Press "Identify" button in A2Uploader, connect your phone while holding "C", then look to the left pannel.
Printable View
Press "Identify" button in A2Uploader, connect your phone while holding "C", then look to the left pannel.
hi guys 1st post here,,, i bought a k850i of a freind of a freind who told me it was locked on t-mobile. i use o2 myself but when i purchased a t-mobile sim the phone was still asking for a unlock code... does the aerix unlock this code,,, total noob here sorrry,, please help
Since K850 has no CID53, AERIX should unlock it.
thankyou hyperion17,,, ill go about getting myself a usb data cable right away. cheers
Wow, how easy was that, i cant thank you enough hyperion17, i am now up an running on 02. cheers
Any ideas how to unlock the CID53 without Aerix? Is it even possible?
http://www.topsony.com/forum/cmps_in...imate_unlocker
Sony ericsson w595 wont read or wont turn of unless it goes into mass storage
when holding 2 and 5
You might want to turn the phone off, before you connect it holding 2+5
Code:Action journal
16:51:20 Instructions
16:51:20 Please connect the phone via USB while holding 2-5…
16:51:20 . The action name is 'Unlock'
16:51:20 . The action started waiting for the user
16:51:27 . The action finished waiting for the user
16:51:27 Connecting via SEMC USB Flash Device (USB1) (ver. 2.2.0.5)
16:51:27 Connecting to the baseband...
16:51:27 Entering service mode...
16:51:28 Detected chipset: DB3210 P1A/P1B
16:51:28 Boot-ed via: EROM
16:51:28 EROM version: 1200-4341 SEMCBOOT R6A018
16:51:28 e This boot mode is not supported
16:51:28 w You must boot via ROM
16:51:28 e Failed!
16:51:28 . The action reported failure
Error code
# 536910AF005BDA74
Error details
---
19 34 3D AA 03 A1 DF A6 3F 32 2D 0E 95 DB 87 42
D6 64 55 FB 7D 90 2F E0 19 48 B4 5D CB 39 D7 32
F9 2A B5 76 4D 80 81 86 61 1C 23 6F 35 F8 27 CC
C9 15 65 FA 1D 70 CE 4D 9F A0 3D 32 05 16 89 52
67 00 5F 82 7F E7
---
I m getting this. donno what to do?????
if you connected the phone while holding 2+5 try to connect it holding "C"
did you press the button 2 and 5 together while connecting usb?Quote:
Originally Posted by naadhu
make sure you followed the proper procedure and post result
Quote:
Originally Posted by naadhu
What phone? What CID?
Can't anyone put a step by step quide here? Trying to unlock a C510 here but no luck so far - stuck on effin "Please connect phone via usb cable while holding 2-5"
I tried with C702
It took time, finaly it works.
thanks
does anyone knows a way to unlock a K530?
how about reading trough the topic?Quote:
Originally Posted by BiGUKG
for everyone who has an aerix server conection problem
you go to start>run type there "cmd", then type there: ping lock.polphone.com
do it a few times until u have 4 succesfully replies than u do quickly the aerix procedure
(conect while holding 5+2)
hope i helped:) it worked for me=D
hi, is the c902 "battery drain" problem is solved? i read all posts, but didn't find any workin' solution...
my c902 nothing they set erom.cid gdfs what i want to do please help
please post identify log from A2uploaderCID53Quote:
Originally Posted by renmc
Does it work for w800?
A2 uploader is only for a2 phones.... i.e DB3XXX and for other ones i.e DB20XX there are 3 softwares i.e setool lite, xs++ and farmanager.... But these three softwares depends on the CID of phones....Quote:
Originally Posted by Vllatko_Br
hi im new to all this ive unlocked old nokia phones n the past but this seems harder can anyone help with this aerix problem?
Code:Action journal
17:28:26 Instructions
17:28:26 Please connect the phone via USB while holding 2-5…
17:28:26 . The action name is 'Unlock'
17:28:26 . The action started waiting for the user
17:28:45 . The action finished waiting for the user
17:28:45 Connecting via Generic EMP USB Flash Device (USB1) (ver. 2.2.0.5)
17:28:46 Connecting to the baseband...
17:28:46 Entering service mode...
17:28:46 Detected chipset: DB3210 (ID E9000401)
17:28:46 Boot-ed via: ROM
17:28:47 Sending loader...
17:28:52 e Failed!
17:28:52 . The action reported failure
Error code
# 628294B8B19C2AA4
Error details
---
72 5C A8 CA A3 81 C1 3A 21 52 CD 13 0B D4 19 B6
88 65 0B 27 23 B0 71 C0 76 F5 00 BC 95 39 37 EE
A7 4E 28 D1 32 87 8F 47 C1 3C D3 14 69 C1 6D 82
87 2D FB 1A 83 7A E4 C0 15 08 8D 4F 9B F8 D7 C4
03 EC 85 41 E3 61 81 7A 61 EE 8A B5 0F F7 77 DF
C9 14 9B 0C 0A 42 6A 92 61 15 3D CE FB 12 23 CD
BF 7D 45 77 13 A0 1F 90 60 E1 DB E2 85 39 39 1E
97 FE 13 3B D0 42 C1 17 2F EC 63 1C A5 C8 17 72
C7 1C 75 4A DD 6D BF 46 A1 D2 B3 7F 8B 48 99 FE
F6 97 8B 16 A3 30 0F 44 8F CC 03 0A F1 B0 DB 15
---
its a SE W705 on o2 thanks everyone :)
voila Repair SEMCBOOT after AERIX - Top Sony ForumsQuote:
Originally Posted by padr
im trying it with a w890i and its not working for me. im pressing 2 and 5 together when i connect it but nothing, and im also pressing C just incase but nothing either. anyone know what im doing wrong? thanks!
