Printable View
im struggling with Setools, i connect my phone to my usb click read GDFS and nothing happens.
My phone was recently repaired so i guess it's got the latest firmware on it, how can i tell what version of firmware im running? Could this be causing a problem?
Should the phone be in phone or file transfer mode when attached to my PC?
Thanks
Daz
If you want to connect to setool you should turn of the phone and then follow what setool says.Quote:
Originally Posted by daz_75
Nice day
Hi all,
Ive just tried this method to unlock my K800, and now when the phone boots up, it comes up with a error message which reads:
"Configuration error. Please contact your network operator or service centre"
Any ideas what could be causing this problem? Ive tried it twice and the same result happens. When I flash back to R1KG001 Generic firmware, the phone starts up fine (although is sim locked).
Thanks
You need to customize your phone. Here is a flashing guide: XS++ 2.x Guide.
work with w880 or not?
What is Remove SIM-lock?
after flasing my w810i comes up with a red screen and says! please wait
with a progress bar under that, it gets 1/4 way up and stops. left it all night untill my bat went flat, still the same, can anybody please help me on this, or do i put it in the bin. this is my read out of the phone
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233701703410 CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35906400043902
Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_2
CDA article: CDA102494/133
CDA version: R1A
Default article: cxc1250324
Default version: R4DB005
Operator: 000-00
USERCODE:0000
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
Elapsed:7 secs.
many thanks to all replys
I can't get this part to work!!! WHen i press C and plug in phone the phone starts up automatically and it wants to install w580i software..(my phone is w500i flashed to w580i)Quote:
III. We will apply the generated unlock patch to unlock the phone.
With SETool2 Lite v1.11:
1. Click on Clear button.
2. Select your phone model.
3. Tick Use "quick access" patch checkbox
4. Uncheck(remove the tick from) Bypass DB2020 security checkbox.
5. Click on ... (three dots) button near MISC files box, and select the vkp file generated by SIMLockPatchGen.
6. Click Write SCRIPT button
7. Follow the instructions in left status window...
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.
Also i ignored this step:
What qmaker?? I just put main firmware in that folder (i had to create one)Quote:
2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\ANNJENN\Desktop\unlock\qamaker\W580_R6BC0 02_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\ANNJENN\Desktop\unlock\SIMLockPatchGen\vk p\Remove_SIM_lock_W580_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:638 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:46 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:74 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:53 secs.
Hi.
I have just tried this method to unclock my k800 and now my fone comes up with a message:
- (Configuration error. Please contact your network operator or service centre)
I don't forget backup GDFS before flash fone :( Any ideas what could be causing this problem???
My FW: Main: k810-R8BA024-Generic
FS: Apac
Sorry English bad....