SETool2 Lite v1.10 and v1.11 can patch DB2010 CID49 and DB2020 CID52 phones. Older versions can patch DB2010 CID49 ony...Quote:
Originally Posted by gurinder
By the way you cannot patch for free W200 phones because they are DB2012.
Printable View
SETool2 Lite v1.10 and v1.11 can patch DB2010 CID49 and DB2020 CID52 phones. Older versions can patch DB2010 CID49 ony...Quote:
Originally Posted by gurinder
By the way you cannot patch for free W200 phones because they are DB2012.
then my phone showing db2012, means this is not unlockable
can u talk me on yahoo messenger ???????
xulos: I checked your problem. I used k550_R1JD001_MAIN_GENERIC_LI_RED52.mbn and it works just fine. So I have no idea what is wrong... Do you use the latest version v2.1?
Here is the patch:
Code:;k550 SW-R1JD001
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4DBF68: 30B5041C00231A1C111C1C20A4F4 F0B505213A22ABF421FA0020F0BD
simox see if I will do it corectly!
Make Backup of GDFS with PhoneXS++ v 3.0 beta
open the program, click on conect button, then click on GDFS and after click on backup GDFS!!
Appling the patch on Setool2lite v1.1
open the programa, select the model k550i, mark "bypass DB2020 security", on misc file put the vkp patch who was generated with your tool and then I should click on flash or on write script? to send it to the phone!! (I dont wanna send the MAIN firmware to the phone, just the patch)
tanks for last answer!!!
It isn't PhoneXS++ just XS++;)Quote:
Originally Posted by vojar
You can backup the GDFS with SETool2 Lite too. Select the phone model and click on Read GDFS (be careful, press the right button) and follow the instructions. But you can use XS++ as well.
This cannot be done without MAIN firmware. Read this tutorial How to apply patches with SETool2 Lite V1.11.Quote:
I dont wanna send the MAIN firmware to the phone, just the patch
I got the same problem, we'll need to wait and pray to the guys solve a problem with DB2012 and CID 52 on next new release of setool2lite.Quote:
Originally Posted by gurinder
so doesn't have any free solution for our problem.
man my big apologise... i used 2.0 insetad of 2.1 version.. big thxQuote:
Originally Posted by simox
I've tested with a AT&T SonyEricsson W580i and it's works with 2.0. But I lost the flash menues.
ey simox
i've got DB2010 K510 R4EA031 RED 50 for unlock! i can make patch with your tool but qamaker write me : do not support that platform ? can you explain how to unlock him ?
qamaker supports DB2020 phones only, and K510 is a DB2010. The problem is that there isn't any free tool that supports DB2010 CID50 patching...Quote:
Originally Posted by xulos
kuolas:You used a branded firmware? Probably that is the cause, because this patch cannot disable the flash menus or anything else except the SIM-lock:D.Quote:
I've tested with a AT&T SonyEricsson W580i and it's works with 2.0. But I lost the flash menues.
that mean that i cannot unlock it? is it possible that the reason is cell is branded ?shpuld i denbrand it first then try unlock it ?
At the moment you cannot unlock it for free, even if you debrand it.Quote:
Originally Posted by xulos
This definately isnt fake i used it to unlock my v630(which has w660 firmware)Quote:
Originally Posted by simox
i generated a w660 unlock patch from the main firmware(mbn)
This worked fine with Far manager(with jdflasher plugin). But it didnt work with at all with setools lite. Far manger is better for patching!!
you can unlock any cid49/51/52 - db2010 or db2020 as long as you can find a working unlock patch and apply it with far managers jdflasher plugin
i have no clue about db2012 tho...
myebe you cannot unlock your mixed v630/w660 with patch...try to do with a "normal" main for v630...bdw it work correctly with my k550/w610...Meybe somethink is wrong with main w660 in v630 some incompatibles
Tanks for the intruction. so I did what was wrote on the topic, but when the SETOOL2lite was writing the srcipt who was generated with the qamaker. it show me a message like "some patch value diferet". the a click no a my phone wasn't turning on, so a just reflash the main without the script and the phone is still don't turnig on :confused:Quote:
Originally Posted by simox
what is wrong?? there are the two logs who was generated:
first log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Gustavo\Desktop\setool2lite1.11www.se-tuning.net\qamaker\quick_access_K550_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45A00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Elapsed:525 secs.
second log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:508 secs.
Same result. Still "Inactive SIM." This time's SEtool-output:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Administrator\Desktop\W850_R1KG001_MAIN_G ENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Administrator\Desktop\Remove_SIM_lock_W85 0_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:644 secs.
The "Inactive SIM" is NOT "Insert corret usim"!! This patch remove the SIM Network lock and NOT USIM-Lock feature of H3G Network!!Quote:
Originally Posted by Shitblast
You can use only the 3-usim provided with the phone. Olny after few months you can use other usim of the same network H3G.
Try another SIM of other Network, (exe. Vodafone..) and working... :D
There a way to kill a USIM-lock?
