Read The Last Section "Recovering From A Bad Flash".
Printable View
Read The Last Section "Recovering From A Bad Flash".
Great thread! helped me alot :p
:eek:
:mad:
1. The start was good. I successfully unlocked my w580i from at&t and used
my local Indian SIM for about an hour.
2. Then started debranding as at&t destroyed the usage of the phone.
3. The Main, FS and custpack files used were
MAIN: W580_R8BE001_MAIN_GENERIC_LA_RED52
FS: w580_R8BE001_FS_S_ASIA_LEVAN_RED52
Custom: HB1-06_Gen_CDA102568_110_R8A_GENERIC_S_ASIA_LEVAN
4. Flashing successful. W580 debranded successfully.
5. Then while FSX I got the Command Error.
6. So, when I insert the SIM now I get a configuration error.
7. I have my GDFS backed up, but what do i do with GDFS?
I checked all the posts again, but confused which combination of Main & FS should be used.:confused:
Your MAIN And FS Are Perfect:). Even Your Custom Combination Is Correct But Since You Recieve A Configuration Error, You Had Made A Mistake Applying Custom Files. Reapply The Custom Pack And Post Your Logs If You Still Get Error. And You Need To Re-unlock Your Phone For Sim To Work Since Flashing MAIN Destroys All Patches And Thus Patch Unlock Too.Quote:
Originally Posted by p_mandelia
Dear mohdumer,
Sorry for not attaching the log as requested. I pasted all the logs in a document file and forgot to save it. But, will attach it tomorrow as I’ll have to do the entire process again as I’m still unsuccessful in removing the configuration error.
Referring to the problem: I think you’ll need to guide me with the sequence of operation for debranding and then unlocking. I’ll share the different options I’ve tried and possibly you could find my mistake or suggest me better options.
1. Initially, I debranded my AT&T W580i Sony Ericsson phone. The Main, FS and custom packs were selected as suggested and you have acknowledged the same.
2. Flashing was successful, so I started customization using FSX. As I got a Command Error previously, I removed my memory card this time and FSX was successful.
3. Network was locked as expected, hence, used Setool2lite v1.11 to unlock the phone. It Flashed the main area again and unlocked my phone successfully, but when I insert my Sim, I receive a configuration error “Contact Service centre or network provider.”
I tried the following options to get my phone working depending on the various posts with reference to debranding and unlocking:
1. I debranded my phone again using XS++ v3.1 and tried writing only the unlocking SCRIPT using Setool2lite. But, the Setool2lite fails at embedding bootloader.
2. I followed the normal Setool2lite procedure and successfully unlocked the phone. So, I connected the phone to XS++ and found that the custpack was erased while unlocking using Setool2lite.
3. Hence, I flashed only the FS using XS++ after unlocking the phone and added the custpack using FSX. The phone was unlocked and all the Main, FS & custpack were loaded, but, still the configuration error.
4. I think I should try the America_1 FS and custpack available at some anro**.com and hope it works.
5. Else, I should modify the configure.xml file in the custpack by contacting my network service provider. I hope they’ll help me with some details.
6. I’ve used the Phone locks option in XS++ GDFS area which says that the phone locks for DB2020 has been reset to 0000. I’m still unsure about what this means.
Sorry, for the long post without a log. Please help!!
Platform: DB2010
10:33:01| OTP CID: 49
10:33:01| EROM CID: 49
10:33:01| EROM Color: Red
10:33:01| IMEI: 35527101xxxxxx
10:33:01| Phone ID: W700
10:33:01| Region: EMEA_6
10:33:01| CDA: CDA102663/56 R1A
10:33:01| Firmware Version: R1CA021
10:33:01| EROM: n/a
This is my w700 phone and i flshed it using the following two files:
1:for fs:W700_R1CA021_FS_EMEA_6_RED49.fbn
2:for main:W700_R1CA021_MAIN_EU_1.mbn
it flashed successfully but when i turn on my phone it shows an error:
Configuration error.
Please contact your network operator or service centre
Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You must finalize your phone. Look here example:
Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].
Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.
Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)
Nice day
Im sorry but i did not understand what you meant by finalisation
please just tell me what i should do for the normal functioning of my phone and whether the files used for flashing were correct
i have used xs++ for flashing (just in case it helps you to help me)\
Platform: DB2010
10:33:01| OTP CID: 49
10:33:01| EROM CID: 49
10:33:01| EROM Color: Red
10:33:01| IMEI: 35527101xxxxxx
10:33:01| Phone ID: W700
10:33:01| Region: EMEA_6
10:33:01| CDA: CDA102663/56 R1A
10:33:01| Firmware Version: R1CA021
10:33:01| EROM: n/a
This is my w700 phone and i flshed it using the following two files:
1:for fs:W700_R1CA021_FS_EMEA_6_RED49.fbn
2:for main:W700_R1CA021_MAIN_EU_1.mbn
also tell me which files i should use for flashing
thanks in advance
I got my phone to work normally thanks to your(jasmin) post on another page about the customise thing.Quote:
Originally Posted by kpalesha
No problem. I`m glad that you manage to make it work.
