Printable View
your the man. firmware is valid. however, when using setool2lt. i am not getting the apply patch dialog box.then when i try to write script...... the embedded flash loader doesn't respond. And when using XS++, main firmware flashes ok then fails when flashing the file system.... header type damaged/unknown. still locked on orange but working again thanx
01:12:02| XS++ v3.1 (Darwin) Ready !
01:12:02| Executed on Microsoft Windows XP
01:16:31| Shutting down...
01:46:32| XS++ v3.1 (Darwin) Ready !
01:46:32| Executed on Microsoft Windows XP
01:46:55|
01:46:55| Attempting to open the interface...
01:46:55|
01:46:55| TURN OFF PHONE!
01:46:55| Hold 'C' button on phone and connect phone NOW.
01:46:55| You have 30 seconds...
01:46:55|
01:46:56| Baseband ID: 9900
01:46:56| Protocol Version: 3.1
01:46:57| Phone name detected!
01:46:57|
01:46:57| Profiling SEMC phone...
01:46:57| Platform: DB2020
01:46:57| OTP CID: 49
01:46:57| EROM CID: 52
01:46:57| EROM Color: Red
01:46:57| IMEI: 35170701xxxxxx
01:46:57| Phone ID: K800
01:46:57| Region: ORANGE_GEN
01:46:57| CDA: CDA102511/47 R13A
01:46:57| Firmware Version: R1CB001
01:46:57| EROM: R3A011
01:46:57| Ready for operation!
01:47:48|
01:47:48| Sending db2020_cid01_prodid_p3j.bin...
01:47:48| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
01:47:48| This is a PRODUCTION_ID loader
01:47:48|
01:47:48| Sending db2020_mem_patcher_cid52_r2a006.bin...
01:47:49| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
01:47:49| This is a MEM_PATCHER loader
01:47:49|
01:47:49| Sending db2020_red52_cs_r3a009.bin...
01:47:51| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
01:47:51| This is a CHIPSELECT loader
01:47:51| Activating loader...
01:47:51| Activating GDFS...
01:48:06| This loader is UNLOCKED
01:48:06| Backing up the GDFS...
01:48:08| Stated variables: 1517
01:48:10| Variables found: 657
01:48:13| Variables found: 632
01:48:14| Variables found: 206
01:48:14| Variables found: 22
01:48:14| Wrote backup to .\Backup\K800_35170701xxxxxx_GDFS_BACKUP.bin
01:48:14| GDFS was backed up successfully!
01:48:14| GDFS operation was successful
01:48:16| Disconnected... Unplug the phone
01:50:26|
01:50:26| Attempting to open the interface...
01:50:26|
01:50:26| TURN OFF PHONE!
01:50:26| Hold 'C' button on phone and connect phone NOW.
01:50:26| You have 30 seconds...
01:50:26|
01:50:30| Did not receive 0x5a. Continuing
01:50:35| Disconnected... Unplug the phone
01:50:50|
01:50:50| Attempting to open the interface...
01:50:50|
01:50:50| TURN OFF PHONE!
01:50:50| Hold 'C' button on phone and connect phone NOW.
01:50:50| You have 30 seconds...
01:50:50|
01:50:54| Did not receive 0x5a. Continuing
01:51:01| Disconnected... Unplug the phone
01:51:18|
01:51:18| Attempting to open the interface...
01:51:18|
01:51:18| TURN OFF PHONE!
01:51:18| Hold 'C' button on phone and connect phone NOW.
01:51:18| You have 30 seconds...
01:51:18|
01:51:18| Baseband ID: 9900
01:51:18| Protocol Version: 3.1
01:51:18| Phone name detected!
01:51:18|
01:51:18| Profiling SEMC phone...
01:51:18| Platform: DB2020
01:51:18| OTP CID: 49
01:51:18| EROM CID: 52
01:51:18| EROM Color: Red
01:51:18| IMEI: 35170701xxxxxx
01:51:18| Phone ID: K800
01:51:18| Region: ORANGE_GEN
01:51:18| CDA: CDA102511/47 R13A
01:51:18| Firmware Version: R1CB001
01:51:18| EROM: R3A011
01:51:18| Ready for operation!
