| OTP CID: 49
21:34:36| EROM CID: 52
21:34:36| EROM Color: Red
21:34:36| IMEI: 35171001xxxxxx
21:34:36| Phone ID: K610
21:34:36| Region: EUROPE_4
21:34:36| CDA: CDA102497/6 R3A
21:34:36| Firmware Version: R1JG001
21:34:36| EROM: R3A016
21:34:36| Ready for operation!
21:36:22|
21:36:22| Sending db2020_cid01_prodid_p3j.bin...
21:36:22| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
21:36:22| This is a PRODUCTION_ID loader
21:36:22|
21:36:22| Sending db2020_mem_patcher_cid52_r2a006.bin...
21:36:22| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
21:36:22| This is a MEM_PATCHER loader
21:36:22|
21:36:22| Sending db2020_cid52red_flash_r2a005.bin...
21:36:23| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
21:36:23| This is a FLASH loader
21:36:23| Now flashing firmware main...
21:36:23| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn
21:36:23| Header type: BABE
21:36:23| 117 flashblocks
21:37:20| Finishing flash
21:37:20| Done flashing
21:37:20| Flashing was successful
21:37:22| Disconnected... Unplug the phone
:confused::confused::confused::confused::confused:
You wrong!Quote:
Originally Posted by kissnguyen
You flash Main Firmware with File System (*.fbn) ??? - this is big mistake.
Must flash Main with *.mbn file !!!
File System with *.fbn file!
See here screenshots:
http://img263.imageshack.us/img263/9...080origpw0.jpg
http://img135.imageshack.us/img135/1...033origzh0.jpg
Ok Thanks again for your reply but where i can get the mbn file?
From Download section.Quote:
Originally Posted by kissnguyen
Ok thanks alot for helping me out .
Im flashing it now and i will ask you for more intructions if something goes wrong.
Big Thanks from finland.
Ok now just finished flashing main but still unable to turn on here is the log file please help me out:Quote:
Originally Posted by senter
22:35:15| Hold 'C' button on phone and connect phone NOW.
22:35:15| You have 30 seconds...
22:35:15|
22:35:15| Baseband ID: 9900
22:35:15| Protocol Version: 3.1
22:35:15| Phone name detected!
22:35:15|
22:35:15| Profiling SEMC phone...
22:35:15| Platform: DB2020
22:35:15| OTP CID: 49
22:35:15| EROM CID: 52
22:35:15| EROM Color: Red
22:35:15| IMEI: 35171001xxxxxx
22:35:15| Phone ID: K610
22:35:15| Region: EUROPE_4
22:35:15| CDA: CDA102497/6 R3A
22:35:15| Firmware Version: R1JG001
22:35:15| EROM: R3A016
22:35:15| Ready for operation!
22:35:20|
22:35:20| Sending db2020_cid01_prodid_p3j.bin...
22:35:20| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
22:35:20| This is a PRODUCTION_ID loader
22:35:20|
22:35:20| Sending db2020_mem_patcher_cid52_r2a006.bin...
22:35:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
22:35:21| This is a MEM_PATCHER loader
22:35:21|
22:35:21| Sending db2020_cid52red_flash_r2a005.bin...
22:35:21| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
22:35:21| This is a FLASH loader
22:35:21| Now flashing firmware main...
22:35:21| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn
22:35:21| Header type: BABE
22:35:21| 460 flashblocks
22:39:11| Finishing flash
22:39:11| Done flashing
22:39:11| Flashing was successful
22:39:13| Disconnected... Unplug the phone
Hi Again .
I restore the CDA and GDFS from backup but still unable to turn on the phone.
Any idea?
Thanks
u need to flash the fs files as well
Hi Yes I did but still no luck.
Thanks
how much charge is in ur battry and can u post a new log up from se tool light v1.11