Nice day
hi, I wanted to flash my w850 to last FW with sx++, but after I press FLASH, it gets me an error and crash my windows. it doesn't show any thing in log file.
EDIT:
I could get log, in XP, here it is
18:28:32| XS++ v3.1 (Darwin) Ready !
18:28:32| Executed on Microsoft Windows XP
18:28:35|
18:28:35| Attempting to open the interface...
18:28:35|
18:28:35| TURN OFF PHONE!
18:28:35| Hold 'C' button on phone and connect phone NOW.
18:28:35| You have 30 seconds...
18:28:35|
18:28:41| Baseband ID: 9900
18:28:41| Protocol Version: 3.1
18:28:41| Phone name detected!
18:28:41|
18:28:41| Profiling SEMC phone...
18:28:41| Platform: DB2020
18:28:41| OTP CID: 49
18:28:41| EROM CID: 49
18:28:41| EROM Color: Red
18:28:41| IMEI: 35240101xxxxxx
18:28:41| Phone ID: W850
18:28:41| Region: M_EAST_N_AFR
18:28:41| CDA: CDA102239/43 R15A
18:28:41| Firmware Version: R1ED001
18:28:41| EROM: R3A016
18:28:41| Ready for operation!
18:28:44| User chose NOT to update EROM CID!
18:29:08|
18:29:08| Sending db2020_cid01_prodid_p3j.bin...
18:29:08| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
18:29:08| This is a PRODUCTION_ID loader
18:29:08|
18:29:08| Sending db2020_mem_patcher_cid49_r2a006.bin...
18:29:09| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
18:29:09| This is a MEM_PATCHER loader
18:29:09|
18:29:09| Sending db2020_cid49red_flash_r2a001.bin...
18:29:09| Applet ID: 060721 1022 HANCXC1329129_DB2020_FLASHLOADER_R2A001
18:29:09| This is a FLASH loader
18:29:09| Now flashing firmware main...
18:29:12| Flashing k:\w850_r1kg001_main_generic_cy_red52.mbn
18:29:12| Header type: BABE
18:29:12| 460 flashblocks
18:29:12| Binary acknowledge failed with: 89
18:29:12| Failed
18:29:13| Binary acknowledge failed with: 68
18:29:13| Command: Error 0x68
18:29:13| Failed sending flashblock 1. Returnvalue 0xD0022D00
18:29:13| Finishing flash
18:29:13| Binary acknowledge failed with: 02
18:29:13| Failed
18:29:13| Failed
18:30:02| Error: Flashing failed
18:30:02| Disconnected... Unplug the phone
18:30:02| Shutting down...
Well I Cant Help Without Logs. Heres A Noob Answer Which Might Help You. In FSX, Browse To /tpa/preset/custom And Paste The Custom Files (Around 10 Files) In The Pack To The Folder. Well Please Post Your XS++ Log And Also Upload Your customize.xml File So I Can Help You Out.Quote:
Originally Posted by p_mandelia
Thanks buddy,Quote:
Originally Posted by mohdumer
The final solution was a life saver. I extracted all the customization files and here I am using the phone. It's cool & as we call it zhakaas. I think after using all this so many times, even I'll be able to help others with XS++ and Setool2lite.
My observations if helpful to other are:
1. Remove memory card also.
2. If you wanna debrand as well as unlock, you debrand first, then unlock and then use XS++ to flash FS only and customize with extracted files.
3. Chao you're done.
ENJOY!!!!;)
hello, i really wanted to flash my p990i but I cannot find any firmware that i can use. I surf the internet, use google but i have no luck to find one. I found 2 firmware fir p990i in the download section but i need to pay or wait for 2 months before i can download it..is there any site where i can download a firmware for my phone directly?
I don't want to use SEUS update because i have a very poor connection with a download speed of 13kb/sec,
thanks.
Pay For It. Its Only 3 Euro's. You Wont Find A Better Place For Firmwares Than TopSony:)
Hello, first time poster here with a problem. So when I connect my phone to the computer, holding C and inserting the cable, the log goes like this:
And it gets stuck there. Any suggestions? I'm using a w810i, btw.Code:06:44:04| XS++ v3.1 (Darwin) Ready !
