[SOLVED] HELP! W350 can not turn on after firmware upgrade

Please help. I followed Flashing with jdflasher to upgrade my W350a (AT&T) and got an error:

log started. plugin compiled Jan 3 2008 / 13:54:44
create session object
used script: pnx5230.xml
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: D000
cid detect
<- cid=53 color=red platform=pnx5230
qhldr: 071213 1552 R2A022_PNX5230_FLASHLOADER.5230_53_RED
<- hello: 071213 1552 PERCXC1720441_R2A022_PNX5230_FLASHLOADER
activateloader
flashID: 897E (Manufacturer: Intel)
<- OTP: status 0 locked 1 cid 52 cert 1 IMEI 35623702xxxxxx
flashing babe: W350_R11CA002_MAIN_TAIWAN_JH_RED53.mbn
flashing 480 blocks
error: PutFiles(putfile(putfile_flash(flashbabe(get89data (IOusb::getblock(time exceed))))))
flashing babe: W350_R11CA002_MAIN_TAIWAN_JH_RED53.mbn
error: PutFiles(putfile(putfile_flash(flashbabe(header(se nd89data(IOusb::sendblock(IOusb::dcu_WriteData(tim e exceed))))))))
error: SetDirectory(setdir(cmd14(send89data(IOusb::sendbl ock(IOusb::dcu_WriteData(time exceed))))))

Now, I can't even turn on the phone. Please Help!!!

Find small program "babeck0.8" and check your .mbn file,maybe is corrupted.You can find that program here in download section - sofware

Quote:

---

Originally Posted by seamonkey

Find small program "babeck0.8" and check your .mbn file,maybe is corrupted.You can find that program here in download section - sofware

---

The following is the result:

babecheck [sswcheck] v0.8 by den_po

loading W350_R11CA002_MAIN_TAIWAN_JH_RED53.mbn... ok
pnx5230 cid 53 red
full hash
number of blocks: 480 (0x1E0)
1st block addr: 0x20100000
1st block size: 0x10000
ok

What should I do?

did u make a back up ? and did u flash it with a full battry

Quote:

---

Originally Posted by philzfog12

did u make a back up ? and did u flash it with a full battry

---

I didn't make a backup. I did flash it with full battery.

Right now, my phone can't turn on. Also, nothing happen when connected to PC, and even connected to power adapter. HELP ME!!!

do u have a other battry spare and se tool (just to see if it still can be ident i know u carnt use it to flash cid 53)

Quote:

---

Originally Posted by philzfog12

do u have a other battry spare and se tool (just to see if it still can be ident i know u carnt use it to flash cid 53)

---

No spare battery. By the way, I think it should be worked when I cannected it to the power adapter even without a battery inside, but it didn't.

right if u have se tool lite con it with the 2 and 5 button just to see if it can still be detected

Quote:

---

Originally Posted by philzfog12

right if u have se tool lite con it with the 2 and 5 button just to see if it can still be detected

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Will backup GDFS now.
ChipID: D000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.

so its still working u nead to reflash it try to use sony ericsson update service 1st if not and jdflasher wont work then u will have to use a payservice to reflash it