Extracting the FileSystem

Here's how.

You need...

- Firmware (FS, You can download it from the downloading sections)
- main2raw.exe
- SEFStool4.exe
- cmd.exe

(main2raw.exe, SEFStool4.exe are made by Darkmen)

Download the Application


Step 1

Drag the .fbn to main2raw.exe. When it converted, press Enter and the file appear as .raw.

http://i163.photobucket.com/albums/t309/93BH/drag.png

Step 2

Note: It will not work, if you drag .raw to SEFStool4.exe

Try to rename .raw to shorter name (i.e W580_R6BC002_FS_AMERICA_1_RED52.raw to W580.raw).

http://i163.photobucket.com/albums/t309/93BH/rename.png

Open cmd.exe, and type sefstool4.exe <filename>.raw (i.e sefstool4.exe w580i.raw)

http://i163.photobucket.com/albums/t309/93BH/cmd.png

Step 3

You're done!

http://i163.photobucket.com/albums/t309/93BH/done.png

Press Enter to exit the cmd.exe

Here how it's look like

http://i163.photobucket.com/albums/t309/93BH/got-it.png

Extracted file show up!

http://i163.photobucket.com/albums/t...filesystem.png

Note: This tutorial sometimes don't work with different computer.

Nice day

It's not working for me. When I run "cmd.exe" it shows me this error:

Quote:

---

D:\SE Firmware\K750\cmd.exe is not a valid Win32 application.

---

I'm using Windows XP Professional Service Pack 2.

Problem with "cmd.exe" is solved. If you have Windows XP just copy the "cmd.exe" from C:\WINDOWS\system32\ instead of extracting the one from archive. The "cmd.exe" in archive is from Windows Vista. :) Now I have another problem. When I start the proccess with "sefstool4.exe" it displays this error:

Quote:

---

Loading k750.raw header...OK!
Detected FS image version: 23
FATAL: This version is not supported. Check entry file!

---

works perfectly for me... you could also start cmd from start->run
tested with w200 fs

or Start -> All Programs -> Accessories -> Command Prompt

That's work FOr Fs w890i..,OR u have sefstool4 main2raw newer..!
Thank's before..

There is a DB3150 FileSystem Extractor. I have tested with K850_R1CA037_FS_CENTRAL-EUROPE_RED52.fbn
And extracts perfectly.

Just drag the firmware that you want to extract into the .exe file and it will start extracting itself

You can download it fom here
http://se.srzone.ru/load/0-0-0-87-20

Enjoy!!!

i tried this one and good, but i think it can extract only 52. Do you have extractor for 53 FS?

Do you need a DB2020 CID53 FS Extractor or a DB3150 CID53 FS Extractor

Quote:

---

Originally Posted by ama95

It's not working for me. When I run "cmd.exe" it shows me this error:

I'm using Windows XP Professional Service Pack 2.

Problem with "cmd.exe" is solved. If you have Windows XP just copy the "cmd.exe" from C:\WINDOWS\system32\ instead of extracting the one from archive. The "cmd.exe" in archive is from Windows Vista. :) Now I have another problem. When I start the proccess with "sefstool4.exe" it displays this error:

---

What firmware are you trying to extract?

Quote:

---

Originally Posted by h4$_426

Do you need a DB2020 CID53 FS Extractor or a DB3150 CID53 FS Extractor

What firmware are you trying to extract?

---

Extractor for DB2020 CID53... Do you have that? Please share:)...TY

@jhayms
Read h4$_426's post ;)

Have a nice day :D