01:51:54| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
01:51:54| Custpack: EUROPE_4 (CDA102511/101) (K800)
01:51:54| Generic(non-branded) custpack: Yes
01:51:54| Allowed languages: en, da, fi, is, sv, no,
01:51:54| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
01:51:56|
01:51:56| Sending db2020_cid01_prodid_p3j.bin...
01:51:56| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
01:51:56| This is a PRODUCTION_ID loader
01:51:57|
01:51:57| Sending db2020_mem_patcher_cid52_r2a006.bin...
01:51:57| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
01:51:57| This is a MEM_PATCHER loader
01:51:57|
01:51:57| Sending db2020_cid52red_flash_r2a005.bin...
01:51:57| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
01:51:57| This is a FLASH loader
01:51:57| Now flashing firmware main...
01:51:57| Flashing c:\documents and settings\colin\software\setool2litev1.11\qamaker\k 800_r1cb001_main_generic_red52.mbn
01:51:57| Header type: BABE
01:51:58| 455 flashblocks
01:55:40| Finishing flash
01:55:41| Done flashing
01:55:41| Now flashing filesystem...
01:55:41| Flashing c:\documents and settings\colin\software\xs++\backup\k800_35170701x xxxxx_gdfs_backup.bin
01:55:41| Header type: Unknown/damaged
01:55:41| 292 flashblocks
01:55:41| Binary acknowledge failed with: 89
01:55:41| Failed
01:55:41| Binary acknowledge failed with: 68
01:55:41| Command: Error 0x68
01:55:41| Failed sending flashblock 1. Returnvalue 0x1733814
01:55:41| Finishing flash
01:55:41| Binary acknowledge failed with: 02
01:55:41| Failed
01:55:41| Failed
01:58:15| Error: Flashing failed
01:58:15| Disconnected... Unplug the phone
You put wrong file for FS,you must put FS not GDFS backupQuote:
Originally Posted by jonner
Hi Jonner
I had this problem, you need a later version of SE tool, I got SeTool_2_Lite_1.11 with a quick search in google, it had the patch tick box in that.
Other than that the Tutorial at the begining of this section worked a treat. I had tried several other tutorials most were written in a way that confused my poor old brain.
Do you get the white screen for the sleep mode, I also seem to have a menu.ml problem.
Good luck
Dave
:)
do i need to download the fs file that matches R1CB001?
YES Main and FS must be same version and don' forget to finalize flashing with custpackQuote:
Originally Posted by jonner
mlm122
You can try with another MAIN firmware as well, but if all the padlocks are open, then the patch works. Also I think the problem is that the other network operator(s) are blocking the phone's IMEI...Quote:
Keiji, I have tried the simlock patch gen several times on my my 580i, and it shows all the padlocks unlocked, but stiill won't recognize another operator's sim. What Main file did you use, please?
By the way what error message you get? The 'original' SIM card still works? If you have more SIM cards form different networks try all of them.
unlocked first time, used the same fw main inthe fs box. didn't have a chance using setool2 on its own. now on o2 p&g free calls and txtsQuote:
Originally Posted by seamonkey
i'm using the new version, and tried following the tutorial to the letter with no joy. so i used XS++ with the correct fw main and fs(many thanks for the download) and followed the tutorial that came with XS++, worked first time. am getting the menu.ml error message when i switchon,just glad my phone is unbricked and unlocked:DQuote:
Originally Posted by vidmag
Hi, Simox, I know your patch generator works, which is why I'm really puzzled. I get "Insert Sim Or Press Demo" message on 2 different T-Mobile Sims. That is the default message on a 580, when there is no sim at all in the phone. My native Sim is AT&T and that works just fine. I know the phone is actually unlocked, because all the padlocks are open. I have, so far, tried 2 different MAINS, and 2 or 3 different combos of custom packs. The resulting error message is always exactly the same.Quote:
Originally Posted by simox
The most recent MAIN I tried was W580_R8BE001_MAIN_NAM_1_LA_RED52.mbn, but I have also tried W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
The one thing I will double check with you : Typically when using SETool lite, you take Sim, out, of course. During applying this particular patch, there is no reason to leave it in the phone, is there?
Thanks for trying to help, I do apprec your work on that program.:)