Printable View
Again.....
Used DKU-60
Chkbox - Chk - Use quick access
Misk - Unlock patch K610 Kg001 cid 52
Write script - hold C on the phone and plug cable
...........Going to execute VKP script
Status line run...0-100 % and next and next ...
44 minutes ago .....run run run...
:confused:
You need to install the USB Flash Driver. Check the first post of this thread. There is an unlocking tutorial. Follow it carefully...
Again !:) Install all drivers ....see log!
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:K610i
Brand:Sony Ericsson
MAPP CXC article: R1KG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1KG001
Language Package:RUSSIA
CDA article: CDA102568/7
CDA version: R4A
Default article: cxc1250376
Default version: R1KG001
Operator: 000-00
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: E:\SE\se2lite\vkp\Remove_SIM_lock_K610_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:14 secs.
But Phone not UnLocked :(
Apply first the quick access patch with the flag "Bypass db2020 security" and main firmware file in ADD box, press flash. Then apply the unlock patch with only "Quick Access" flag, press write scriptQuote:
Originally Posted by nickjust
READ FIRST POST!
All this I did earlier.If I have not made Quiack access - that patch was not sewn!
All over again
See log!
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001682150 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001682150 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing E:\100_PROC\SE\XS\K610\K610_R1KG001_MAIN_GENERIC_T H_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: E:\100_PROC\SE\se2lite\qamaker\quick_access_K610_R 1KG001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45B40000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:2176 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001682150 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: E:\100_PROC\SE\se2lite\vkp\Remove_SIM_lock_K610_R1 KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:21 secs.
.................PHONE LOCK CODE :-(
It looks like you applied the patches correctly. Put in phone a SIM card from other provider, and if the phone accept it, then your phone is unlocked.
Does this patch work for z520 phones? it is cid36 what flashing tool should i use?
Thanks
Yes, it works with Z520 CID36 phones. To apply the patch use the FAR Manager + SEFP(Sony Ericsson Flasher Plugin - or something like this :) ).
i try your tutorial with a w710i from orange here is the data
Baseband ID: 9900
21:54:08| Protocol Version: 3.1
21:54:08| Phone name detected!
21:54:08|
21:54:08| Profiling SEMC phone...
21:54:08| Platform: DB2020
21:54:08| OTP CID: 49
21:54:08| EROM CID: 49
21:54:08| EROM Color: Red
21:54:08| IMEI: 35306601xxxxxx
21:54:08| Phone ID: W710
21:54:08| Region: ORANGE_GEN
21:54:08| CDA: CDA102566/14 R8A
21:54:08| Firmware Version: R1EE001
21:54:08| EROM: R3A016
21:54:08| Ready for operation!
21:54:19| User chose NOT to update EROM CID!
can you tell me if i need to change the cid to 52 and if i do that is it ok for the phone?
Second question, the firmware .mbn i get on the net doesn't seem to work with your patch generator, i try with W710_R1EE001_MAIN_GENERIC_CH_RED49 found on this site but i got a error message, should i use a W710_R1EE001_MAIN_GENERIC_CH_RED52 ?
thanks for your time and sorry for my english....
First upgrade your phone to cid 52, then use W710 R1EE001_MAIN_GENERIC_CH_RED52
Nice day