no network and and manipulators button up doesnt work after c510 successfully unlocked..
what to do? full reflash vith A2 uploader ? cid is 52..
Printable View
no network and and manipulators button up doesnt work after c510 successfully unlocked..
what to do? full reflash vith A2 uploader ? cid is 52..
can anyone help do u have to have sim card in when unlocking phone or without sim card and how long do u have to press 2 and 5 for???
hello do u have to have sony ericsson pc suite installed for it to work when i plug i usb the aerix device doesnt detect anything it jus says press 2and 5 please help
just instal dyn gate drivers, you can find those in A2 uploader section by downloading with A2 uploader pack.Quote:
Originally Posted by tonybizzle
then just open Aerix. select phone model, then press UNLOCK near a model select section and then connect your usb lead to your TURNED OFF phone without or with sim card while holding 2+5, then just wayt few seconds until Aerix starts his work, then you can realise your finger from 2 an 5 :D
Quote:
Originally Posted by Dainius__
after FULL FLASH with latest CID52 firmware i got my network signal back, but UP button isn't working, probably HW error..
Brilliant.
Managed to unlock my W595 in seconds :)
nice share broo thx
After i see succesful mesage and restart my w910 on the phone screen apears "CONFIGURATION ERROR.PLEASE CONTACT YOUR NETWORK OPERATOR OR SERVICE CENTER"
Please help me to resolved this problem.
I would like to share my experience with Aerix as well. First of all - a big THANK YOU to all the creators of the program and for giving it for free to everyone!
What I did was:
- I charged my phone battery fully for 8 hours, even though it stated 'full' after the first 2 hours
- Installed the drivers using the 3rd Option (Automatic Installer) from this site Installing USB Flash Drivers for Sony Ericsson Flashing | SE Flashing
- Registered with Aerix
- Installed Aerix from here Free Sony Ericsson A2 phones Unlocking ! | SE Flashing
-Turned off my phone, took out the battery, then inserted it back again
- Followed the instructions from the first message from this topic.
The first time i got the 'Boot-ed via: EROM' error. After a while, I turned off my phone, took out the battery, inserted it back and tried the whole procedure again.. and it worked! Horray!
Then... the fast battery draining problem. I had do charge my battery every single night. Then I read in another forum (EXTREMELY GRATEFUL to the person, who wrote it there) and tried doing a Master Reset on my phone (after charging it fully first - no idea if it is necessary but I did it just in case). So far it looks great - 50% down in 2 days after listening to music and talking a lot. I hope to keep this effect forever! :D Make sure to keep elsewhere your contacts and pictures and messages before you do the Master Reset. Also turn off the 3G option from Settings / Connectivity / Mobile Networks and select the GSM only option.
Well, that's my epic story with my W705 phone. Hope I am helpful for someone out there :) Good luck! :)
Works so far great :) Thanks for this tip/app..
I got this code "Error code# 4EC98ECBA511ECBA" after reported success.
Anyone can tell me about detail of this error code?
Works for me...thank you so much..
didnt work for me with win7 64 but done it on vista 32 just had to put garaths gate usb drivers on works a treat
;)
hi i tried to unlock my w715 but unfortunatlly it didn't work, i think that there is a problem with the server because it told me:
21:28:23 Server communication…
21:28:50 e Cannot connect to server
21:28:50 e Check server host name and port in the settings
21:28:51 e Failed!
what must i do??? :(
hi i tried to unlock my w715 for two hours but it didn't work i think that there is a problem with the server because it was written :
21:28:23 Server communication…
21:28:50 e Cannot connect to server
21:28:50 e Check server host name and port in the settings
21:28:51 e Failed!
what must i do??? i need help please!! :(
i get this error while trying to unlock my c510 with aerix...i have the newest soft with SEUS...still becoming this error...i have debranded him from T-mobile and still getting same error while trying to unlock...any sugesstion???Quote:
628294B8B19C2AA4
is that true that this soft is made by cruiser team?
coz lazer said after dismantelling the program he found kukuruzers inside it...
i use this tool and its great.
better than setool nor cruiser :D
coz its free
Hi each time i tried to unlock my c901 this message appears
Code:Action journal
21:34:33 Instructions
21:34:33 Please connect the phone via USB while holding 2-5…
21:34:33 . The action name is 'Unlock'
21:34:33 . The action started waiting for the user
21:34:38 . The action finished waiting for the user
21:34:38 Connecting via Generic EMP USB Flash Device (USB1) (ver. 2.2.0.5)
21:34:39 Connecting to the baseband...
21:34:39 Entering service mode...
21:34:39 Detected chipset: DB3210 P1A/P1B
21:34:39 Boot-ed via: ROM
21:34:40 Sending loader...
21:34:45 e Failed!
