hey mohdumer...i have a k800 wid modded acoustics and camera drivers and fonts....so by flashing it to k810 will it stay...or will i hv to modd the drivers again?...
help will be appreciated...
cheerz...
Printable View
hey mohdumer...i have a k800 wid modded acoustics and camera drivers and fonts....so by flashing it to k810 will it stay...or will i hv to modd the drivers again?...
help will be appreciated...
cheerz...
When You Flash A New MAIN, All Drivers Vanish Away. You'll Have To Put All The Modding Stuff Again.:D
ok...so if i have M_East_N_Africa pack in my k800...i can not flash it wid a medditerranean filesystem pack??...
or is it necessary to flash the filesystem??...isnt flashing the MAIN enough?...
coz i did the same thing wid k750->W800 and it worked...so was jus wondering...
and i have modded my k800 wid menu icons and fonts and acoustic drivers...so wen i flash my fone to k810..will it remain...or will i have to put dem again??
help will be hugely appreciated...
Cheerz...
Quote:
Originally Posted by mohdumer
oh okay...dats not a prob...ill put the drivers again..:)...and sorry the for asking the same question again in my earlier post...:D...
nice explanation keep it up ........ how can i get flash menus & themes.............
For what phone?
Put flash menus on your phone - only flash supported phones
Nice day
I seemed to have 'bricked' mine.
I have two W580i's and one was water damaged but everything worked baring the display, the lcd wasnt broken or faulty because i tired it in the other phone and it worked fine, i tried the working phones lcd in the water damaged one and it did the same thing and not display anything.
Anyway after following this and found some firmware from another forum post i backed it up using the XS++ and flashed it with the firmware, this didnt do anything so i thought its not a software issue and i dicided to restore it from the backup to what the software was, only i accidently selected the backup from my other W580i, Now everytime i try and turn it on, or plug it into charge it just flashes a red light at the side.
Is there anything i can do to put the firmware back on now? It wont pick it up on the pc when connected either.
Thanks
Well I Dont Want To Say But You Just Have An Expensive Brick With You:( No Cures. To Bring It Back To Life, The IC Needs A Replacement. Take It To Service Center.
i suppose im not getting it .... what will all this debranding stuff do for you? does it get you free stuff? can i use it to browse the net for free? tell me ...why would someone want to do this to their fone?
Debranding Removes The Operators Crap Stuff And Brings It To SE's Genuine Stuff Which Your Phone Would Have If You Purchased A Unlocked Phone. Most Prefer Debranding When They Want To Unlock To Convert There Phone To SIM-Free. Flashing Also Solves Some Intermident Problems Like White Screen, Slow Performance Issues, Hanging Problems etc.Quote:
i suppose im not getting it .... what will all this debranding stuff do for you? does it get you free stuff? can i use it to browse the net for free? tell me ...why would someone want to do this to their fone?
How can I save the original drivers before I start replacing them with XS++?
The original drivers can be found in the internet as own_cutspack_original .... acoustic for example and in files ***_*******_extracted.rar, where ***_******* are the phone model and firmware.
You can copy them with FAR, but it's easier to download them :)
What a shame :(
I would have thought that if it was bricked, there would be no life, but it has the light,
never mind.
I don't get this.
I just want a flash theme for my phone, do i have to follow all the steps or can i just upload the swf & theme files with XS ++?
Or do i have to install some kind of firmware (what is firmware)?
You Dont Have To Do All This. Simply Upload Your *.swf File To The Required Directory Using "Uploading Files Via FSX" Section.Quote:
Originally Posted by m-melina
Hey all, i got with my stupid k800i, when i want to get in games and applications i get operation failed. I down XS++ and i get this
19:04:55| Baseband ID: 9900
19:04:55| Protocol Version: 3.1
19:04:55| Phone name detected!
19:04:55|
19:04:55| Profiling SEMC phone...
19:04:55| Platform: DB2020
19:04:55| OTP CID: 51
19:04:55| EROM CID: 52
19:04:55| EROM Color: Red
19:04:55| IMEI: 35731501xxxxxx
19:04:55| Phone ID: K800
19:04:55| Region: EUROPE_2
19:04:55| CDA: CDA102511/74 R10A
19:04:55| Firmware Version: R1JC002
19:04:56| EROM: R3A022
19:04:56| Ready for operation!
Now my problem is, is there any other way whic and where i can dow firmwares for my phone. Thx for help :)
DB2020 Can flash GDFS?