06:44:04| Executed on Microsoft Windows XP
06:46:05|
06:46:05| Attempting to open the interface...
06:46:05|
06:46:05| TURN OFF PHONE!
06:46:05| Hold 'C' button on phone and connect phone NOW.
06:46:05| You have 30 seconds...
06:46:05|
06:46:13| Baseband ID: 8040
06:46:13| Protocol Version: 3.1
06:46:13| NEW SECURITY PHONE DETECTED! SWITCHING...
Can you tell more informations, such as model, firmware version, cid, about your phone?
And check the sticky thread that shows the common errors.
The model is Sony Ericsson W810i. Dunno about the others.
Tried connect with setool lite and copy here your phones log.
Nice day
Can I flash K310 with XS++ 3.1?
Ofcourse Yes!:D You May Flash Any Phone Up To DB2020 CID52 With XS++ v3.1.Quote:
Originally Posted by ama95
hay may i convert k750i to w00i using xs++
yes u can convert ur k750i to w800i just like Mohdumer said earlier..Quote:
Originally Posted by manya90
"You May Flash Any Phone Up To DB2020 CID52 With XS++ v3.1."
Use Entire Method Of Normal Flashing And Use W800 Files (MAIN+FS+Custom) Instead Of K750. Enjoy Your W800.Quote:
Originally Posted by manya90
my phone is dead during flashing process and not starting using SEUS also what to do?
Does XS++ Detects It? If Not Try Connecting It To SeTool2 Lite Using 2+5 Keys And Post Your Logs For Each Case Here.
can I apply vkp using XS++
No. Use setool lite.
Flash your phone and How to apply or remove patch using SETool 2 Lite
Nice day
Here can you download xs++ 3.1 with tutorial how to do anything:
XS++ 3.1 with tutorial
Nice day
Dear everybody,
I'm a noob in telephonic. I've a SE W850i, i'm trying this tutor with my phone but i've got a problem in the step 3) Flashing the firmware. I don't understand where and how I can find the firmwares. So, I can't do this guide 'til the end. Help me, plsss !
PS: I'm so sorry for that dummy question.
All firmware you can find in download section of TopSony, but first read this:
How to get access to download section
Nice day
good XS++ 3.1
can i change my phone language? i want Persian(Farsi) on my phone, but my K800i doesnt have this language. should i flash my phone with a firmware that belongs to middle east? but what version exactly? there seems to be lots of firmwares for k800i for middle east!
i got one more question. i was updating my k800i using SE Update Service. when everything is finished, it just seemed to be ok, but now, my phone doesnt record MISSED CALLS, when there is a missed call, my phone say there is one, but it doesnt display who called!
what should i do?
my phone seems not to record any call records! even outgoing calls!
can anyone tell me what to do?
Huh. Seems odd. Try a factory reset, or a full reflash. Save your data first.
@peyman609:
You Have Used SE Update Service Which Would Have Upgraded To CID53. Now You Cant Edit FS, Cant Flash And Cant Modify. Use SEUS And Force It To Reinstall Firmware. Thats The Only Free Way.
I'm trying to restore my GDFS, but after half our, it still stays at
16:22:01| Hold 'C' button on phone and connect phone NOW.
16:22:01| You have 30 seconds...
16:22:01|
16:22:08| Baseband ID: 9900
16:22:08| Protocol Version: 3.1
16:22:09| Phone name detected!
16:22:09|
16:22:09| Profiling SEMC phone...
16:22:09| Platform: DB2020
16:22:09| OTP CID: 51
16:22:09| EROM CID: 52
16:22:09| EROM Color: Red
16:22:09| IMEI: 35578501xxxxxx
16:22:09| Phone ID: W880
16:22:09| Region: CENT_EUROPE
16:22:09| CDA: CDA102568/10 R10A
16:22:09| Firmware Version: R1JC002
16:22:09| EROM: R3A016
16:22:09| Ready for operation!
16:22:34|
16:22:34| Sending db2020_cid01_prodid_p3j.bin...
16:22:34| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
16:22:34| This is a PRODUCTION_ID loader
16:22:34|
16:22:34| Sending db2020_mem_patcher_cid52_r2a006.bin...
16:22:34| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
16:22:34| This is a MEM_PATCHER loader
16:22:34|
16:22:34| Sending db2020_red52_cs_r3a009.bin...
16:22:36| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
16:22:36| This is a CHIPSELECT loader
16:22:36| Activating loader...
16:22:36| Activating GDFS...
What's wrong, please?
You Only Need To Restore GDFS When Your Phone Had A Bad Flash Or A Red Led In Infra. If You Think Restoring GDFS Is Necessary, Try SeTool Lite.
can this XS++ be used to customizing K850i?