Well, the first problem can be solved if you use jdflasher instead of SETool2 Lite(it is a SETool2 Lite bug????). The second problem is that the flashing failed(so it is normal that your phone doens't turn on), because your FS is probably corrupted. So first reflash your phone completely(MAIN, FS, cust pack) with XS++, because it is easier to do with it. Then you can try again with SETool2 Lite, but probably it will fail again, so use jdflasher instead...Quote:
Originally Posted by vojar
I've checked the lock-status of my phone through "services" and then "SIM-lock." All five padlock-icons are shown as unlocked. I just now tried flashing with jdflasher, just to try, but still get the same error-message after entering PIN: "Inactive SIM," and a phone-handle with a bar over it.
tested on k610 R1GB001 and it works great :):):):):)
i have 2 unlocked phones now thanks simox :)
iv tested this for w810, k530, k610 & w660 firmware, all work fine :D
Tested it on w580i with original firmware and worked GREAT !!! I didn't have to flash the phone first with the generic MAIN CDA and FS files !!! You are the MAN Simox..
All 5 locks are ulocked !!! Thanks for your work!
Selected firmware: C:\w580i\flashfiles\W580_R8BA024_MAIN_GENERIC_LA_R ED52.mbn
Analyzing firmware...
BABE header found and seems ok.
Flash Platform: DB2020
Flash CID: 52
Flash Color: Red
Base address: 44140000
Generating raw firmware...
Firmware generated.
Searching for required addresses...
Addresses found.
Generating vkp patch...
"C:\SimUnlockgen\SIMLockPatchGen\vkp\Remove_SIM_lo ck_W580_R8BA024.vkp" patch file created.
FINISHED.
Can anyone help me? Setool has been running for a bout 5 hours now, still stuck on 'Going to execute VKP script' shall I press stop and start again? This is almost like bruteforcing =/ I am trying to unlock a k610 R1CB001
Quote:
Originally Posted by Ja$
did you upgrade to cid first??
Yes I upgraded it with XS++ to CID 52
There is something wrong because 5 hours are too much. I hope you backed up your GDFS. Do you use DCU-60 cable? Do you installed the USB flash driver that comes with SETool2 Lite v1.10/v1.11?
I think you can start again. If it doesn't works use jdflasher. Don't know why, but SETool2 Lite doesn't works for some people...
I am using the USB cable that came with the phone (DCU-60) I have the USB Flash drivers installed from a very long time ago (not the ones that come with SETool2 Lite v1.11, do I need to tick bypass db2020 security and use quick access patch? And how do I use jdflasher with far manager, I have opened it using alt+f2, but how do i apply the patch?
is there really NO free way of patching a db2010/2012 cid52 phone?
the patch-gen works great, but i can't get the vkp into my w200.
Tanks for the help, but I solve the problemin on this way, first I brought it back to life with SESU. :D, but I decide to try again and now my phone is unlocked!!! :D tanks for every thingQuote:
Originally Posted by simox
the mistake was that I wasn't put the MAIN on the field of files, but I was puting that on the field of firmeware upgrade!!! :p
and tanks again!!!:)
It is a unbranded Firmware, the 2.0 and 2.1 patch, in this case, it's the same. You can disable Flash menues from the cell itself?
First install the USB flash driver what comes with SETool2 Lite v1.11, this can be the cause of failure, then read this tutorial: How to apply patches with SETool2 Lite V1.11. The jdflasher tutorial is here: Quick Tutorial | Using Jdflasher To Patch Db2020Quote:
Originally Posted by Ja$
dxxbro:
No, there isn't any free tool that can apply patches to DB2010/DB2012 CID52 phones. Sorry...Quote:
is there really NO free way of patching a db2010/2012 cid52 phone?
the patch-gen works great, but i can't get the vkp into my w200.
kuolas:
If you set a non flash theme, I don't know other methods. Probably you made something wrong. Try the whole process again following a tutorial...Quote:
It is a unbranded Firmware, the 2.0 and 2.1 patch, in this case, it's the same. You can disable Flash menues from the cell itself?
Well, just wanted to report 2 sim-unlocking successes on 2 K800i - Vodafone UK and 3 network, using
1) XS++ 3.1
2) SETools2 1.11
3) Simlock Patch Generator 2.1
on
K800_R8BA024_MAIN_CHINA_WI_RED52
K800_R8BA024_FS_APAC_RED52
Many thanks Simox...:)
Is this Patch Generator can unlock PNX5230 CID52?
It is unable to generated unlock patches for PNX5230, and there isn't any free tool that can apply patches to PNX5230 phones..Quote:
Originally Posted by dsaxor
can you please give details steps on how to use the tools,because i have download them but i dont know how to use it to remove the network lock on my w580i.
please give detailed steps please
if you searched you had find tutorials
Tutorial on how to patch unlock DB2020 phones for free - Top Sony Forums
how do we know what firmware my W880i needs? its with voda
many thanks,
shane :)
better flash it with non branded firmware so you will know what it's inside
if you want to keep your present firmware, check this menu using mobile keyboard
>*<<*<*
right,star,left,left,star,left,star
JDFLASHER - When i select bflash it asks me to reinsert battery then automatically starts flashing the main, ( assuming its in the folder ) it started flashing any file that was in the folder thinking it was the main. It didnt let me select the file. Any suggestions?