Right, I am kindof confused,
My flashed 'bricked' W580i will not be picked up with XS++ or Setool2 but will be picked up in a fashion with Setool2 when i connect and press and hold 2+5
Can this be used to fix it? i have tried write GDFS and selected the file i first made/backup with XS++ before i did any flashing the other day.
all i get is 'file cannot be found or opened'
any hopes for this. there seems to be something going on
RIGHTT IT DID IT :D
It wrote the GDFS file! and now boots up, the only problem is, the screen still does not come up due to water damage and software may have been a problem thats why we tried flashing, the screen is not broken as it works perfect in mine. The slide part knows its there when its slid up, the keys work, the speaker does, just the screen doesnt show or the lights on the top slider.
Strange.
Adam D: Hardware Problem. Adam D, You Should Have Told Us Before That You Had A GDFS Backup.:D A Phone With Red LED Blinking And NO GDFS BACKUP Has No Cure. But You Had A Backup. However, Sorry For Dissapointing In Previous Posts.Quote:
Originally Posted by Adam D
amwdcguh: Only Flash GDFS When Your Phone Creates Touble!!!Quote:
Originally Posted by amwdcguh
thanks alot, but can you do this on w910?
i heard that it works on all walkmans, but also that it doesn't work on w910.
that is strange, because w910 supports flash!
is it possible that xs ++ might get a new version which supports w910?
Yes, w910 support flash. Xs++ or setool lite doesn`t full ( they detect, but nothing else ) support new platform phones ( db 3150 ). Maybe new xs++ , when it will come out.
Nice day
how can I restore GDFS with setool?
This Section Is For XS++. You May Use XS++ To Do Your Job. Read Last Section Of This Tutorial, Recovering From Bad Flash.Quote:
Originally Posted by archtuanng
works great but cannot upload with fsx the software just shut downs by itself when i click the button "fsx"
Good tutorial. I have a question: is it possible to read phones flash with XS++v3.1 and write it on a computers hdd?
No.Quote:
Originally Posted by Krizak
Nice day
How i can install another custom File Not listed in the program
Xs++ 3.1
Customize file system
Select phone model - own custpack
Nice day
After when it ditected then i click the start FSX and after some wait this massage appear.
14:14:47| Please wait while XS builds a list of directories...
14:14:47| Activating filesystem
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:51| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Command: Error 0x02
14:15:52| Binary acknowledge failed with: 15
14:15:52| Command: Error 0x15
14:15:52| Binary acknowledge failed with: 15
14:15:52| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:53| Binary acknowledge failed with: 15
14:15:53| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:54| Binary acknowledge failed with: 15
14:15:54| Command: Error 0x15
14:15:55| Binary acknowledge failed with: 15
14:15:55| Command: Error 0x15
14:15:55| Binary acknowledge failed with: 15
14:15:55| Command: Error 0x15
14:15:55| Binary acknowledge failed with: 15
14:15:55| Command: Error 0x15
Why this error is coming
Sorry For Late Reply:( Your Error Is Due To Fault USB Flash Driver Installation. Remove Traces Of USB Flash Driver From Device Manager And Reinstall It.:)Quote:
Originally Posted by azeemiqbal
yes ppl...i have a k790 and it would not turn on i figured the erom is bad...i want it repair but it doesn't even connet to xs++ so how am i going 2 fix that problem??? add me at t.o.marshall@hotmail.com
Go To REPAIRING EROM GUIDES for most sonyericsson phones - Top Sony Forums And Use KulanKendi Method.
What is the file type for main and FS?... I mean like .ss or .flp something like that.
TIA
MAIN can be .mbn or .bin and FS can be .fbn or .bin or they both can be without file type.
Sorry for my english.
Hi guys,
Sorry for repeating the same kind of question again. But, before attempting unbranding and unlocking on my W580i, I needed to confirm the following things:
1. I have a Sony Ericsson w580i which was purchased from AT&T Cingular USA.
2. Now, I have been transferred back to Mumbai, India and want to unlock it for using it in India with the local GSM operator MTNL.
3. So, kindly suggest the corresponding Main and FS firmware & custom pack applicable.
4. Also, while selecting the phone model in XS++ v3.1, W580 is not present in the drop down list, so which model should I select?
5. I have successfully backed up my GDFS & the report is as below for reference.
02:34:39| XS++ v3.1 (Darwin) Ready !
02:34:39| Executed on Microsoft Windows XP
02:35:33|
02:35:33| Attempting to open the interface...
02:35:33|
02:35:33| TURN OFF PHONE!
02:35:33| Hold 'C' button on phone and connect phone NOW.
02:35:33| You have 30 seconds...
02:35:33|
02:35:39| Baseband ID: 9900
02:35:39| Protocol Version: 3.1
02:35:39| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
02:35:39| ...using GDFS name
02:35:39|
02:35:39| Profiling SEMC phone...
