Remove SIM-lock patch generator

Thanx a lot man this really helped me.... But Ive got into some more troubles. I flashed the Vodafone branded K800i with K800_R8BA024 firmware (i flashed the MAIN only), the phone is now unlocked, but there is some problem with the display lights... the display is bright when i start the phone, but after it fades, it is not bright when i press any key or do anything. I tryied to change the brightness, then my display was bright again, but when i put the phone away, and it faded, it didnt light up back again.... what do you think is the problem? does that happended because i didnt flashed the FS too? thanx for answer. and sorry for my bad english :)

Quote:

---

does that happended because i didnt flashed the FS too?

---

If the MAIN and FS doesn't match, it can cause strange problems. The phone had a vodafone branded one? Please post an identify log too...

Hi guys,

Does anyone have an answer for me -- would be really appreciated.

Quote:

---

Originally Posted by simox

If the MAIN and FS doesn't match, it can cause strange problems. The phone had a vodafone branded one? Please post an identify log too...

---

Well this is what the log writes now:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35471601562399 CERT:RED
FLASH CID:52 COLOR:RED


Model:K800i
MAPP CXC article: R8BA024 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BA024
Language Package:VFE_LIVE_2
CDA article: CDA102511/125
CDA version: R1A
Default article: cxc1250490
Default version: R1ED001

Network LOCKED
Operator: 234-15

Elapsed:6 secs.

Its after i updated the FS too, the lights are ok now but i get this message after i enter my pin i get this message: Configuration error. Please contact your network operator or service centre. I updated the phone this way: First, i flashed both Main and FS but without the sim lock patch... after that i flashed only the Main with the patch file.

Quote:

---

Originally Posted by boxer

Hi guys,

Does anyone have an answer for me -- would be really appreciated.

---

OK. First you read your phone with XS++ and post log here.
Main + VKP. only if main matches with that one you have in phone.
Full flash is needed if you want put new version or different from that one in your phone

Quote:

---

Originally Posted by bullseye50

Well this is what the log writes now:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35471601562399 CERT:RED
FLASH CID:52 COLOR:RED


Model:K800i
MAPP CXC article: R8BA024 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BA024
Language Package:VFE_LIVE_2
CDA article: CDA102511/125
CDA version: R1A
Default article: cxc1250490
Default version: R1ED001

Network LOCKED
Operator: 234-15

Elapsed:6 secs.

Its after i updated the FS too, the lights are ok now but i get this message after i enter my pin i get this message: Configuration error. Please contact your network operator or service centre. I updated the phone this way: First, i flashed both Main and FS but without the sim lock patch... after that i flashed only the Main with the patch file.

---

You need one more file to finish this. You need CUSTPACK-find in download section and choose one that match with your main and FS

Thanks, SeaMonkey. Here is the log from XS++, and I am going to patch with Remove_sim_lock_w810_R4DB005.vkp, which was generated using W810_R4DB005_MAIN_ORANGE_HN_RED49

Quote:

---

22:13:58|

22:13:58| Attempting to open the interface...

22:13:58|

22:13:58| TURN OFF PHONE!

22:13:58| Hold 'C' button on phone and connect phone NOW.

22:13:58| You have 30 seconds...

22:13:58|

22:14:02| Baseband ID: 8040

22:14:02| Protocol Version: 3.1

22:14:02|

22:14:02| Sending db2010_cid00_prodid_p3l.bin...

22:14:02| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

22:14:02| This is a PRODUCTION_ID loader

22:14:02| Activating GDFS...

22:14:03| Phone name detected!

22:14:03|

22:14:03| Profiling SEMC phone...

22:14:03| Platform: DB2010

22:14:03| OTP CID: 49

22:14:03| EROM CID: 49

22:14:03| EROM Color: Red

22:14:03| IMEI: 35906400xxxxxx

22:14:03| Phone ID: W810

22:14:03| Region: ORANGE_GEN

22:14:03| CDA: CDA102494/51 R12A

22:14:03| Firmware Version: R4DB005

22:14:03| EROM: n/a

22:14:03| Ready for operation!

22:14:11| Reading GDFS...

22:14:11|

22:14:11| ... and the phone lock code is: 0000

22:14:11|

22:14:11| GDFS operation was successful

22:14:13| Disconnected... Unplug the phone

22:14:27| Shutting down...

---

So, do I still need to flash Main while applying the patch, or just apply the patch?

Main + VKP.

Quote:

---

Originally Posted by seamonkey

You need one more file to finish this. You need CUSTPACK-find in download section and choose one that match with your main and FS

---

thanx man, but i cannot download anything from the Download section, it writes restricted access, and i have to buy an account... what can i do about that?

And does it have to be this one? K800i_CDA102511_125_R1A_Vodafone_United_Kingdom ?? cause the CDA102511_125_R1A was written in the SeTool log.

thank you!!! i just used this with my w580i and it worked! thanks a lot! :D