21:34:45 . The action reported failure
Error code
# 628294B8B19C2AA4
Error details
---
04 71 98 80 2F 47 9F E4 8D 30 CB 1D 27 1C C9 39
64 C2 B3 91 31 0A CF FE 44 77 86 DA D9 B3 99 04
15 60 90 1B 7E 41 AF 1D ED 5E D5 D2 C5 CB 83 D4
95 C7 BD B0 91 DC 1A 3A E7 32 0B D9 17 8E C7 16
8F 82 43 F7 11 5B A1 24 B3 74 72 CF A3 0D 59 CD
DB BA 5D 3A 18 98 D4 50 AD 13 45 58 B7 98 8D A3
F3 AF 7D 01 5F 26 BF 4E CC 83 DD 24 57 C3 A9 B4
85 6C 2B F1 C2 98 41 6D 5D 2E 1B 86 A9 B2 79 5C
CB 0A 33 00 51 57 E1 9C 0D 4C B5 89 A7 42 49 6C
E4 3D CD 5C B1 76 4F 7A 43 4E 7B 6C 43 C6 8B 03
---
I love you, it didnt work wen i was holding c so i pressed 2 + 5 and it worked,
if i use this to unlock a c905a
will i get the wifi
heard that if u debrand it u get wifi
for some reason at&t disabled it :mad:
you might, but you need to debrand it first to get wifiQuote:
Originally Posted by golferbrad
is unlocking it and debranding the same thing or not
totally different, debranding means putting/flashing GENERIC firmware but not unlock and unlock means making your phone to use any provider.
http://ezlaptop.com/banner3.gif
EZLaptop.com Click here to WIN laptop
is very hard to debrand a phone
where do i get the stuff to do it
Read tutorial here : [Debrand] A2 (Db3150) Tutorial - Top Sony Forums
or Here for flashing : A2-DB3150 Flashing - Top Sony Forums
You can get the firmware files in the download section.
http://ezlaptop.com/banner3.gif
EZLaptop.com Click here to WIN laptop for free
where is the link??
Look at the top bar of this page or click here : Top Sony - Download
I have a problem:
Booted via erom. Can anyone help me? Why at me does not boot via ROM?
Did you turned off the phone before starting the unlock procedure ?
Yes i did.
Only 1 problem.
Booted via EROM and not via ROM.
can anyone tell me what's the diferrence between unlocking and debranding?....I;ve just unlocked my C510 and now I want to debrand it....HOW?
unlocking means that your phone is sim free...debranding is when you flash your phone to a generic firmwere and after that you can add stuff to the phone like flash menus...acoustics etc...
A2-DB3150 Flashing - Top Sony ForumsQuote:
Originally Posted by BobO
Can anyone help me with my issue? It is really annoying
Aerix is unable to unluck my pink W595. Yes, it did not work. I followed the instructions step by step, but it did not work. So, I do know know why they say it is able to unluck W595???? Is there anyone who did it with W595? I want to know how he/she did it. Mine is lucked to the British T-mobile. Any help!!
Look through this thread, some of us has successfully unlock W595Quote:
Originally Posted by maomao
how can I open (unscrew) my w902?
I have some problems with the display
I'm having a problem, can anyone help?????? Trying to unlock c905 using Aerix...but there is an error:
Code:Action journal
12:11:07 Instructions
12:11:07 Please connect the phone via USB while holding 2-5…
12:11:07 . The action name is 'Unlock'
12:11:07 . The action started waiting for the user
12:15:39 . The action finished waiting for the user
12:15:39 Connecting via Generic EMP USB Flash Device (USB1) (ver. 2.2.0.5)
12:15:40 Connecting to the baseband...
12:15:40 Entering service mode...
12:15:40 Detected chipset: DB3210 P1A/P1B
12:15:40 Boot-ed via: ROM
12:15:41 Sending loader...
12:15:46 e Failed!
12:15:46 . The action reported failure
Error code
# 628294B8B19C2AA4
Error details
---
26 21 3B 30 5F 77 71 34 FD 00 BB 54 49 61 27 12
29 F4 7D C1 A1 26 41 4E D4 DB 96 5A 57 3F A9 4C
7B 6C 80 6B 30 B1 BF 4D A3 2E E5 72 AB 67 93 7C
9B 17 CD 00 FF 0C D4 4A 89 9E E5 99 A7 BE B7 66
1F B2 53 27 1F 97 4F 74 43 B8 7C EF 33 21 B7 65
95 EA 93 2A 76 C8 DA E0 3D C3 AB A8 47 68 BD 13
63 DF 6D D1 11 56 51 9E 7C 73 13 F4 39 13 B9 64
0B C0 DB 21 52 C8 71 65 33 FE F5 36 19 82 89 54
5B C6 DD B0 DF 9B F1 4C 83 80 3B D9 C9 EE A7 BC
AA ED 03 CC 21 A6 3F CA 2D E2 6B EC CD 4A BB 4B
---
xulos
can you unlock my W350i?
Xulos
Here is the IMEI 354173030926213....
many thanks...