02:35:39| Platform: DB2020
02:35:39| OTP CID: 51
02:35:39| EROM CID: 52
02:35:39| EROM Color: Red
02:35:39| IMEI: 01127100xxxxxx
02:35:39| Phone ID: W580
02:35:39| Region: CINGULAR
02:35:39| CDA: CDA102774/102 R17A
02:35:39| Firmware Version: R7AC001
02:35:39| EROM: R3A022
02:35:39| Ready for operation!
02:35:52|
02:35:52| Sending db2020_cid01_prodid_p3j.bin...
02:35:52| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
02:35:52| This is a PRODUCTION_ID loader
02:35:52|
02:35:52| Sending db2020_mem_patcher_cid52_r2a006.bin...
02:35:53| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
02:35:53| This is a MEM_PATCHER loader
02:35:53|
02:35:53| Sending db2020_red52_cs_r3a009.bin...
02:35:54| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
02:35:54| This is a CHIPSELECT loader
02:35:54| Activating loader...
02:35:54| Activating GDFS...
02:36:17| This loader is UNLOCKED
02:36:17| Resetting Lock Code...
02:36:17| Lock Code...Reset to '0000'!
02:36:17| Terminating GDFS Access...
02:36:17| GDFS operation was successful
02:36:20| Disconnected... Unplug the phone
02:51:15| XS++ v3.1 (Darwin) Ready !
02:51:15| Executed on Microsoft Windows XP
02:51:19|
02:51:19| Attempting to open the interface...
02:51:19|
02:51:19| TURN OFF PHONE!
02:51:19| Hold 'C' button on phone and connect phone NOW.
02:51:19| You have 30 seconds...
02:51:19|
02:51:23| Baseband ID: 9900
02:51:23| Protocol Version: 3.1
02:51:23| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
02:51:23| ...using GDFS name
02:51:23|
02:51:23| Profiling SEMC phone...
02:51:23| Platform: DB2020
02:51:23| OTP CID: 51
02:51:23| EROM CID: 52
02:51:23| EROM Color: Red
02:51:23| IMEI: 01127100xxxxxx
02:51:23| Phone ID: W580
02:51:23| Region: CINGULAR
02:51:23| CDA: CDA102774/102 R17A
02:51:23| Firmware Version: R7AC001
02:51:23| EROM: R3A022
02:51:23| Ready for operation!
02:51:42| After making any changes with FSX
02:51:42| you must press the 'Shutdown' button
02:52:43| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
02:52:43| Custpack: AMERICA_2 (CDA102460/101) (K510)
02:52:43| Generic(non-branded) custpack: Yes
02:52:43| Allowed languages: en, pb, xl,
02:52:43| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Software Info:
R7AC001 prgCXC1123480_CINGULAR_LA
EROM: R3A022 prgCXC1250616_EROM_DB2020_HB106GENERIC_FOTA_SIMLOC K_FLAFLA_SIBLEY_SEMCUSB
ITP SW Version: CXC 1123323 R1E.
Customization: CDA 102774/102 R17A cxc1123364 R7AC001 CINGULAR.
UA version: CRH 1069179 R3B025.
6. Can I download the firmwares from another local w580 phone. If yes, how?
Thanking you all in anticipation of your valuable help.
Flashing MAIN+FS+Custom Will Debrand Your Phone. It Wont Unlock. To Unlock, You Should Use Remove SIM-lock patch generator - Top Sony Forums But Do This After Debranding. Since You Are New To All This Therefore Read General Information about Patch-Unlocking (start here if you want to unlock) - Top Sony Forums Before Strating Over. Since You Are In India, So Heres A MAIN+FS+Custom Combination For You.
MAIN: Downloads - R8BE001_RED52 - W580_R8BE001_MAIN_GENERIC_LA_RED52 - Top Sony Forums
FS: Downloads - R8BE001_RED52 - W580_R8BE001_FS_S_ASIA_LEVAN_RED52 - Top Sony Forums
Custom: Downloads - w580custpack - HB1-06_Gen_CDA102568_110_R8A_GENERIC_S_ASIA_LEVAN - Top Sony Forums
Since Your W580 Is Not In Dropdown List, So Use The 'Uploading Files Via FSX' To Unpack The Contents Of Custom Archive To "/tpa/preset/custom". For Your Last Question, NO. You Cant Download Firmware From Another Phone. Download Them From Download Area But Read This Before: How to get access to Download Area? - Top Sony Forums
I have a lot of information now. I'll download the firmware files, unlock & unbrand phone and will surely let you'll know the result. It's just that it might take some time as I'll be doing this for the first time.
Bye & thanks for your timely help.
if my phone gets damaged, is there any way to get it fixed?