Have you installed SEMC flash drivers...? Install them then connect with AERIXQuote:
Originally Posted by rydo
ok installed them and now seeing something on the AERIX but it says "you must boot via ROM" and its trying to boot by EROM on Aerix. Any idea what I do to get it to boot by ROM?Quote:
Originally Posted by tanjot
ignore me, i think i might have got it. need to buy a new sim now to see if its worked, the one I thought I had has been misplaced.
Hi!
Trying with a C903 but i get a problem when the app. Here's the report:
Can anyone plz tell me what to do??Code:Action journal
21:10:59 Instructions
21:10:59 Please connect the phone via USB while holding 2-5…
21:10:59 . The action name is 'Unlock'
21:10:59 . The action started waiting for the user
21:11:07 . The action finished waiting for the user
21:11:07 Connecting via Generic EMP USB Flash Device (USB2) (ver. 2.2.0.2)
21:11:08 Connecting to the baseband...
21:11:08 Entering service mode...
21:11:08 Detected chipset: DB3210 (ID E9000401)
21:11:08 Boot-ed via: ROM
21:11:09 Sending loader...
21:11:14 e Failed!
21:11:14 . The action reported failure
Error code
# 628294B8B19C2AA4
Error details
---
3D BB C8 68 59 13 19 7C 6B E4 93 35 61 11 7F 8A
93 CB 05 49 47 9E 17 86 C2 E3 BE E2 BF 4B AF 94
E3 64 A6 33 08 29 17 85 0B 36 0D CA 3D 13 35 7C
9D 1F 0B 38 19 88 42 7A 21 E6 8D 51 71 36 0F BE
79 BA 0B 1F 99 F3 A7 BC 55 5C 54 D7 1B 55 91 DD
2D 1E 95 12 6E 70 8C 50 55 07 7D 90 D1 E0 3B 4B
05 D7 35 19 D7 CE F9 2E D4 6B 7B 3C D1 67 9F 1C
73 C8 E3 19 B4 CC 99 2D 9B FA E3 9E 31 0A CF 0C
3D 32 05 E8 27 03 67 04 15 64 ED 61 E1 9A FF 04
EC E5 85 84 39 1E 97 02 C5 26 43 B4 25 3E 43 93
---
Identify your phone with A2Uploader; if it's CID53, Aerix won't work.Quote:
Originally Posted by hasse_b
What options are there?? I have a W715 CID53 on Vodafone which I am trying to unlock??Quote:
Originally Posted by hyperion17
Then you cant unlock your phone for free use D-ultimate unlocker.....
WOW thanks for that!! been messing about for 2 days with aerix, paid £13.50 and unlocked it no probs with d-ultimate unlocker! thanks again
does anyone have a password and username for aerix i could use? it wont let me register
hi How do i unlock W595 using aerix... plz............
Just tried this A2 unlock software to unlock a C902. Failed on 2 computers after the first instruction. "Connect to computer via usb and press2-5". Nothing happens after that. The computer recognises that my phone is connected as I selected the phone mode straight after. I have registered and logged on before attempting to unlock the phone. The software device box doesn't show any phone or device connected.
1. The phone must be switched off when connecting itQuote:
Originally Posted by Oscarw
2. You need Gordon's Gate Flash Driver installed on the computer (I recommend using Win XP)
I have successfully unlocked half a dozen w890is and a k660i using Aerix. Two problems I've experienced:
1. Aerix could not communicate with the server. It must have been down that whole day. When I tried it the next day it was working again.
2. When unlocking a w890i which was debranded after "Server communication..." follows "Phone restarts...", this is where the process froze. To fix it I disconnected the phone (leaving Aerix running), replaced the battery and connected it again while holding down 2 & 5, luckily the continued and the phone unlocked successfully.
There is new tool available. See this:
test itQuote:
Omnius is a new tool on the market that provides you many servicing features for your Sony Ericsson mobile phones.
Finally it is a tool which focus on reliability, ease of use and to save your time by it's multitasking operations.
We introduce Omnius with opening promo: All operations are for free.
No card, No dongle, No box. During Omnius promo: No money as well !!
All you need: Omnius software, registered account, phone and cable.
Do you have a supreme account?
Good news! No registration needed. Start using Omnius immediately.
Features and operations included
*
Operations
o Phone unlock
o Flashing and phone customization
o GDFS/TA backup and restore
o Detailed phone identification
*
Features
o Suitable for either beginners or experts
o Multiple simultaneous operations
o User friendly interface
o Customizable window layout
o Many supported languages
o More features are coming soon
*
Supported phone's platforms
o DB2000
o DB2001
o DB2010
o DB2012
o DB2020
o DB3150
o DB3200
o DB3210
o DB3350
o S1-LOCOSTO
o S1-NEPTUNE
o PNX5230
o Complete list of supported phones: Supported phones | Omnius
To learn more about Omnius visit Home | Omnius
is it still work with g502? Yesterday, I try to unlock my g502,but the server is error, what the happen? Anybody can help me..:D
try with omniusQuote:
Originally Posted by k4ng4hid
Hello, I have W995
is Aerix supporting my Phone?
Use Omnius - it's free!Quote:
Originally Posted by ashkhan
Aerix is closed from now on